X Zhang, W Li, A Lu. Designed porous carbon materials for efficient CO2 adsorption and separation[J]. New Carbon Materials, 2015, 30(6):481-501.
|
J Sreńscek-Nazzal, K Kie?basa. Advances in modification of commercial activated carbon for enhancement of CO2 capture[J]. Applied Surface Science, 2019, 494:137-151.
|
G Huang, Y Liu, X Wu, et al. Activated carbons prepared by the KOH activation of a hydrochar from garlic peel and their CO2 adsorption performance[J]. New Carbon Materials, 2019, 34(3):247-257.
|
H Demiral, I Demiral. Preparation and characterization of carbon molecular sieves from chestnut shell by chemical vapor deposition[J]. Advanced Powder Technology, 2018, 29(12):3033-3039.
|
Z Tang, H Zhuo, G Yang, et al. Preparation of nanoporous carbons with hierarchical pore structure for CO2 capture[J]. New Carbon Materials, 2013, 28(1):55-60.
|
X Wu, C Zhang, Z Tian, et al. Large-surface-area carbons derived from lotus stem waste for efficient CO2 capture[J]. New Carbon Materials, 2018, 33(3):252-261.
|
I Majchrzak-Kuc?ba, D Wawrzyńczak, ?ciubid?o, et al. Stability and regenerability of activated carbon used for CO2 removal in pilot DR-VPSA unit in real power plant conditions[J]. Journal of CO2 Utilization, 2019, 29:1-11.
|
H Deng, S Jin, Z Liang, et al. Synthesis of porous carbons derived from metal-organic coordination polymers and their adsorption performance for carbon dioxide[J].New Carbon Materials, 2012, 27(3):194-199.
|
T Song, J Liao, J Xiao, et al. Effect of micropore and mesopores structure on CO2 adsorption by activated carbons from biomass[J]. New Carbon Materials, 2015, 30(2):156-166.
|
L Liu, J Lu, Y Zhang, et al. Synthesis of nitrogen-doped graphitic carbon nanocapsules from a poly (ionic liquid) for CO2 capture[J]. New Carbon Materials, 2017, 32(4):380-384.
|
S K Salestan, M Taghizadeh. The effect of impurity on the separation of CO2 from N2 by MCM-41:A simulation study[J]. Chemical Physics, 2019, 524:124-130.
|
L Chen, X Jiang, J Qiu, et al. Selective CO2 adsorption and H2 storage in two porous amine-pillared graphene oxide frameworks[J]. Journal of Solid State Chemistry, 2019, 279:120980.
|
J McEwen, J D Hayman, A O Yazaydin. A comparative study of CO2, CH4 and N2 adsorption in ZIF-8, Zeolite-13X and BPL activated carbon[J]. Chemical Physics, 2013, 412:72-76.
|
Z Jin, J Wang, R Zhao, et al. Synthesis of S, N co-doped porous carbons from polybenzoxazine for CO2 capture[J]. New Carbon Materials, 2018, 33(5):392-401.
|
N A Rashidi, S Yusup. Potential of palm kernel shell as activated carbon precursors through single stage activation technique for carbon dioxide adsorption[J]. Journal of Cleaner Production, 2017, 168:474-486.
|
U Morali, H Demiral, S Sensoz. Optimization of activated carbon production from sunflower seed extracted meal:Taguchi design of experiment approach and analysis of variance[J]. Journal of Cleaner Production, 2018, 189:602-611.
|
U Morali, H Demiral, S Sensoz. Synthesis of carbon molecular sieve for carbon dioxide adsorption:Chemical vapor deposition combined with Taguchi design of experiment method[J]. Powder Technology, 2019, 355:716-726.
|
Y Yamane, H Tanaka, M T Miyahara. In silico synthesis of carbon molecular sieves for high-performance air separation[J]. Carbon, 2019, 141:626-634.
|
I Krkljus, T Steriotis, G Charalambopoulou, et al. H2/D2 adsorption and desorption studies on carbon molecular sieves with different pore structures[J]. Carbon, 2013, 57:239-247.
|
H R Yu, S Cho, B C Bai, et al. Effects of fluorination on carbon molecular sieves for CH4/CO2 gas separation behavior[J]. International Journal of Greenhouse Gas Control, 2012, 10:278-284.
|
S Cho, H R Yu, T H Choi, et al. Surface functionalization and CO2 uptake on carbon molecular sieves:Experimental observation and theoretical study[J]. Applied Surface Science, 2018, 447:8-14.
|
A Wahby, J Silvestre-Albero, A Sepúlveda-Escribano, et al. CO2 adsorption on carbon molecular sieves[J]. Microporous and Mesoporous Materials, 2012, 164:280-287.
|
E Rodriguez, R Garcia. Low-cost hierarchical micro/macroporous carbon foams as efficient sorbents for CO2 capture[J]. Fuel Processing Technology, 2017, 156:235-245.
|
P Zhang, Y Zhong, J Ding, et al. A new choice of polymer precursor for solvent-free method:Preparation of N-enriched porous carbons for highly selective CO2 capture[J]. Chemical Engineering Journal, 2019, 355:963-973.
|
J Uebbing, L K Rihko-Struckmann, K Sundmacher. Exergetic assessment of CO2 methanation processes for the chemical storage of renewable energies[J]. Applied Energy, 2019, 233-234:271-282.
|
F Qin, Z Guo, J Wang, et al. Nitrogen-doped asphaltene-based porous carbon nanosheet for carbon dioxide capture[J]. Applied Surface Science, 2019, 491:607-615.
|
L Shao, Y Sang, J Huang. Imidazole-based hyper-cross-linked polymers derived porous carbons for CO2 capture[J]. Microporous and Mesoporous Materials, 2019, 275:131-138.
|
Z Tian, J Huang, X Zhang, et al. Ultra-microporous N-doped carbon from polycondensed framework precursor for CO2 adsorption[J]. Microporous and Mesoporous Materials, 2018, 257:19-26.
|
S Zhang, Q Zhou, X Jiang, et al. Preparation and evaluation of nitrogen-tailored hierarchical meso-/micro-porous activated carbon for CO2 adsorption[J]. Environmental Technology, 2019:1-10.
|
M Dizbay-Onat, U K Vaidya, C T Lungu. Preparation of industrial sisal fiber waste derived activated carbon by chemical activation and effects of carbonization parameters on surface characteristics[J]. Industrial Crops and Products, 2017, 95:583-590.
|
D Tiwari, H Bhunia, P K Bajpai. Adsorption of CO2 on KOH activated, N-enriched carbon derived from urea formaldehyde resin:kinetics, isotherm and thermodynamic studies[J]. Applied Surface Science, 2018, 439:760-771.
|