一种低膨胀高刚性的炭纤维网络增强聚丙烯复合材料

袁剑民; 冯艳荣; 吴振军; 王彦军; 李丝雨; 孙萍

一种低膨胀高刚性的炭纤维网络增强聚丙烯复合材料

1.
湖南大学材料科学与工程学院, 湖南长沙 410082;
2.
湖南大学化学化工学院, 湖南长沙 410082

基金项目: 湖南省科技计划项目（2014FJ4018）.

详细信息

通讯作者:
袁剑民,博士,讲师.E-mail:pangyuan2916@126.com

中图分类号: TQ342⁺.74
计量
- 文章访问数: 374
- HTML全文浏览量: 59
- PDF下载量: 580
- 被引次数: 0
出版历程
- 收稿日期: 2017-02-10
- 录用日期: 2017-06-28
- 修回日期: 2017-05-26
- 刊出日期: 2017-06-28

A carbon fiber network/polypropylene composite with a low thermal expansion coefficient and high stiffness

1.
College of Material Science and Engineering, Hunan University, Changsha 410082, China;
2.
College of Chemistry and Chemical Engineering, Hunan University, Changsha 410082, China

Funds: Science and Technology Planning Project of Hunan Province (2014FJ4018).

摘要

摘要: 利用酚醛树脂粘接短切炭纤维，炭化得到全炭型的稳固炭纤维网络增强体（CFNR），真空浸胶后制得一种低膨胀、高刚性的CFNR/聚丙烯（PP）复合材料。利用扫描电镜和热机械分析仪对CFNR/PP复合材料的微观结构和热机械性能进行表征。结果表明，在相同的载荷条件下，常规短切炭纤维（SCF）/PP复合材料的形变是CFNR/PP复合材料的2.3倍。相同温度下，CFNR/PP复合材料、SCF/PP复合材料和PP的储能模量和弯曲模量都依次下降。在30℃和110℃时，CFNR/PP复合材料的弯曲模量分别为SCF/PP复合材料的1.8倍和2.5倍。而且，CFNR/PP复合材料具有较高的热尺寸稳定性，其平均热膨胀系数（30~120℃）是SCF/PP复合材料的1/4。可见，与松散的短切炭纤维网络增强结构相比，CFNR在提高聚合物复合材料的刚性和热尺寸稳定性方面更有效。
- 炭纤维网络增强体 /
- 热机械性能 /
- 刚性 /
- 模量 /
- 热膨胀系数
Abstract: A carbon fiber network reinforcement (CFNR) was prepared by bonding short carbon fibers with phenol formaldehyde resin followed by carbonization.The CFNR was vacuum-impregnated with molten polypropylene (PP) to produce a CFNR/PP composite with a low thermal expansion coefficient and high stiffness.The microstructure and thermal mechanical properties of the composite were characterized by scanning electron microscopy and thermal mechanical tests.Results show that CFNR is more effective in improving the stiffness and thermal dimensional stability of polymer matrix composites than short carbon fibers.The deformation rate of a conventional short carbon fiber (SCF)/PP composite is 2.3 times higher than that of the CFNR/PP composite under the same load.The decreasing order of the storage and bend moduli is CFNR/PP > SCF/PP > PP.The bend moduli of the CFNR/PP composite at 30 and 110℃ are about 1.8 and 2.5 times that of the SCF/PP composite,respectively.The average thermal expansion coefficient of the CFNR/PP composite between 30 to 120℃ is 25% of that of the SCF/PP composite.
- Carbon fiber network reinforcement /
- Thermal mechanical property /
- Stiffness /
- Modulus /
- Thermal expansion coefficient

HTML全文

下载: 全尺寸图片幻灯片

参考文献(15)

Fitzer E. The future of carbon-carbon composites[J]. Carbon, 1987, 25(2):163-190.

Hong M-S, Choi W K, An K H, et al. Electromagnetic interference shielding behaviors of carbon fibers-reinforced polypropylene matrix composites:Ⅱ. Effects of filler length control[J]. Journal of Industrial and Engineering Chemistry, 2014, 20(5):3901-3904.

Nascimento J F, Ezquerra T A, Seferis J C. Anisotropy of electrical conductivity and structure in polymer-carbon fiber composite materials[J]. Polymer Composites, 1995, 16(2):109-113.

Sánchez-Adsuar M S, Linares-Solano A, Cazorla-Amorós D, et al. Influence of the nature and the content of carbon fiber on properties of thermoplastic polyurethane-carbon fiber composites[J]. Journal of Applied Polymer Science, 2003, 90(10):2676-2683.

谢和平, 刘雄祥. 聚丙烯/玻璃纤维复合材料注塑工艺条件研究[J]. 工程塑料应用, 2009, 37(7):43-45. (XIE He-ping, LIU Xiong-xiang. Research of injection molding process conditions of polypropylene/glass fiber composite[J]. Engineering Plastics Application, 2009, 37(7):43-45.)

Cho S M, Jung H T. Highly enhanced mechanical properties of polypropylene-long carbon fiber composites by a combined method of coupling agent and surface modification of long carbon fiber[J]. Macromolecular Research, 2014, 22(10):1066-1073.

Wang C B, Ying S J. Batch foaming of short carbon fiber reinforced polypropylene composites[J]. Fibers and Polymers, 2013, 14(5):815-821.

Lee E S, Kim J S, Kim K Y, et al. Preparation of polypropylene composites reinforced with long carbon fibers and their properties[J]. Fibers and Polymers, 2014, 15(12):2613-2617.

Davis I J, Rawlings R D. Microstructural investigation of low-density carbon-carbon composites[J]. Journal of materials science, 1994, 29(2):338-344.

Burchell T D, Judkins R R. A novel carbon fiber based material and separation technology[J]. Energy conversion and management, 1997, 38:99-104.

Kimber G M, Jagtoyen M, Fei Y Q, et al. Fabrication of carbon fiber composites for gas separation[J]. Gas separation & purification, 1996, 10(2):131-136.

Liu C, Han J C, Zhang X H, et al. Lightweight carbon-bonded carbon fiber composites prepared by pressure filtration technique[J]. Carbon, 2013, 59:551-554.

赵玉飞, 袁剑民, 费又庆. 炭纤维网络增强环氧树脂基复合材料的制备与表征[J]. 复合材料学报, 2015, 32(6):54-60. (ZHAO Yu-fei, YUAN Jian-min, FEI You-qing. Fabrication and characterization of short carbon fiber network reinforced epoxy matrix composites[J]. Acta Materiae Compositae Sinica, 2015, 32(6):54-60.)

王闯, 李克智, 李贺军等. 短切炭纤维的CVI处理及其在CFRC中的分散性[J]. 复合材料学报, 2007, 24(1):135-140. (WANG Chuang, LI Ke-zhi, LI He-jun, et al. CVI treatment of short carbon fibers and their dispersion in CFRC[J]. Acta Materiae Compositae Sinica, 2007, 24(1):135-140.)

Matthias Wagner, 陆立明译. 热分析应用基础[M]. 上海:东华大学出版社, 2011:130-131. (Wagner M, Translated by LU Li-ming. Thermal Analysis in Practice[M]. Shanghai:Donghua University Press, 2011:130-131.)

施引文献

资源附件(0)

访问统计