Preparation of new carbon molecular sieves for optimized carbon dioxide adsorption and product yield

Ugur Morali; Hakan Demiral; Sevgi Sensoz

doi:10.1016/S1872-5805(20)60485-1

Volume 35 Issue 3

Turn off MathJax

Article Contents

Article Navigation > New Carbon Mater. > 2020 > 35(3): 209-219

Ugur Morali, Hakan Demiral, Sevgi Sensoz. Preparation of new carbon molecular sieves for optimized carbon dioxide adsorption and product yield. New Carbon Mater., 2020, 35(3): 209-219. doi: 10.1016/S1872-5805(20)60485-1

Citation:

Ugur Morali, Hakan Demiral, Sevgi Sensoz. Preparation of new carbon molecular sieves for optimized carbon dioxide adsorption and product yield. New Carbon Mater., 2020, 35(3): 209-219. doi: 10.1016/S1872-5805(20)60485-1

Citation:

PDF( 4395 KB)

Preparation of new carbon molecular sieves for optimized carbon dioxide adsorption and product yield

doi: 10.1016/S1872-5805(20)60485-1

Department of Chemical Engineering, Eskisehir Osmangazi University, Eskisehir 26040, Turkey

More Information

Corresponding author: Ugur Morali.E-mail:umorali@ogu.edu.tr
Received Date: 2020-02-20
Rev Recd Date: 2020-05-12
Publish Date: 2020-06-28

Abstract

Abstract

Chemical vapor deposition (CVD) from methane on activated carbon prepared by zinc chloride activation of residue extracted from sunflower seeds, has been optimized to produce carbon molecular sieves using the Taguchi method, targeted at achieving maximum CO₂ adsorption capacity and an increased product yield. The carbon molecular sieves were characterized by N₂ adsorption, CO₂ adsorption, elemental analysis, SEM and FTIR. The CO₂ adsorption capacities were measured at 1 bar/273 K. The optimized carbon molecular sieve with the highest product yield of 91 wt.% had a maximum CO₂ adsorption of 2.622 8 mmol g^-1. Both nitrogen and oxygen surface functional groups and the narrow micropores are crucial for CO₂ adsorption. The Taguchi method is a powerful tool to simultaneously optimize the carbon dioxide adsorption capacity and the yield of carbon molecular sieves.
- Chemical vapor deposition,
- Carbon molecular sieve,
- Carbon dioxide adsorption,
- Optimization

FullText(HTML)

References(31)

References

X Zhang, W Li, A Lu. Designed porous carbon materials for efficient CO₂ adsorption and separation[J]. New Carbon Materials, 2015, 30(6):481-501.

J Sreńscek-Nazzal, K Kie?basa. Advances in modification of commercial activated carbon for enhancement of CO₂ capture[J]. Applied Surface Science, 2019, 494:137-151.

G Huang, Y Liu, X Wu, et al. Activated carbons prepared by the KOH activation of a hydrochar from garlic peel and their CO₂ adsorption performance[J]. New Carbon Materials, 2019, 34(3):247-257.

H Demiral, I Demiral. Preparation and characterization of carbon molecular sieves from chestnut shell by chemical vapor deposition[J]. Advanced Powder Technology, 2018, 29(12):3033-3039.

Z Tang, H Zhuo, G Yang, et al. Preparation of nanoporous carbons with hierarchical pore structure for CO₂ capture[J]. New Carbon Materials, 2013, 28(1):55-60.

X Wu, C Zhang, Z Tian, et al. Large-surface-area carbons derived from lotus stem waste for efficient CO₂ capture[J]. New Carbon Materials, 2018, 33(3):252-261.

I Majchrzak-Kuc?ba, D Wawrzyńczak, ?ciubid?o, et al. Stability and regenerability of activated carbon used for CO₂ removal in pilot DR-VPSA unit in real power plant conditions[J]. Journal of CO₂ Utilization, 2019, 29:1-11.

H Deng, S Jin, Z Liang, et al. Synthesis of porous carbons derived from metal-organic coordination polymers and their adsorption performance for carbon dioxide[J].New Carbon Materials, 2012, 27(3):194-199.

T Song, J Liao, J Xiao, et al. Effect of micropore and mesopores structure on CO₂ adsorption by activated carbons from biomass[J]. New Carbon Materials, 2015, 30(2):156-166.

L Liu, J Lu, Y Zhang, et al. Synthesis of nitrogen-doped graphitic carbon nanocapsules from a poly (ionic liquid) for CO₂ capture[J]. New Carbon Materials, 2017, 32(4):380-384.

S K Salestan, M Taghizadeh. The effect of impurity on the separation of CO₂ from N₂ by MCM-41:A simulation study[J]. Chemical Physics, 2019, 524:124-130.

L Chen, X Jiang, J Qiu, et al. Selective CO₂ adsorption and H₂ storage in two porous amine-pillared graphene oxide frameworks[J]. Journal of Solid State Chemistry, 2019, 279:120980.

J McEwen, J D Hayman, A O Yazaydin. A comparative study of CO₂, CH₄ and N₂ adsorption in ZIF-8, Zeolite-13X and BPL activated carbon[J]. Chemical Physics, 2013, 412:72-76.

Z Jin, J Wang, R Zhao, et al. Synthesis of S, N co-doped porous carbons from polybenzoxazine for CO₂ capture[J]. New Carbon Materials, 2018, 33(5):392-401.

N A Rashidi, S Yusup. Potential of palm kernel shell as activated carbon precursors through single stage activation technique for carbon dioxide adsorption[J]. Journal of Cleaner Production, 2017, 168:474-486.

U Morali, H Demiral, S Sensoz. Optimization of activated carbon production from sunflower seed extracted meal:Taguchi design of experiment approach and analysis of variance[J]. Journal of Cleaner Production, 2018, 189:602-611.

U Morali, H Demiral, S Sensoz. Synthesis of carbon molecular sieve for carbon dioxide adsorption:Chemical vapor deposition combined with Taguchi design of experiment method[J]. Powder Technology, 2019, 355:716-726.

Y Yamane, H Tanaka, M T Miyahara. In silico synthesis of carbon molecular sieves for high-performance air separation[J]. Carbon, 2019, 141:626-634.

I Krkljus, T Steriotis, G Charalambopoulou, et al. H₂/D₂ adsorption and desorption studies on carbon molecular sieves with different pore structures[J]. Carbon, 2013, 57:239-247.

H R Yu, S Cho, B C Bai, et al. Effects of fluorination on carbon molecular sieves for CH₄/CO₂ gas separation behavior[J]. International Journal of Greenhouse Gas Control, 2012, 10:278-284.

S Cho, H R Yu, T H Choi, et al. Surface functionalization and CO₂ uptake on carbon molecular sieves:Experimental observation and theoretical study[J]. Applied Surface Science, 2018, 447:8-14.

A Wahby, J Silvestre-Albero, A Sepúlveda-Escribano, et al. CO₂ adsorption on carbon molecular sieves[J]. Microporous and Mesoporous Materials, 2012, 164:280-287.

E Rodriguez, R Garcia. Low-cost hierarchical micro/macroporous carbon foams as efficient sorbents for CO₂ capture[J]. Fuel Processing Technology, 2017, 156:235-245.

P Zhang, Y Zhong, J Ding, et al. A new choice of polymer precursor for solvent-free method:Preparation of N-enriched porous carbons for highly selective CO₂ capture[J]. Chemical Engineering Journal, 2019, 355:963-973.

J Uebbing, L K Rihko-Struckmann, K Sundmacher. Exergetic assessment of CO₂ methanation processes for the chemical storage of renewable energies[J]. Applied Energy, 2019, 233-234:271-282.

F Qin, Z Guo, J Wang, et al. Nitrogen-doped asphaltene-based porous carbon nanosheet for carbon dioxide capture[J]. Applied Surface Science, 2019, 491:607-615.

L Shao, Y Sang, J Huang. Imidazole-based hyper-cross-linked polymers derived porous carbons for CO₂ capture[J]. Microporous and Mesoporous Materials, 2019, 275:131-138.

Z Tian, J Huang, X Zhang, et al. Ultra-microporous N-doped carbon from polycondensed framework precursor for CO₂ adsorption[J]. Microporous and Mesoporous Materials, 2018, 257:19-26.

S Zhang, Q Zhou, X Jiang, et al. Preparation and evaluation of nitrogen-tailored hierarchical meso-/micro-porous activated carbon for CO₂ adsorption[J]. Environmental Technology, 2019:1-10.

M Dizbay-Onat, U K Vaidya, C T Lungu. Preparation of industrial sisal fiber waste derived activated carbon by chemical activation and effects of carbonization parameters on surface characteristics[J]. Industrial Crops and Products, 2017, 95:583-590.

D Tiwari, H Bhunia, P K Bajpai. Adsorption of CO₂ on KOH activated, N-enriched carbon derived from urea formaldehyde resin:kinetics, isotherm and thermodynamic studies[J]. Applied Surface Science, 2018, 439:760-771.

Relative Articles

Supplements(0)

Cited By

Proportional views