高比表面积聚丙烯腈基炭微球的制备与正交实验分析

刘沅明; 秦显营; 张少琼; 张哲旭; 康飞宇; 李宝华

doi:10.1016/S1872-5805(20)60480-2

高比表面积聚丙烯腈基炭微球的制备与正交实验分析

doi: 10.1016/S1872-5805(20)60480-2

刘沅明^1,2,
秦显营¹,
张少琼^1,2,
张哲旭¹,
康飞宇^1,2,3,
李宝华^1,3,

1.
清华大学深圳国际研究生院下一代动力与储能电池工程实验室, 炭功能材料工程实验室, 广东深圳 518055;
2.
清华大学材料学院, 先进材料教育部重点实验室, 北京 100084;
3.
深圳盖姆石墨烯中心, 广东深圳 518055

基金项目: 国家重点基础研究发展计划（2014CB932400）；国家自然基金联合基金（U1401243）；国家自然科学基金（51232005）；深圳科技计划（JCYJ20150529164918735，KQJSCX20160226191136，JCYJ20170412170911187）；广东省科技计划（2015TX01N011）.

详细信息

作者简介:
刘沅明,硕士研究生.E-mail:liu-ym16@mails.tsinghua.edu.cn

通讯作者:
李宝华,教授.E-mail:libh@mail.sz.tsinghua.edu.cn

中图分类号: TQ127.1⁺1
计量
- 文章访问数: 413
- HTML全文浏览量: 150
- PDF下载量: 141
- 被引次数: 0
出版历程
- 收稿日期: 2020-01-06
- 录用日期: 2020-04-28
- 修回日期: 2020-03-26
- 刊出日期: 2020-04-28

Optimization of the preparation conditions of KOH-activated, PAN-based carbon ellipsoids by orthogonal experimental analysis

1.
Engineering Laboratory for Next Generation Power and Energy Storage Batteries, Engineering Laboratory for Functionalized Carbon Materials, Shenzhen International Graduate School, Tsinghua University, Shenzhen 518055, China;
2.
School of Materials Science and Engineering, Tsinghua University, Beijing 100084, China;
3.
Shenzhen Geim Graphene Center, Shenzhen 518055, China

Funds: National Key Basic Research Program of China (2014CB932400); Joint Fund of the National Natural Science Foundation of China (U1401243); National Natural Science Foundation of China (51232005); Shenzhen Technical Plan Project (JCYJ20150529164918735, KQJSCX20160226191136, JCYJ20170412170911187); Guangdong Technical Plan Project (2015TX01N011).

摘要

摘要: 本研究优化了制备高比表面积聚丙烯腈基多孔炭微球的KOH化学活化工艺，并系统讨论了活化条件对炭微球的孔体积和平均孔径的影响。活化条件的优化原理基于9个正交实验，主要讨论了活化温度、恒温时间以及碱碳质量比3个因素对比表面积的影响与显著性。极差分析和方差分析表明，3个因素对比表面积均具有高度显著的影响，且三者的影响程度有如下关系：活化温度 > 恒温时间 > 碱碳比。最佳活化工艺为：活化温度800 ℃，恒温时间4 h，碱碳比4：1。由最佳活化工艺制备的聚丙烯腈基多孔炭微球的比表面积可由活化前的463 m²g^-1显著提高至2 517 m²g^-1。
- 多孔炭 /
- KOH活化 /
- 比表面积 /
- 正交实验
Abstract: The optimal preparation conditions for activated carbons from polyacrolynitrile ellipsoid powder by KOH activation were investigated by orthogonal experimental analysis. Results indicate that the activation temperature, holding time, KOH/carbon mass ratio all have a significant impact on the specific surface area, but a small impact on the total pore volume and mean pore size. The importance of factors determining (a) specific surface area are activation temperature > activation time > KOH/carbon mass ratio, (b) total pore volume are activation temperature > KOH/carbon mass ratio > activation time, and (c) the mean pore size are activation time > KOH/carbon mass ratio > activation temperature. The optimal combination of conditions (activation temperature of 800 ℃, holding time of 4 h and KOH/carbon mass ratio of 4:1) from orthogonal experimental analysis was validated experimentally. Under these conditions the specific surface area, total pore volume and mean pore size of the PAN-based porous carbon reached 2 517 m² g^-1, 1.07 cm³ g^-1 and 1.70 nm, respectively.
- Porous carbon /
- KOH activation /
- Specific surface area /
- Orthogonal experiment

HTML全文

下载: 全尺寸图片幻灯片

参考文献(20)

Wang J, Kaskel S. KOH activation of carbon-based materials for energy storage[J]. Journal of Materials Chemistry, 2012, 22(45):23710.

Wu M, Zha Q, Qiu J, et al. Preparation and characterization of porous carbons from PAN-based preoxidized cloth by KOH activation[J]. Carbon, 2004, 42(1):205-210.

Liu Y, Qin X, Zhang S, et al. Oxygen and nitrogen co-doped porous carbon granules enabling dendrite-free lithium metal anode[J]. Energy Storage Materials, 2019, 18:320-327.

Liu Y, Qin X, Zhang S, et al. Fe₃O₄-decorated porous graphene interlayer for high-performance lithium-sulfur batteries[J]. ACS Applied Materials & Interfaces, 2018, 10(31):26264-26273.

Qie L, Chen W, Xu H, et al. Synthesis of functionalized 3D hierarchical porous carbon for high-performance supercapacitors[J]. Energy & Environmental Science, 2013, 6(8):2497.

Ahmadpour A, Do D D. The preparation of active carbons from coal by chemical and physical activation[J]. Carbon, 1996, 34(4):471-479.

Marsh H, Yan D S, O'Grady T M, et al. Formation of active carbons from cokes using potassium hydroxide[J]. Carbon, 1984, 22(6):603-611.

Yang S, Hu H, Chen G. Preparation of carbon adsorbents with high surface area and a model for calculating surface area[J]. Carbon, 2002, 40(3):277-284.

Laine J, Calafat A. Factors affecting the preparation of activated carbons from coconut shell catalized by potassium[J]. Carbon, 1991, 29(7):949-953.

Zhou M, Pu F, Wang Z, et al. Nitrogen-doped porous carbons through KOH activation with superior performance in supercapacitors[J]. Carbon, 2014, 68:185-194.

Yoon S H, Lim S, Song Y, et al. KOH activation of carbon nanofibers[J]. Carbon, 2004, 42(8-9):1723-1729.

Sevilla M, Fuertes A B, Mokaya R. High density hydrogen storage in superactivated carbons from hydrothermally carbonized renewable organic materials[J]. Energy & Environmental Science, 2011, 4(4):1400.

Ye H, Yin Y X, Xin S, et al. Tuning the porous structure of carbon hosts for loading sulfur toward long lifespan cathode materials for Li-S batteries[J]. Journal of Materials Chemistry A, 2013, 1(22):6602.

Fu L, Tang K, Song K, et al. Nitrogen doped porous carbon fibres as anode materials for sodium ion batteries with excellent rate performance[J]. Nanoscale, 2014, 6(3):1384-1389.

Zhu Y, Hu H, Li W, et al. Resorcinol-formaldehyde based porous carbon as an electrode material for supercapacitors[J]. Carbon, 2007, 45(1):160-165.

Wu X, Leung D Y C. Optimization of biodiesel production from camelina oil using orthogonal experiment[J]. Applied Energy, 2011, 88(11):3615-3624.

Yu M J, Wang C G, Bai Y J, et al. SEM and OM study on the microstructure of oxidative stabilized polyacrylonitrile fibers[J]. Polymer Bulletin, 2007, 58(5):933-940.

Qin X, Lu Y, Xiao H, et al. Improving stabilization degree of stabilized fibers by pretreating polyacrylonitrile precursor fibers in nitrogen[J]. Materials Letters, 2012, 76162-76164.

Qin X, Lu Y, Xiao H, et al. Effect of heating and stretching polyacrylonitrile precursor fibers in steam on the properties of stabilized fibers and carbon fibers[J]. Polymer Engineering & Science, 2012, 53(4):827-832.

Wen Y, Lu Y, Xiao H, et al. Further investigation on boric acid catalytic graphitization of polyacrylonitrile carbon fibers:Mechanism and mechanical properties[J]. Materials & Design (1980-2015), 2012, 36728-36734.

施引文献

资源附件(0)

访问统计