YUAN Jian-min, FENG Yan-rong, WU Zhen-jun, WANG Yan-jun, LI Si-yu, SUN Ping. A carbon fiber network/polypropylene composite with a low thermal expansion coefficient and high stiffness. New Carbon Mater., 2017, 32(3): 271-276.
Citation: YUAN Jian-min, FENG Yan-rong, WU Zhen-jun, WANG Yan-jun, LI Si-yu, SUN Ping. A carbon fiber network/polypropylene composite with a low thermal expansion coefficient and high stiffness. New Carbon Mater., 2017, 32(3): 271-276.

A carbon fiber network/polypropylene composite with a low thermal expansion coefficient and high stiffness

Funds:  Science and Technology Planning Project of Hunan Province (2014FJ4018).
  • Received Date: 2017-02-10
  • Accepted Date: 2017-06-28
  • Rev Recd Date: 2017-05-26
  • Publish Date: 2017-06-28
  • A carbon fiber network reinforcement (CFNR) was prepared by bonding short carbon fibers with phenol formaldehyde resin followed by carbonization.The CFNR was vacuum-impregnated with molten polypropylene (PP) to produce a CFNR/PP composite with a low thermal expansion coefficient and high stiffness.The microstructure and thermal mechanical properties of the composite were characterized by scanning electron microscopy and thermal mechanical tests.Results show that CFNR is more effective in improving the stiffness and thermal dimensional stability of polymer matrix composites than short carbon fibers.The deformation rate of a conventional short carbon fiber (SCF)/PP composite is 2.3 times higher than that of the CFNR/PP composite under the same load.The decreasing order of the storage and bend moduli is CFNR/PP > SCF/PP > PP.The bend moduli of the CFNR/PP composite at 30 and 110℃ are about 1.8 and 2.5 times that of the SCF/PP composite,respectively.The average thermal expansion coefficient of the CFNR/PP composite between 30 to 120℃ is 25% of that of the SCF/PP composite.
  • loading
  • Fitzer E. The future of carbon-carbon composites[J]. Carbon, 1987, 25(2):163-190.
    Hong M-S, Choi W K, An K H, et al. Electromagnetic interference shielding behaviors of carbon fibers-reinforced polypropylene matrix composites:Ⅱ. Effects of filler length control[J]. Journal of Industrial and Engineering Chemistry, 2014, 20(5):3901-3904.
    Nascimento J F, Ezquerra T A, Seferis J C. Anisotropy of electrical conductivity and structure in polymer-carbon fiber composite materials[J]. Polymer Composites, 1995, 16(2):109-113.
    Sánchez-Adsuar M S, Linares-Solano A, Cazorla-Amorós D, et al. Influence of the nature and the content of carbon fiber on properties of thermoplastic polyurethane-carbon fiber composites[J]. Journal of Applied Polymer Science, 2003, 90(10):2676-2683.
    谢和平, 刘雄祥. 聚丙烯/玻璃纤维复合材料注塑工艺条件研究[J]. 工程塑料应用, 2009, 37(7):43-45. (XIE He-ping, LIU Xiong-xiang. Research of injection molding process conditions of polypropylene/glass fiber composite[J]. Engineering Plastics Application, 2009, 37(7):43-45.)
    Cho S M, Jung H T. Highly enhanced mechanical properties of polypropylene-long carbon fiber composites by a combined method of coupling agent and surface modification of long carbon fiber[J]. Macromolecular Research, 2014, 22(10):1066-1073.
    Wang C B, Ying S J. Batch foaming of short carbon fiber reinforced polypropylene composites[J]. Fibers and Polymers, 2013, 14(5):815-821.
    Lee E S, Kim J S, Kim K Y, et al. Preparation of polypropylene composites reinforced with long carbon fibers and their properties[J]. Fibers and Polymers, 2014, 15(12):2613-2617.
    Davis I J, Rawlings R D. Microstructural investigation of low-density carbon-carbon composites[J]. Journal of materials science, 1994, 29(2):338-344.
    Burchell T D, Judkins R R. A novel carbon fiber based material and separation technology[J]. Energy conversion and management, 1997, 38:99-104.
    Kimber G M, Jagtoyen M, Fei Y Q, et al. Fabrication of carbon fiber composites for gas separation[J]. Gas separation & purification, 1996, 10(2):131-136.
    Liu C, Han J C, Zhang X H, et al. Lightweight carbon-bonded carbon fiber composites prepared by pressure filtration technique[J]. Carbon, 2013, 59:551-554.
    赵玉飞, 袁剑民, 费又庆. 炭纤维网络增强环氧树脂基复合材料的制备与表征[J]. 复合材料学报, 2015, 32(6):54-60. (ZHAO Yu-fei, YUAN Jian-min, FEI You-qing. Fabrication and characterization of short carbon fiber network reinforced epoxy matrix composites[J]. Acta Materiae Compositae Sinica, 2015, 32(6):54-60.)
    王闯, 李克智, 李贺军等. 短切炭纤维的CVI处理及其在CFRC中的分散性[J]. 复合材料学报, 2007, 24(1):135-140. (WANG Chuang, LI Ke-zhi, LI He-jun, et al. CVI treatment of short carbon fibers and their dispersion in CFRC[J]. Acta Materiae Compositae Sinica, 2007, 24(1):135-140.)
    Matthias Wagner, 陆立明译. 热分析应用基础[M]. 上海:东华大学出版社, 2011:130-131. (Wagner M, Translated by LU Li-ming. Thermal Analysis in Practice[M]. Shanghai:Donghua University Press, 2011:130-131.)
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(1)

    Article Metrics

    Article Views(365) PDF Downloads(580) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return