Citation: | TENG Xin, XU Hong-liang, LIU Qi, SHI Li-li, GAI Liang, WANG Lei, YANG Yu-sheng, WU Feng. The influence of conductive additives on the performance of a SiO/C composite anode in lithium-ion batteries. New Carbon Mater., 2017, 32(6): 572-580. doi: 10.1016/S1872-5805(17)60138-0 |
Lee H Y, Lee S M. Carbon-coated nano-Si dispersed oxides/graphite composites as anode material for lithium ion batteries[J]. Electrochemistry Communications, 2004, 6(5):465-469.
|
Miyachi M, Yamamoto H, Kawai H, et al. Analysis of SiO anodes for lithium-ion batteries[J]. Journal of the Electrochemical Society, 2005, 152(10):A2089-A2091.
|
Lee D J, Ryou M H, Lee J N, et al. Nitrogen-doped carbon coating for a high-performance SiO anode in lithium-ion batteries[J]. Electrochemistry Communications, 2013, 34:98-101.
|
Huang K L, Wang Z X, Liu S Q. The Principle and Key Technology of Lithium Ion Battery[M]. Beijing:Chemical Industry Press, 2008.
|
Wu Y P, Ma J Q, Dai X B, et al. Lithium Ion Battery:Application and Practice[M]. Beijing:Chemical Industry Press, 2004.
|
Su X, Wu Q, Li J, et al. Silicon-based nanomaterials for lithium-ion batteries:A review[J]. Advanced Energy Materials, 2014, 4(1).
|
Huang Z, Harris K D, Brett M J. Morphology control of nanotube arrays[J]. Advanced Materials, 2009, 21(29):2983-2987.
|
Li H, Wu XL, Sun H, et al. Dual-Porosity SiO2/C nanocomposite with enhanced lithium storage performance[J]. The Journal of Physical Chemistry C, 2015.
|
Guo B, Shu J, Wang Z, et al. Electrochemical reduction of nano-SiO2 in hard carbon as anode material for lithium ion batteries[J]. Electrochemistry Communications, 2008, 10(12):1876-1878.
|
Ren Y R, Ding J N, Yuan N Y, et al. Preparation and characterization of silicon monoxide/graphite/carbon nanotubes composite as anode for lithium-ion batteries[J]. Journal of Solid State Electrochemistry, 2012, 16(4):1453-1460.
|
Qi C, Ma X, Ning G, Song X, et al. Aqueous slurry of S-doped carbon nanotubes as conductive additive for lithium ion batteries[J]. Carbon, 2015, 92:245-253.
|
Ke L, Lv W, Su F, et al. Electrode thickness control:Precondition for quite different functions of graphene conductive additives in LiFePO4 electrode[J]. Carbon, 2015, 92:311-317.
|
Zhou F, Qiu K, Peng G, et al. Silver/carbon nanotube hybrids:A novel conductive network for high-rate lithium ion batteries[J]. Electrochimica Acta, 2015, 151:16-20.
|
Lin H B, Huang W Z, Rong H B, et al. Surface natures of conductive carbon materials and their contributions to charge/discharge performance of cathodes for lithium ion batteries[J]. Journal of Power Sources, 2015, 287:276-282.
|
Chen T, Pan L, Liu X, et al. A comparative study on electrochemical performances of the electrodes with different nanocarbon conductive additives for lithium ion batteries[J]. Materials Chemistry and Physics, 2013, 142:345-349.
|
Bian X, Fu Q, Qiu C, et al. Carbon black and vapor grown carbon fibers binary conductive additive for the Li1.18Co0.15Ni0.15Mn0.52O2 electrodes for Li-ion batteries[J]. Materials Chemistry and Physics, 2015, 156:69-75.
|
Wang K, Wu Y, Luo S, et al. Hybrid super-aligned carbon nanotube/carbon black conductive networks:A strategy to improve both electrical conductivity and capacity for lithium ion batteries[J]. Journal of Power Sources, 2013, 233:209-215.
|
Li Y, Lu X, Su F, et al. A graphene/carbon black hybrid material:a novel binary conductive additive for lithium-ion batteries[J]. New Carbon Materials, 2015, 30:128.
|
Chen W, Hsieh C, Weng Y, et al. Effects of a graphene nanosheet conductive additive on the high-capacity lithium-excess manganese-nickel oxide cathodes of lithium-ion batteries[J]. J Appl Electrochem, 2014, 44:1171-1177.
|