Microstructures and mechanical properties of pyrocarbons produced from phenolic resin with added Ni(NO3)2
-
摘要: 在酚醛树脂中添加Ni（NO3）2，逐步固化、高温炭化后，用X射线衍射、扫描电镜和透射电镜观察表征树脂高温炭化显微结构，并测试树脂炭的抗折强度、弹性模量和断裂能来分析其力学性能。显微结构观察表明：添加质量分数5%的Ni（NO3）2会在酚醛树脂炭化结构中生成体积分数约2%的纳米炭纤维，纳米炭纤维交错排布；由于酚醛树脂热解产生的含碳小分子气体成分复杂，在树脂玻璃炭出现了炭纳米纤维与碳纳米管接替生长的现象。力学性能测试结果表明：树脂玻璃炭中原位生成的纳米炭纤维与树脂炭基体有一定的结合强度，能提高树脂玻璃炭的抗折强度、弹性模量；可显著提高树脂炭的断裂能，增强其抗拉强度和断裂韧性。Abstract: A refractory containing graphite is commonly used in the metallurgical industry in locations subject to severe thermal shock because of the high thermal conductivity and good thermal shock resistance of graphite. However, a refractory that uses phenolic resin as the carbon precursor is brittle, and to improve its strength and toughness, Ni(NO3)2 is added to the resin to catalyze the in-situ formation of carbon nanofibers/nanotubes. The microstructure and mechanical properties of the Ni(NO3)2-modified phenolic resin carbons were characterized by XRD, SEM, TEM and mechanical tests. Results indicate that carbon nanofibers/nanotubes (2% by volume) were formed within the pyrocarbons as a result of the nickel catalyst and these are interconnected to form a network structure. The nanocarbon fibers/tubes significantly improve the bend strength, elastic modulus, tensile strength and fracture toughness of the pyrocarbons and their fracture energies are increased accordingly.
-
Key words:
- Phenolic resin /
- Ni(NO3)2 /
- Carbonized structure /
- Mechanical properties
-
Zheng Kai-hong, Gao Ji-qiang, et al. Chopped carbon fiber reinforced glass-ceramic matrix composites[J]. Bulletin of the Chinese Ceramic Society, 1997(5): 25-28. Gu He-pin, Jiang Ying, Zhang Jing, et al. Study on mechanical properties of epoxy resin reinforced short fiber[J]. China Plastics Industry, 2007, 35(12): 20-27. Guellali M, Oberacker R, Hoffmann M J.Influence of the matrix microstructure on the mechanical properties of CVI-infiltrated car-bon fiber felts[J].Carbon, 2005, 4(9): 1954-1960. He Y G, Li K Z, Li H J, et al.Effect of interface structures on the fracture behavior of two-dimensional carbon /carbon composites by isothermal chemical vapor infiltration[J].Journal of Materials Science, 2010, 4(6): 1432-1437. Zhou G, Liu Y, He L, et al.Microstructure difference between core and skin of T700 carbon fibers in heat-treated carbon /carbon composites[J].Carbon, 2011, 49(9): 2883-2892. Li Wei, Li He-jun, Wei Jian-feng, et al. Effect of heat treatment of carbon fibers on the mechanical properties of C/C composites[J]. Materials China, 2013, 32(5): 314-317. Wang Ling-sen. The microstructure and heat-explosed interface characterstics of SiC fiber reinforced 7740 borosilicate glass and LAS glass-ceramics[J]. Journal of the Chinese Ceramic Society, 1989, 17(5): 393-400. Mu Zhao, Huaihe Song, Xiaohong Chen, et al. Large-scale synthesis of onion-like carbon nanoparticles by carbonization of phenolic resin[J]. Acta Materialia, 2007, 55(18): 6144-6150. Hu Qing-hua, Wang Xi-Tang, Wang Zhou-fu, et al. Preparation of low-dimension carbon nanostructures via in-situ catalytic pyrolysis of phenolic resin[J]. Chinese Journal of Materials Research, 2012, 26(3): 302-308. Kasahara N, Shiraishi S, Oya A. Heterogeneous graphitization of thin carbon fiber derived from phenol formaldehyde resin[J]. Carbon, 2003, 41(8): 1654-1658. Wang Jun-lin, Huang Ke-xin, Sun Guo-en, et al. Studies on the formation of glassy carbon structure[J]. Journal of Northeast Normal University, 1998(4): 54-57. Zhang Zhe-li, Rik Brydson, Aidan Westwood, et al. The structure of a glass-like carbon characterized by electron energy loss spectroscopy[J]. Rare Metal Materials and Engineering, 2007, 36(Suppl.2): 757-759. Wang Jun-lin, Wang Qun, Yang Hai-bin, et al. Raman spectra studies during the producing of glassy carbon[J]. Journal of Functional Materials, 1998(Suppl): 1249-1250. Deng Xiao-yan, Zhang Zhi-kun. Mechanism and non-isothermal kinetics of thermal decomposition of Ni(NO3)2·6H2O[J]. Journal of Qing dao University of Science and Technology, 2006, 27(1): 24-27. Kenneth B K, Charanjeet Singh, Manish Chhowalla, et al. Catalytic synthesis of carbon nanotubes and nanofibers[J]. Encyclopedia Nanoscience and Nanotechnology, 2004, (1): 665-686. -
下载:
点击查看大图
图(1)
计量
- 文章访问数: 434
- HTML全文浏览量: 61
- PDF下载量: 620
- 被引次数: 0
