Citation: | LI Hao-jie, LIU Yao-dong. A review of polymer-derived carbon molecular sieve membranes for gas separation. New Carbon Mater., 2022, 37(3): 484-507. doi: 10.1016/S1872-5805(22)60613-9 |
[1] |
Pinnau I, Freeman B D. Formation and Modification of Polymeric Membranes: Overview[M]. Membrane Formation and Modification. Washington: American Chemical Society, 1999, 1-22.
|
[2] |
Koresh J E, Soffer A. Mechanism of permeation through molecular-sieve carbon membranev[J]. Journal of the Chemical Society, Faraday Transactions,1986,82:2057-2063. doi: 10.1039/f19868202057
|
[3] |
Koresh J. Study of molecular sieve carbons: the langmuir modelin ultramicroporous adsorbents[J]. Journal of Colloid and Interface Science,1982,88(2):398-406. doi: 10.1016/0021-9797(82)90268-5
|
[4] |
Koresh J, Soffe A. Study of molecular sieve carbons part 1.-pore structure, gradual pore opening and mechanism of molecular sieving[J]. Journal of the Chemical Society, Faraday Transactions,1980,76:2457-2471. doi: 10.1039/f19807602457
|
[5] |
Adams J S, Itta A K, Zhang C, et al. New insights into structural evolution in carbon molecular sieve membranes during pyrolysis[J]. Carbon,2019,141:238-246. doi: 10.1016/j.carbon.2018.09.039
|
[6] |
Hamm J B S, Ambrosi A, Griebeler J G, et al. Recent advances in the development of supported carbon membranes for gas separation[J]. International Journal of Hydrogen Energy,2017,42(39):24830-24845. doi: 10.1016/j.ijhydene.2017.08.071
|
[7] |
Kiyono M, Williams P J, Koros W J. Effect of polymer precursors on carbon molecular sieve structure and separation performance properties[J]. Carbon,2010,48(15):4432-4441. doi: 10.1016/j.carbon.2010.08.002
|
[8] |
Rungta M, Xu L, Koros W J. Carbon molecular sieve dense film membranes derived from Matrimid® for ethylene/ethane separation[J]. Carbon,2012,50(4):1488-1502. doi: 10.1016/j.carbon.2011.11.019
|
[9] |
Kiyono M, Williams P J, Koros W J. Effect of pyrolysis atmosphere on separation performance of carbon molecular sieve membranes[J]. Journal of Membrane Science,2010,359(1-2):2-10. doi: 10.1016/j.memsci.2009.10.019
|
[10] |
Ismail N H, Salleh W N W, Sazali N, et al. Disk supported carbon membrane via spray coating method: Effect of carbonization temperature and atmosphere[J]. Separation and Purification Technology,2018,195:295-304. doi: 10.1016/j.seppur.2017.12.032
|
[11] |
Sazali N, Salleh W N W, Ismail A F, et al. Impact of stabilization environment and heating rates on P84 co-polyimide/nanocrystaline cellulose carbon membrane for hydrogen enrichment[J]. International Journal of Hydrogen Energy,2019,44(37):20924-20932. doi: 10.1016/j.ijhydene.2018.06.039
|
[12] |
Kamath M G, Fu S, Itta A K, et al. 6FDA-DETDA: DABE polyimide-derived carbon molecular sieve hollow fiber membranes: Circumventing unusual aging phenomena[J]. Journal of Membrane Science,2018,546:197-205. doi: 10.1016/j.memsci.2017.10.020
|
[13] |
Kamath M G, Itta A K, Hays S S, et al. Pyrolysis end-doping to optimize transport properties of carbon molecular sieve hHollow fiber membranes[J]. Industrial & Engineering Chemistry Research,2020,59(30):13755-13761.
|
[14] |
Wan Salleh W N, Ismail A F. Effect of stabilization temperature on gas permeation properties of carbon hollow fiber membrane[J]. Journal of Applied Polymer Science,2013,127(4):2840-2846. doi: 10.1002/app.37621
|
[15] |
Suda H, Harayav K. Molecular sieving effect of carbonized kapton polyimide membrane[J]. Journal of the Chemical Society, Chemical Communications,1995:1179-1180.
|
[16] |
Jones C w, Koros W j. Carbon molecular sieve gas separation membranes-I. Preparation and characterization based on polyimide precursors[J]. Carbon,1994,32:1419-1425. doi: 10.1016/0008-6223(94)90135-X
|
[17] |
Sulub-Sulub R, Loría-Bastarrachea M I, Vázquez-Torres H, et al. Highly permeable polyimide membranes with a structural pyrene containing tert-butyl groups: Synthesis, characterization and gas transport[J]. Journal of Membrane Science,2018,563:134-141. doi: 10.1016/j.memsci.2018.05.054
|
[18] |
Jia M, Zhou M, Li Y, et al. Construction of semi-fluorinated polyimides with perfluorocyclobutyl aryl ether-based side chains[J]. Polymer Chemistry,2018,9(7):920-930. doi: 10.1039/C8PY00004B
|
[19] |
Xu Y, Chen C, Li J. Experimental study on physical properties and pervaporation performances of polyimide membranes[J]. Chemical Engineering Science,2007,62(9):2466-2473. doi: 10.1016/j.ces.2007.01.019
|
[20] |
Hou M, Qi W, Li L, et al. Carbon molecular sieve membrane with tunable microstructure for CO2 separation: Effect of multiscale structures of polyimide precursors[J]. Journal of Membrane Science,2021:635.
|
[21] |
Liang J, Wang Z, Huang M, et al. Effects on carbon molecular sieve membrane properties for a precursor polyimide with simultaneous flatness and contortion in the repeat unit[J]. ChemSusChem,2020,13(20):5531-5538. doi: 10.1002/cssc.202001572
|
[22] |
Qiu W, Li F S, Fu S, et al. Isomer-tailored carbon molecular sieve membranes with high gas separation performance[J]. ChemSusChem,2020,13(19):5318-5328. doi: 10.1002/cssc.202001567
|
[23] |
Park H. Relationship between chemical structure of aromatic polyimides and gas permeation properties of their carbon molecular sieve membranes[J]. Journal of Membrane Science,2004,229(1-2):117-127. doi: 10.1016/j.memsci.2003.10.023
|
[24] |
Wang Z, Ren H, Zhang S, et al. Carbon molecular sieve membranes derived from troger's base-based microporous polyimide for gas separation[J]. ChemSusChem,2018,11(5):916-923. doi: 10.1002/cssc.201702243
|
[25] |
Hu C P, Polintan C K, Tayo L L, et al. The gas separation performance adjustment of carbon molecular sieve membrane depending on the chain rigidity and free volume characteristic of the polymeric precursor[J]. Carbon,2019,143:343-351. doi: 10.1016/j.carbon.2018.11.037
|
[26] |
Xiao Y, Dai Y, Chung T S, et al. Effects of brominating matrimid polyimide on the physical and gas transport properties of derived carbon membranes[J]. Macromolecules,2005,38:10042-10049. doi: 10.1021/ma051354j
|
[27] |
Fu S, Sanders E S, Kulkarni S S, et al. Carbon molecular sieve membrane structure–property relationships for four novel 6FDA based polyimide precursors[J]. Journal of Membrane Science,2015,487:60-73. doi: 10.1016/j.memsci.2015.03.079
|
[28] |
Qiu W, Zhang K, Li F S, et al. Gas separation performance of carbon molecular sieve membranes based on 6FDA-mPDA/DABA (3: 2) polyimide[J]. ChemSusChem,2014,7(4):1186-1194. doi: 10.1002/cssc.201300851
|
[29] |
Qiu W, Xu L, Chen C C, et al. Gas separation performance of 6FDA-based polyimides with different chemical structures[J]. Polymer,2013,54(22):6226-6235. doi: 10.1016/j.polymer.2013.09.007
|
[30] |
Wang Q, Huang F, Cornelius C J, et al. Carbon molecular sieve membranes derived from crosslinkable polyimides for CO2/CH4 and C2H4/C2H6 separations[J]. Journal of Membrane Science,2021:621.
|
[31] |
Karunaweera C, Musselman I H, Balkus K J, et al. Fabrication and characterization of aging resistant carbon molecular sieve membranes for C3 separation using high molecular weight crosslinkable polyimide, 6FDA-DABA[J]. Journal of Membrane Science,2019,581:430-438. doi: 10.1016/j.memsci.2019.03.065
|
[32] |
Deng G, Wang Y, Zong X, et al. Structure evolution in carbon molecular sieve membranes derived from binaphthol-6FDA polyimide and their gas separation performance[J]. Journal of Industrial and Engineering Chemistry,2021,94:489-497. doi: 10.1016/j.jiec.2020.11.024
|
[33] |
Li W, Goh K, Chuah C Y, et al. Mixed-matrix carbon molecular sieve membranes using hierarchical zeolite: A simple approach towards high CO2 permeability enhancements[J]. Journal of Membrane Science,2019,588:117220. doi: 10.1016/j.memsci.2019.117220
|
[34] |
Xiao Y, Chung T S, Chng M L, et al. Structure and properties relationships for aromatic polyimides and their derived carbon membranes: Experimental and simulation approaches[J]. The Journal of Physical Chemistry B,2005,109:18741-18748. doi: 10.1021/jp050177l
|
[35] |
Sazali N, Salleh W N W, Ismail A F, et al. Incorporation of thermally labile additives in polyimide carbon membrane for hydrogen separation[J]. International Journal of Hydrogen Energy,2021,46(48):24855-24863. doi: 10.1016/j.ijhydene.2020.10.218
|
[36] |
Li H, Xu S, Zhao B, et al. The phase structural evolution and gas separation performances of cellulose acetate/polyimide composite membrane from polymer to carbon stage[J]. Membranes, 2021, 11(8).
|
[37] |
Shin J H, Yu H J, Park J, et al. Fluorine-containing polyimide/polysilsesquioxane carbon molecular sieve membranes and techno-economic evaluation thereof for C3H6/C3H8 separation[J]. Journal of Membrane Science,2020,598:117660. doi: 10.1016/j.memsci.2019.117660
|
[38] |
Jiao W, Ban Y, Shi Z, et al. High performance carbon molecular sieving membranes derived from pyrolysis of metal-organic framework ZIF-108 doped polyimide matrices[J]. Chemical Communications,2016,52(95):13779-13782. doi: 10.1039/C6CC07833H
|
[39] |
Lo C T, Seifert S, Thiyagarajan P, et al. Effect of polydispersity on the phase behavior of polymer blends[J]. Macromolecular Rapid Communicaitons,2005,26(7):533-536. doi: 10.1002/marc.200400574
|
[40] |
H Hatori, T. Kobayashi, Y. Hanzawa Y Y, et al. Mesoporous carbon membranes from polyimide blended with poly(ethylene glycol)[J]. Journal of Applied Polymer Science,2001,79:836-841. doi: 10.1002/1097-4628(20010131)79:5<836::AID-APP80>3.0.CO;2-1
|
[41] |
Shin J H, Yu H J, An H, et al. Rigid double-stranded siloxane-induced high-flux carbon molecular sieve hollow fiber membranes for CO2/CH4 separation[J]. Journal of Membrane Science,2019,570-571:504-512. doi: 10.1016/j.memsci.2018.10.076
|
[42] |
Fu Y J, Hu C C, Lin D W, et al. Adjustable microstructure carbon molecular sieve membranes derived from thermally stable polyetherimide/polyimide blends for gas separation[J]. Carbon,2017,113:10-17. doi: 10.1016/j.carbon.2016.11.026
|
[43] |
Hosseini S S, Omidkhah M R, Zarringhalam Moghaddam A, et al. Enhancing the properties and gas separation performance of PBI–polyimides blend carbon molecular sieve membranes via optimization of the pyrolysis process[J]. Separation and Purification Technology,2014,122:278-289. doi: 10.1016/j.seppur.2013.11.021
|
[44] |
Chuah C Y, Lee J, Bao Y, et al. High-performance porous carbon-zeolite mixed-matrix membranes for CO2/N2 separation[J]. Journal of Membrane Science,2021:622.
|
[45] |
Wang F, Zhang B, Liu S, et al. Investigation of the attapulgite hybrid carbon molecular sieving membranes for permanent gas separation[J]. Chemical Engineering Research & Design,2019,151:146-156.
|
[46] |
Chu Y H, Yancey D, Xu L, et al. Iron-containing carbon molecular sieve membranes for advanced olefin/paraffin separations[J]. Journal of Membrane Science,2018,548:609-620. doi: 10.1016/j.memsci.2017.11.052
|
[47] |
Kim Y. Carbon molecular sieve membranes derived from metal-substituted sulfonated polyimide and their gas separation properties[J]. Journal of Membrane Science,2003,226(1-2):145-158. doi: 10.1016/j.memsci.2003.08.017
|
[48] |
Katsaros F K, Steriotis T A, Romanos G E, et al. Preparation and characterisation of gas selective microporous carbon membranes[J]. Microporous Mesoporous Materials,2007,99(1-2):181-189. doi: 10.1016/j.micromeso.2006.07.041
|
[49] |
Roy S, Das R, Gagrai M K, et al. Preparation of carbon molecular sieve membrane derived from phenolic resin over macroporous clay-alumina based support for hydrogen separation[J]. Journal of Porous Materials,2016,23(6):1653-1662. doi: 10.1007/s10934-016-0226-8
|
[50] |
Centeno T A, Vilas J L, Fuertes A B. Effects of phenolic resin pyrolysis conditions on carbon membrane performance for gas separation[J]. Journal of Membrane Science,2004,228(1):45-54. doi: 10.1016/j.memsci.2003.09.010
|
[51] |
Fuertes A B, Menendez I. Separation of hydrocarbon gas mixtures using phenolic resin-based carbon membranes[J]. Separation and Purification Technology,2002,28:29-41. doi: 10.1016/S1383-5866(02)00006-0
|
[52] |
Fuertes A B. Effect of air oxidation on gas separation properties of adsorption-selective carbon membranes[J]. Carbon,2001,39:697-706. doi: 10.1016/S0008-6223(00)00168-8
|
[53] |
Centeno T A, Fuertes A B. Supported carbon molecular sieve membranes based on a phenolic resin[J]. Journal of Membrane Science,1999,160:201-211. doi: 10.1016/S0376-7388(99)00083-6
|
[54] |
Centeno T A, Fuertes A B. Carbon molecular sieve membranes derived from a phenolic resin supported on porous ceramic tubes[J]. Separation and Purification Technology,2001,25:379-384. doi: 10.1016/S1383-5866(01)00065-X
|
[55] |
Jung C H, Kim G W, Han S H, et al. Gas separation of pyrolyzed polymeric membranes: Effect of polymer precursor and pyrolysis conditions[J]. Macromolecular Research,2007,15(6):565-574. doi: 10.1007/BF03218832
|
[56] |
Zhou W, Yoshino M, Kita H, et al. Preparation and gas permeation properties of carbon molecular sieve membranes based on sulfonated phenolic resin[J]. Journal of Membrane Science,2003,217(1-2):55-67. doi: 10.1016/S0376-7388(03)00074-7
|
[57] |
Zhou W, Yoshino M, Kita H, et al. Carbon molecular sieve membranes derived from phenolic resin with a pendant sulfonic acid group[J]. Industrial & Engineering Chemistry Research,2001,40:4801-4807.
|
[58] |
Llosa Tanco M A, Pacheco Tanaka D A, Rodrigues S C, et al. Composite-alumina-carbon molecular sieve membranes prepared from novolac resin and boehmite. Part I: Preparation, characterization and gas permeation studies[J]. International Journal of Hydrogen Energy,2015,40(16):5653-5663. doi: 10.1016/j.ijhydene.2015.02.112
|
[59] |
Teixeira M, Rodrigues S C, Campo M, et al. Boehmite-phenolic resin carbon molecular sieve membranes—Permeation and adsorption studies[J]. Chemical Engineering Research & Design,2014,92(11):2668-2680.
|
[60] |
Teixeira M, Campo M C, Pacheco Tanaka D A, et al. Composite phenolic resin-based carbon molecular sieve membranes for gas separation[J]. Carbon,2011,49(13):4348-4358. doi: 10.1016/j.carbon.2011.06.012
|
[61] |
Teixeira M, Campo M, Tanaka D A, et al. Carbon–Al2O3–Ag composite molecular sieve membranes for gas separation[J]. Chemical Engineering Research & Design,2012,90(12):2338-2345.
|
[62] |
Zeng C, Zhang L, Cheng X, et al. Preparation and gas permeation of nano-sized zeolite NaA-filled carbon membranes[J]. Separation and Purification Technology,2008,63(3):628-633. doi: 10.1016/j.seppur.2008.07.009
|
[63] |
Zhou Z H, Yang J H, Chang L F, et al. Novel preparation of NaA/carbon nanocomposite thin films with high permeance for CO2/CH4 separation[J]. Chinese Chemical Letters,2007,18(4):455-457. doi: 10.1016/j.cclet.2007.01.039
|
[64] |
Lee P S, Kim D, Nam S E, et al. Carbon molecular sieve membranes on porous composite tubular supports for high performance gas separations[J]. Microporous and Mesoporous Materials,2016,224:332-338. doi: 10.1016/j.micromeso.2015.12.054
|
[65] |
Carretero J, Benito J, Guerreroruiz A, et al. Infiltrated glassy carbon membranes in γ-Al2O3 supports[J]. Journal of Membrane Science,2006,281(1-2):500-507. doi: 10.1016/j.memsci.2006.04.020
|
[66] |
Liu B S, Guo Y H, Yuan F. Novel modification of a macroporous stainless steel tube by electroless Ni plating for use as a substrate for preparation of nanoporous carbon membranes[J]. Industrial & Engineering Chemistry Research,2012,51(26):9007-9015.
|
[67] |
Mariwalat R K, Foley H C. Evolution of ultramicroporous adsorptive structure in poly(furfury1 alcohol) -derived carbogenic molecular sieves[J]. Industrial & Engineering Chemistry Research,1994,33:607-615.
|
[68] |
Sedigh M G, Onstot W J, Xu L, et al. Experiments and simulation of transport and separation of gas mixtures in carbon molecular sieve membranes[J]. The Journal of Physical Chemistry A,1998,102:8580-8589. doi: 10.1021/jp982075j
|
[69] |
Acharya M, Raich B A, Foley H C. Metal-supported carbogenic molecular sieve membranes: Synthesis and applications[J]. Industrial & Engineering Chemistry Research,1997,36:2924-2930.
|
[70] |
Acharya M, Foley H C. Spray-coating of nanoporous carbon membranes for air separation[J]. Journal of Membrane Science,1999,161:1-5. doi: 10.1016/S0376-7388(99)00173-8
|
[71] |
Strano M S, Foley H C. Synthesis and characterization of catalytic nanoporous carbon membranes[J]. AIChE Journal,2001,47(1):66-78. doi: 10.1002/aic.690470110
|
[72] |
Shiflett M B, Foley H C. On the preparation of supported nanoporous carbon membranes[J]. Journal of Membrane Science,2000,179:275-282. doi: 10.1016/S0376-7388(00)00513-5
|
[73] |
Shiflett M B, Foley H C. Ultrasonic deposition of high-selectivity nanoporous carbon membranes[J]. Science,1999,285:1902-1905. doi: 10.1126/science.285.5435.1902
|
[74] |
Wang H, Zhang L, Gavalas G R. Preparation of supported carbon membranes from furfuryl alcohol by vapor deposition polymerization[J]. Journal of Membrane Science,2000,177:25-31. doi: 10.1016/S0376-7388(00)00444-0
|
[75] |
Hou J, Zhang H, Hu Y, et al. Carbon nanotube networks as nanoscaffolds for fabricating ultrathin carbon molecular sieve membranes[J]. ACS Applied Materials & Interfaces,2018,10(23):20182-20188.
|
[76] |
Song C, Wang T, Jiang H, et al. Gas separation performance of C/CMS membranes derived from poly(furfuryl alcohol) (PFA) with different chemical structure[J]. Journal of Membrane Science,2010,361(1-2):22-27. doi: 10.1016/j.memsci.2010.06.018
|
[77] |
Wang C, Ling L, Huang Y, et al. Decoration of porous ceramic substrate with pencil for enhanced gas separation performance of carbon membrane[J]. Carbon,2015,84:151-159. doi: 10.1016/j.carbon.2014.12.003
|
[78] |
Yin X, Wang J, Chu N, et al. Zeolite L/carbon nanocomposite membranes on the porous alumina tubes and their gas separation properties[J]. Journal of Membrane Science,2010,348(1-2):181-189. doi: 10.1016/j.memsci.2009.10.055
|
[79] |
Rajagopalan R, Merritt A, Tseytlin A, et al. Modification of macroporous stainless steel supports with silica nanoparticles for size selective carbon membranes with improved flux[J]. Carbon,2006,44(10):2051-2058. doi: 10.1016/j.carbon.2006.01.009
|
[80] |
Song C, Wang T, Wang X, et al. Preparation and gas separation properties of poly(furfuryl alcohol)-based C/CMS composite membranes[J]. Separation and Purification Technology,2008,58(3):412-418. doi: 10.1016/j.seppur.2007.05.019
|
[81] |
Song C, Wang T, Qiu J. Preparation of C/CMS composite membranes derived from Poly(furfuryl alcohol) polymerized by iodine catalyst[J]. Desalination,2009,249(2):486-489. doi: 10.1016/j.desal.2009.04.006
|
[82] |
Yin X, Chu N, Yang J, et al. Thin zeolite T/carbon composite membranes supported on the porous alumina tubes for CO2 separation[J]. International Journal of Greenhouse Gas Control,2013,15:55-64. doi: 10.1016/j.ijggc.2013.01.032
|
[83] |
Anderson C J, Pas S J, Arora G, et al. Effect of pyrolysis temperature and operating temperature on the performance of nanoporous carbon membranes[J]. Journal of Membrane Science,2008,322(1):19-27. doi: 10.1016/j.memsci.2008.04.064
|
[84] |
Wang C, Hu X, Yu J, et al. Intermediate gel coating on macroporous Al2O3 substrate for fabrication of thin carbon membranes[J]. Ceramics International,2014,40(7):10367-10373. doi: 10.1016/j.ceramint.2014.03.010
|
[85] |
Zhang L, Chen X, Zeng C, et al. Preparation and gas separation of nano-sized nickel particle-filled carbon membranes[J]. Journal of Membrane Science,2006,281(1-2):429-434. doi: 10.1016/j.memsci.2006.04.011
|
[86] |
Lie J A, Hägg M B. Carbon membranes from cellulose and metal loaded cellulose[J]. Carbon,2005,43(12):2600-2607. doi: 10.1016/j.carbon.2005.05.018
|
[87] |
Lei L, Lindbråthen A, Hillestad M, et al. Carbon molecular sieve membranes for hydrogen purification from a steam methane reforming process[J]. Journal of Membrane Science,2021,627:119241. doi: 10.1016/j.memsci.2021.119241
|
[88] |
Lei L, Lindbråthen A, Zhang X, et al. Preparation of carbon molecular sieve membranes with remarkable CO2/CH4 selectivity for high-pressure natural gas sweetening[J]. Journal of Membrane Science,2020,614:118529. doi: 10.1016/j.memsci.2020.118529
|
[89] |
Rodrigues S C, Andrade M, Moffat J, et al. Preparation of carbon molecular sieve membranes from an optimized ionic liquid-regenerated cellulose precursor[J]. Journal of Membrane Science,2019,572:390-400. doi: 10.1016/j.memsci.2018.11.027
|
[90] |
Yoda S, Hasegawa A, Suda H, et al. Preparation of a platinum and palladium/polyimide nanocomposite film as a precursor of metal-doped carbon molecular sieve membrane via supercritical impregnation[J]. Chemistry of Materials,2004,16:2363-2368. doi: 10.1021/cm0349250
|
[91] |
Barsema J N, Balster J, Jordan V, et al. Functionalized carbon molecular sieve membranes containing Ag-nanoclusters[J]. Journal of Membrane Science,2003,219(1-2):47-57. doi: 10.1016/S0376-7388(03)00176-5
|
[92] |
Turner M B, Spear S K, Holbrey J D, et al. Production of bioactive cellulose films reconstituted from ionic liquids[J]. Biomacromolecules,2004,5:1379-1384. doi: 10.1021/bm049748q
|
[93] |
Song J, Ge H, Xu M, et al. Study on the interaction between urea and cellulose by combining solid-state 13C CP/MAS NMR and extended Hückel charges[J]. Cellulose,2014,21(6):4019-4027. doi: 10.1007/s10570-014-0461-6
|
[94] |
Lei L, Pan F, Lindbrathen A, et al. Carbon hollow fiber membranes for a molecular sieve with precise-cutoff ultramicropores for superior hydrogen separation[J]. Nature Communications,2021,12(1):268. doi: 10.1038/s41467-020-20628-9
|
[95] |
Lei L, Lindbråthen A, Hillestad M, et al. Screening cellulose spinning parameters for fabrication of novel carbon hollow fiber membranes for gas separation[J]. Industrial & Engineering Chemistry Research,2019,58(29):13330-13339.
|
[96] |
Karousos D S, Lei L, Lindbråthen A, et al. Cellulose-based carbon hollow fiber membranes for high-pressure mixed gas separations of CO2/CH4 and CO2/N2[J]. Separation and Purification Technology,2020,253:117473. doi: 10.1016/j.seppur.2020.117473
|
[97] |
Haider S, Lindbråthen A, Lie J A, et al. Carbon membranes for oxygen enriched air – Part I: Synthesis, performance and preventive regeneration[J]. Separation and Purification Technology,2018,204:290-297. doi: 10.1016/j.seppur.2018.05.014
|
[98] |
Itta A K, Tseng H H. Hydrogen separation performance of CMS membranes derived from the imide-functional group of two similar types of precursors[J]. International Journal of Hydrogen Energy,2011,36(14):8645-8657. doi: 10.1016/j.ijhydene.2011.03.146
|
[99] |
Tseng H H, Shih K, Shiu P T, et al. Influence of support structure on the permeation behavior of polyetherimide-derived carbon molecular sieve composite membrane[J]. Journal of Membrane Science,2012,405-406:250-260. doi: 10.1016/j.memsci.2012.03.014
|
[100] |
Tseng H H, Wang C T, Zhuang G L, et al. Enhanced H2/CH4 and H2/CO2 separation by carbon molecular sieve membrane coated on titania modified alumina support: Effects of TiO2 intermediate layer preparation variables on interfacial adhesion[J]. Journal of Membrane Science,2016,510:391-404. doi: 10.1016/j.memsci.2016.02.036
|
[101] |
Wey M Y, Wang C T, Lin Y T, et al. Interfacial interaction between CMS layer and substrate: Critical factors affecting membrane microstructure and H2 and CO2 separation performance from CH4[J]. Journal of Membrane Science,2019,580:49-61. doi: 10.1016/j.memsci.2019.02.070
|
[102] |
Setnickova K, Huang T C, Wang C T, et al. Realizing the impact of the intermediate layer structure on the CO2/CH4 separation performance of carbon molecular sieving membranes: Insights from experimental synthesis and molecular simulation[J]. Separation and Purification Technology,2021,269:118627. doi: 10.1016/j.seppur.2021.118627
|
[103] |
Rao P S, Wey M Y, Tseng H H, et al. A comparison of carbon/nanotube molecular sieve membranes with polymer blend carbon molecular sieve membranes for the gas permeation application[J]. Microporous and Mesoporous Materials,2008,113(1-3):499-510.
|
[104] |
Salleh W N W, Ismail A F. Carbon hollow fiber membranes derived from PEI/PVP for gas separation[J]. Separation and Purification Technology,2011,80(3):541-548. doi: 10.1016/j.seppur.2011.06.009
|
[105] |
Tseng H H, Itta A K. Modification of carbon molecular sieve membrane structure by self-assisted deposition carbon segment for gas separation[J]. Journal of Membrane Science,2012,389:223-233. doi: 10.1016/j.memsci.2011.10.031
|
[106] |
Zhang B, Wu Y, Lu Y, et al. Preparation and characterization of carbon and carbon/zeolite membranes from ODPA–ODA type polyetherimide[J]. Journal of Membrane Science,2015,474:114-121. doi: 10.1016/j.memsci.2014.09.054
|
[107] |
Haider S, Lindbråthen A, Lie J A, et al. Regenerated cellulose based carbon membranes for CO2 separation: Durability and aging under miscellaneous environments[J]. Journal of Industrial and Engineering Chemistry,2019,70:363-371. doi: 10.1016/j.jiec.2018.10.037
|
[108] |
Sedigh M G, Jahangiri M, Liu P K T, et al. Structural characterization of polyetherimide based carbon molecular sieve membranes[J]. AIChE Journal,2000,46(11):2245-2255. doi: 10.1002/aic.690461116
|
[109] |
Sedigh M G, Xu L, Tsotsis T T, et al. Transport and morphological characteristics of polyetherimide-based carbon molecular sieve membranes[J]. Industrial & Engineering Chemistry Research,1999,38:3367-3380.
|
[110] |
Fuertes A B, Centeno T A. Preparation of supported asymmetric carbon molecular sieve membranes[J]. Journal of Membrane Science,1999,144:105-111.
|
[111] |
Fuertes A B, Centeno T A. Carbon molecular sieve membranes from polyetherimide[J]. Microporous Mesoporous Mater,1998,26:23-26. doi: 10.1016/S1387-1811(98)00204-2
|
[112] |
Wey M Y, Tseng H H, Chiang C K. Improving the mechanical strength and gas separation performance of CMS membranes by simply sintering treatment of α-Al2O3 support[J]. Journal of Membrane Science,2014,453:603-613. doi: 10.1016/j.memsci.2013.11.039
|
[113] |
Wey M Y, Tseng H H, Chiang C K. Effect of MFI zeolite intermediate layers on gas separation performance of carbon molecular sieve (CMS) membranes[J]. Journal of Membrane Science,2013,446:220-229. doi: 10.1016/j.memsci.2013.06.051
|
[114] |
Tseng H H, Shiu P T, Lin Y S. Effect of mesoporous silica modification on the structure of hybrid carbon membrane for hydrogen separation[J]. International Journal of Hydrogen Energy,2011,36(23):15352-15363. doi: 10.1016/j.ijhydene.2011.08.060
|
[115] |
Itta A K, Tseng H H, Wey M Y. Effect of dry/wet-phase inversion method on fabricating polyetherimide-derived CMS membrane for H2/N2 separation[J]. International Journal of Hydrogen Energy,2010,35(4):1650-1658. doi: 10.1016/j.ijhydene.2009.12.069
|
[116] |
Li K, Zhu Z, Dong H, et al. Bottom up approach to study the gas separation properties of PIM-PIs and its derived CMSMs by isomer monomers[J]. Journal of Membrane Science,2021,635:119519. doi: 10.1016/j.memsci.2021.119519
|
[117] |
Ma Y, Jue M L, Zhang F, et al. Creation of well-defined "mid-sized" micropores in carbon molecular sieve membranes[J]. Angewandte Chemie-International Edition,2019,58(38):13259-13265. doi: 10.1002/anie.201903105
|
[118] |
Cosey W K, Balkus K J, Ferraris J P, et al. Reduced aging in carbon molecular sieve membranes derived from PIM-1 and MOP-18[J]. Industrial & Engineering Chemistry Research,2021,60(27):9962-9970.
|
[119] |
Hazazi K, Ma X, Wang Y, et al. Ultra-selective carbon molecular sieve membranes for natural gas separations based on a carbon-rich intrinsically microporous polyimide precursor[J]. Journal of Membrane Science,2019,585:1-9. doi: 10.1016/j.memsci.2019.05.020
|
[120] |
Salleh W N W, Ismail A F. Fabrication and characterization of PEI/PVP-based carbon hollow fiber membranes for CO2/CH4 and CO2/N2 separation[J]. AIChE Journal,2012,58(10):3167-3175. doi: 10.1002/aic.13711
|
[121] |
Salleh W N W, Ismail A F. Effects of carbonization heating rate on CO2 separation of derived carbon membranes[J]. Separation and Purification Technology,2012,88:174-183. doi: 10.1016/j.seppur.2011.12.019
|
[122] |
Tseng H H, Zhuang G L, Lin M D, et al. The influence of matrix structure and thermal annealing-hydrophobic layer on the performance and durability of carbon molecular sieving membrane during physical aging[J]. Journal of Membrane Science,2015,495:294-304. doi: 10.1016/j.memsci.2015.08.009
|
[123] |
Ma X, Swaidan R, Teng B, et al. Carbon molecular sieve gas separation membranes based on an intrinsically microporous polyimide precursor[J]. Carbon,2013,62:88-96. doi: 10.1016/j.carbon.2013.05.057
|
[124] |
Swaidan R, Ma X, Litwiller E, et al. High pressure pure- and mixed-gas separation of CO2/CH4 by thermally-rearranged and carbon molecular sieve membranes derived from a polyimide of intrinsic microporosity[J]. Journal of Membrane Science,2013,447:387-394. doi: 10.1016/j.memsci.2013.07.057
|
[125] |
Salinas O, Ma X, Wang Y, et al. Carbon molecular sieve membrane from a microporous spirobisindane-based polyimide precursor with enhanced ethylene/ethane mixed-gas selectivity[J]. RSC Advances,2017,7(6):3265-3272. doi: 10.1039/C6RA24699K
|
[126] |
Liao K S, Japip S, Lai J Y, et al. Boron-embedded hydrolyzed PIM-1 carbon membranes for synergistic ethylene/ethane purification[J]. Journal of Membrane Science,2017,534:92-99. doi: 10.1016/j.memsci.2017.04.017
|
[127] |
Salinas O, Ma X, Litwiller E, et al. Ethylene/ethane permeation, diffusion and gas sorption properties of carbon molecular sieve membranes derived from the prototype ladder polymer of intrinsic microporosity (PIM-1)[J]. Journal of Membrane Science,2016,504:133-140. doi: 10.1016/j.memsci.2015.12.052
|
[128] |
Ogieglo W, Puspasari T, Hota M K, et al. Nanohybrid thin-film composite carbon molecular sieve membranes[J]. Materials Today Nano,2020,9:100065. doi: 10.1016/j.mtnano.2019.100065
|
[129] |
Salinas O, Ma X, Litwiller E, et al. High-performance carbon molecular sieve membranes for ethylene/ethane separation derived from an intrinsically microporous polyimide[J]. Journal of Membrane Science,2016,500:115-123. doi: 10.1016/j.memsci.2015.11.013
|
[130] |
Swaidan R J, Ma X, Pinnau I. Spirobisindane-based polyimide as efficient precursor of thermally-rearranged and carbon molecular sieve membranes for enhanced propylene/propane separation[J]. Journal of Membrane Science,2016,520:983-989. doi: 10.1016/j.memsci.2016.08.057
|
[131] |
Ma Y, Zhang F, Yang S, et al. Evidence for entropic diffusion selection of xylene isomers in carbon molecular sieve membranes[J]. Journal of Membrane Science,2018,564:404-414. doi: 10.1016/j.memsci.2018.07.040
|
[132] |
Rao M B, Sircar S. Nanoporous carbon membranes for separation of gas mixtures by selective surface flow[J]. Journal of Membrane Science,1993,85(3):253-264. doi: 10.1016/0376-7388(93)85279-6
|
[133] |
Thaeron C, Parrillo D J, Sircar S, et al. Separation of hydrogen sulfide–methane mixtures by selective surface flow membrane[J]. Separation and Purification Technology,1999,15:121-129. doi: 10.1016/S1383-5866(98)00089-6
|
[134] |
Paranjape M, Clarke P F, Pruden B B, et al. Separation of bulk carbon dioxide-hydrogen mixtures by selective surface flow membrane[J]. Adsorption,1998,4:355-360. doi: 10.1023/A:1008802320863
|
[135] |
Parrillo D J, Thaeron C, Sircar S. Separation of bulk hydrogen sulfide-hydrogen mixtures by selective surface flow membrane[J]. AIChE Journal,1997,43(9):2239-2245. doi: 10.1002/aic.690430910
|
[136] |
Rao M B, Sircar S. Performance and pore characterization of nanoporous carbon membranes for gas separationv[J]. Journal of Membrane Science,1996,110:109-118. doi: 10.1016/0376-7388(95)00241-3
|
[137] |
Liu J, Goss J, Calverley T, et al. Carbon molecular sieve fiber with 3.4–4.9 Angstrom effective micropores for propylene/propane and other gas separations[J]. Microporous Mesoporous Materials,2020,305:110341. doi: 10.1016/j.micromeso.2020.110341
|
[138] |
Liu J, Calverley E M, McAdon M H, et al. New carbon molecular sieves for propylene/propane separation with high working capacity and separation factor[J]. Carbon,2017,123:273-282. doi: 10.1016/j.carbon.2017.07.068
|
[139] |
Centeno T A, Fuertes A B. Carbon molecular sieve gas separation membranes based on poly(vinylidene chloride-co-vinyl chloride)[J]. Carbon,2000,38:1067-1073. doi: 10.1016/S0008-6223(99)00214-6
|
[140] |
Joseph R M, Merrick M M, Liu R, et al. Synthesis and characterization of polybenzimidazole membranes for gas separation with improved gas permeability: A grafting and blending approach[J]. Journal of Membrane Science,2018,564:587-597. doi: 10.1016/j.memsci.2018.07.064
|
[141] |
Berchtold K A, Singh R P, Young J S, et al. Polybenzimidazole composite membranes for high temperature synthesis gas separations[J]. Journal of Membrane Science,2012,415-416:265-270. doi: 10.1016/j.memsci.2012.05.005
|
[142] |
Zhu L, Swihart M T, Lin H. Unprecedented size-sieving ability in polybenzimidazole doped with polyprotic acids for membrane H2/CO2 separation[J]. Energy & Environmental Science,2018,11(1):94-100.
|
[143] |
Zhu L, Swihart M T, Lin H. Tightening polybenzimidazole (PBI) nanostructure via chemical cross-linking for membrane H2/CO2 separation[J]. Journal of Materials Chemistry A,2017,5(37):19914-19923. doi: 10.1039/C7TA03874G
|
[144] |
Omidvar M, Nguyen H, Liang H, et al. Unexpectedly strong size-sieving ability in carbonized polybenzimidazole for membrane H2/CO2 separation[J]. ACS Applied Materials & Interfaces,2019,11(50):47365-47372.
|
[145] |
Pérez-Francisco J M, Santiago-García J L, Loría-Bastarrachea M I, et al. CMS membranes from PBI/PI blends: Temperature effect on gas transport and separation performance[J]. Journal of Membrane Science,2020,597:117703. doi: 10.1016/j.memsci.2019.117703
|
[146] |
Pirouzfar V, Moghaddam A Z, Omidkhah M R, et al. Investigating the effect of dianhydride type and pyrolysis condition on the gas separation performance of membranes derived from blended polyimides through statistical analysis[J]. Journal of Industrial and Engineering Chemistry,2014,20(3):1061-1070. doi: 10.1016/j.jiec.2013.06.043
|
[147] |
Hosseini S S, Chung T S. Carbon membranes from blends of PBI and polyimides for N2/CH4 and CO2/CH4 separation and hydrogen purification[J]. Journal of Membrane Science,2009,328(1-2):174-185. doi: 10.1016/j.memsci.2008.12.005
|
[148] |
Yang Y, Li H, Chen S, et al. Preparation and characterization of a solid amine adsorbent for capturing CO2 by grafting allylamine onto PAN fiber[J]. Langmuir,2010,26(17):13897-13902. doi: 10.1021/la101281v
|
[149] |
Song C, Wang T, Qiu Y, et al. Effect of carbonization atmosphere on the structure changes of PAN carbon membranes[J]. Journal of Porous Materials,2008,16(2):197-203.
|
[150] |
Hamm J B S, Muniz A R, Pollo L D, et al. Experimental and computational analysis of carbon molecular sieve membrane formation upon polyetherimide pyrolysis[J]. Carbon,2017,119:21-29. doi: 10.1016/j.carbon.2017.04.011
|
[151] |
Pan Y, He L, Wang W, et al. Zigzag pore based molecular simulation on the separation of CO2/CH4 mixture by carbon membrane[J]. The Canadian Journal of Chemical Engineering,2019,97(3):727-733. doi: 10.1002/cjce.23235
|
[152] |
LIB David, AF Ismail. Influence of the thermastabilization process and soak time during pyrolysis process on the polyacrylonitrile carbon membranes for O2/N2 separation[J]. Journal of Membrane Science,2003,213:285-291. doi: 10.1016/S0376-7388(02)00513-6
|
[153] |
Kim D, Kwon Y, Lee J H, et al. Tailoring the Stabilization and pyrolysis processes of carbon molecular sieve membrane derived from polyacrylonitrile for ethylene/ethane separation[J]. Membranes (Basel), 2022, 12(1).
|
[154] |
Zhang B, Wang T, Zhang S, et al. Preparation and characterization of carbon membranes made from poly(phthalazinone ether sulfone ketone)[J]. Carbon,2006,44(13):2764-2769. doi: 10.1016/j.carbon.2006.03.039
|
[155] |
Wang T, Zhang B, Qiu J, et al. Effects of sulfone/ketone in poly(phthalazinone ether sulfone ketone) on the gas permeation of their derived carbon membranes[J]. Journal of Membrane Science,2009,330(1-2):319-325. doi: 10.1016/j.memsci.2009.01.006
|
[156] |
Liu S, Wang T, Liu Q, et al. Gas permeation properties of carbon molecular sieve membranes derived from novel poly(phthalazinone ether sulfone ketone)[J]. Industrial & Engineering Chemistry Research,2008,47:876-880.
|
[157] |
Xu R, He L, Li L, et al. Ultraselective carbon molecular sieve membrane for hydrogen purification[J]. Journal of Energy Chemistry,2020,50:16-24. doi: 10.1016/j.jechem.2020.03.008
|
[158] |
Singh R, Koros W J. Carbon molecular sieve membrane performance tuning by dual temperature secondary oxygen doping (DTSOD)[J]. Journal of Membrane Science,2013,427:472-478. doi: 10.1016/j.memsci.2012.10.004
|
[159] |
Lagorsse S, Magalhães F D, Mendes A. Aging study of carbon molecular sieve membranes[J]. Journal of Membrane Science,2008,310(1-2):494-502. doi: 10.1016/j.memsci.2007.11.025
|
[160] |
Wenz G B, Koros W J. Tuning carbon molecular sieves for natural gas separations: A diamine molecular approach[J]. AIChE Journal,2017,63(2):751-760. doi: 10.1002/aic.15405
|
[161] |
Qiu W, Vaughn J, Liu G, et al. Hyperaging tuning of a carbon molecular-sieve hollow fiber membrane with extraordinary gas-separation performance and stability[J]. Angewandte Chemie - International Edition,2019,58(34):11700-11703. doi: 10.1002/anie.201904913
|
[162] |
Xu L, Rungta M, Hessler J, et al. Physical aging in carbon molecular sieve membranes[J]. Carbon,2014,80:155-166. doi: 10.1016/j.carbon.2014.08.051
|