留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

工程应用C/C复合材料的性能分析与展望

苏君明 周绍建 李瑞珍 肖志超 崔红

苏君明, 周绍建, 李瑞珍, 肖志超, 崔红. 工程应用C/C复合材料的性能分析与展望. 新型炭材料, 2015, 30(2): 106-114.
引用本文: 苏君明, 周绍建, 李瑞珍, 肖志超, 崔红. 工程应用C/C复合材料的性能分析与展望. 新型炭材料, 2015, 30(2): 106-114.
SU Jun-ming, ZHOU Shao-jian, LI Rui-zhen, XIAO Zhi-chao, CUI Hong. A review of carbon-carbon composites for engineering applications. New Carbon Mater., 2015, 30(2): 106-114.
Citation: SU Jun-ming, ZHOU Shao-jian, LI Rui-zhen, XIAO Zhi-chao, CUI Hong. A review of carbon-carbon composites for engineering applications. New Carbon Mater., 2015, 30(2): 106-114.

工程应用C/C复合材料的性能分析与展望

基金项目: 国家科技支撑计划(2011BAE03B00).
详细信息
    通讯作者:

    苏君明,教授级高级工程师. E-mail: kangyuanyuan@xacmkj.com

  • 中图分类号: TQ342+.74

A review of carbon-carbon composites for engineering applications

Funds: National Science-technology Support Plan Project (2011BAE03B00).
  • 摘要: 评价了中国40多年来在航天、航空、光伏、粉末冶金、工业高温炉领域成功应用的针刺C/C,正交3D C/C、径编C/C、穿刺C/C、轴编C/C等五类C/C复合材料的物理、力学、热学、烧蚀、摩擦磨损、使用寿命等性能及特点,并与其他国家相应材料性能进行分析对比,为建立工程应用C/C复合材料共享的数据库平台奠定基础。揭示了炭纤维预制体、炭基体类型、界面结合状态与材料性能的关联度。指出炭纤维预制体结构单元精细化研究和其结构的梯度设计,以及炭基体的优化组合匹配技术,仍是C/C复合材料性能稳定化提升的重点研究方向。
  • 苏君明, C/C喉衬材料的研究与发展
    [J]. 炭素科技, 2001, 11(1): 1-6. (SU Jun-ming, The research and development of the carbon-carbon throat materrials
    [J], Carbon Techniques, 2001, 11(1): 1-6.)
    M Montaudon, F Christin, J J Novoltex. Textures for thermostructural material
    [R]. AIAA: 91-1848.
    Russell A Ellis. Testing of novoltex 3D carbon-carbon interal throat and cones(ITECs)
    [R]. AIAA: 88-3361.
    Bernard H Broquere. Carbon/carbon nozzle exit cones sep's experience and new developments
    [R]. AIAA: 97-2674.
    Alain Lacomb, Et al. 3D NovoltexR and NexecoR carbon-carbon nozzle extensions; matured, industrial and available technologies to reduce programmatic and technical risks and to increase performance of launcher upper stage engines
    [R]. AIAA2008-5236.
    M Bussiere, M Prel. Ariane v solid rocket booster nozzle development status
    [R]. AIAA: 94-3063.
    Michel Berboys. Snecma propulsion solide advanced technology SRM nozzles history and future
    [R]. AIAA: 2006-4596.
    Alain Lacomb, Thierry Pichon, Marc Lacoste. High temperature composite nozzle extensions,a mature and efficient technology to improve upper stage liquid rocket engine performance
    [R]. AIAA: 2007-5470.
    李瑞珍, 胡秦妹, 李 晋, 等. C/C镜筒复合材料的性能研究
    [J], 炭素, 2011(2): 19-21. (LI Rui-zhen, HU Qin-mei, LI Jin, et al. Properties of C/C camera cylinder composites
    [J]. Carbon(Chinese), 2011(2): 19-21.)
    M A Maistre. Development of a 4D reinforced Carbon-carbon composite
    [R]. AIAA: 76-607.
    P Lamicq. Recent Improvement in 4D carbon-carbon material
    [R]. AIAA: 77-822.
    Michel Berdoyes. Thrust vector control by injection of hot gas bled from the chamber hot gas value
    [R]. AIAA: 89-2867.
    Canfield A R. Braided carbon/carbon nozzle development
    [R]. AIAA: 85-1096.
    G C Lamere. MX first stage nozzle development
    [C]. AO/A103844.
    李崇俊, 侯锋辉, 门海泉, 等, 日本的炭/炭复合材料研究概述
    [J]. 炭素, 2013(1): 8-14(39). (LI Chong-jun, HOU Feng-hui, MEN Hai-quan, et al. Research and development of carbon-carbon composite in japan
    [J]. Carbon (Chinese), 2013(1): 8-14(39).)
    缪云良. 一种可针刺无纺织物及准三维预制体
    [P]. 中国发明专利, CN1408920A, 2003. 04. 09. (MIAO Yun-liang. A kind of needle no weave fabric and approximate three dimensional preform. China patent, CN1408920A
    [P]. 2003. 04. 09.)
    苏君明, 崔 红, 苏哲安, 等. 轴棒法混编4D炭/炭复合材料喉衬研究
    [J]. 炭素, 2004,(1): 12-16. (SU Jun-ming, CUI Hong, SU Zhe-an, et al. Research of 4D C/C composite material throat insert by mixed weaved with carbon fibre and axial carbon rod
    [J]. Carbon(Chinese), 2004,(1): 12-16.)
    C F Baker, D R Dunn, E R Mills. Low cost, low erosion throat material for solid rocket motors
    [R]. AIAA: 94-3187.
    HOU Xiao, CHENG Wen, CHEN Ni. Preparation of a high performance carbon-carbon composite throat insert woven with axial carbon rods
    [J]. New Carobn Materials, 2013, 28(5): 355-362.
    Fitzer E, Manocha L M. Carbon reinforcements and carbon/carbon composites
    [M]. Vertag: Springer, 1998.
    Bianchi D, Martelli E, Nasuti F. Coupled analysis of flow and surface ablation in carbon-carbon rocket nozzles
    [J]. Materials of Aerospace Propulsion, 2011, 2(4): 13-24.
    苏君明, 邵海成, 肖志超, 等. 低烧蚀率针刺炭纤维炭/炭复合材料喉衬的制备与性能研究
    [J]. 炭素技术, 2013, 32(6): A1-A5. (SU Jun-ming,SHAO Hai-cheng, XIAO Zhi-chao. Preparation and properties of needling carbon-carbon composites throat with low ablation rate
    [J]. Carbon Techniques, 2013, 32(6): A1-A5.)
    周绍建, 苏君明, 苏哲安, 等. 树脂炭含量对C/C复合材料性能的影响
    [J]. 新型炭材料, 2001, 16(1): 49-52. (ZHOU Shao-jian, SU Jun-ming, SU Zhe-an, et al. The influences of glassy carbon content on the properties of C/C composite
    [J]. New Carobn Materials, 2001, 16(1): 49-52.)
    冉红星, 崔 红, 郝志彪, 等. 炭基体结构状态对C/C复合材料抗烧蚀性能的影响
    [J]. 炭素, 2002,(4): 20-25. (RAN Hong-xing, CUI Hong, HAO Zhi-biao, et al. Influence of carbon-matrix structure on antiablative performances of C/C composites
    [J]. Carbon(Chinese), 2002,(4): 20-25.)
    苏君明, 杨 军, 肖志超, 等. C/C复合材料飞机刹车盘的结构与性能
    [J]. 新型炭材料, 2006, 21(1): 81-88. (SU Jun-ming, YANG Jun, XIAO Zhi-chao, et al. Structure and properties of carbon-carbon composite materials for aircraft brake discs
    [J]. New Carobn Materials, 2006, 21(1): 81-88.)
    SU Jun-ming, XIAO Zhi-chao, LIU Yong-qiong. Preparation and characterization of carbon-carbon aircraft brake materials with long service life and good frictional properties
    [J]. New Carobn Materials, 2010, 25(5): 329-334.
    肖志超, 陈青华, 金志浩, 等. 热处理温度对碳纤维增强碳复合材料摩擦学性能的影响
    [J]. 硅酸盐学报, 2008, 36(8)1153-1158. (XIAO Zhi-chao, CHEN Qing-hua, JIN Zhi-hao, et al. Effect of heat treatment tempreture on the tribological properties of carbon fiber reinforced carbon composites
    [J]. Journal of the Chinese Ceramic Society, 2008, 36(8): 1153-1158.)
    苏君明, 肖志超, 刘勇琼, 等. 制动速度与压力对飞机炭刹车盘摩擦磨损性能的影响
    [J]. 粉末冶金材料与工程, 2011, 16(2): 212-217. (SU Jun-ming, XIAO Zhi-chao, LIU Yong-qiong, et al. Effect of braking velocity and pressure on aircraft brake discs' friction and wear properties
    [J]. Materials Science and Engineering of Powder Metallurgy, 2011, 16(2): 212-217.)
    苏君明, 季光明, 李国峰, 等. 影响飞机炭刹车盘使用寿命的因素研究
    [J]. 炭素, 2011,(4): 7-11. (SU Jun-ming, JI Guang-ming, LI Guo-feng, et al. Research on service life of the aircraft carbon brake disks
    [J]. Carbon(Chinese), 2011,(4): 7-11.)
    彭志刚, 李永军, 苏君明, 等. 高纯炭/炭热场材料研究
    [J]. 固体火箭技术, 2007, 30(增刊): 136-138. (PENG Zhi-gang, LI Yong-jun, SU Jun-ming, et al. Study on high purity C/C thermal field composite
    [J]. Journal of Solid Rocket Technology, 2007, 30(supplement): 136-138.)
    苏君明, 李永军, 肖志超, 等. 炭/炭U型加热器的制备与性能
    [J]. 炭素, 2011,(1): 21-24(38). (SU Jun-ming, LI Yong-jun, XIAO Zhi-chao, et al. Preparation and properties of carbon-carbon composite heater with U shape
    [J]. Carbon (Chinese), 2011,(1): 21-24(38).)
    李贺军, 曾燮榕, 李克智, 等. 炭/炭复合材料研究应用现状及思考
    [J]. 炭素技术, 2001(5): 24-27. (LI He-jun, ZENG Xie-rong, LI Ke-zhi, et al. Some considerations in the R&D of carbon-carbon composites
    [J]. Carbon Techniques, 2001(5): 24-27.)
    刘海平, 田广来, 张立同, 等. "三明治"C/C复合材料及其摩擦磨损性能
    [J]. 炭素技术, 2012, 31(3): A19-A22. (LIU Hai-ping, TIAN Guang-lai, ZHANG Li-tong, et al. Carbon-carbon composites with sandwich structure and their friction wear properties
    [J]. Carbon Techniques, 2012, 31(3): A19-A22.)
    梅 辉, 陈 曦, 邓晓东, 等. 三维针刺C/SiC密度梯度板的无损检测与评价
    [J]. 复合材料学报, 2010, 27(6): 106-112. (MEI Hui, CHEN Xi, DENG Xiao-dong, et al. Non-destructive testing and evaluation of 3D needled C/SiC plate with density gradient
    [J]. Acta Materiae Composiae Sinica, 2010, 27(6): 106-112.)
  • 加载中
计量
  • 文章访问数:  1806
  • HTML全文浏览量:  608
  • PDF下载量:  1331
  • 被引次数: 0
出版历程
  • 收稿日期:  2014-11-10
  • 录用日期:  2015-05-04
  • 修回日期:  2015-02-01
  • 刊出日期:  2015-04-28

目录

    /

    返回文章
    返回