Effects of the deposition temperature on the microwave-absorption performance of Fe/CNT composites

LIU Yuan; LAI Jie; SHI Jin-feng

doi:10.1016/S1872-5805(20)60500-5

Volume 35 Issue 4

Turn off MathJax

Article Contents

Article Navigation > New Carbon Mater. > 2020 > 35(4): 428-435

LIU Yuan, LAI Jie, SHI Jin-feng. Effects of the deposition temperature on the microwave-absorption performance of Fe/CNT composites. New Carbon Mater., 2020, 35(4): 428-435. doi: 10.1016/S1872-5805(20)60500-5

Citation:

LIU Yuan, LAI Jie, SHI Jin-feng. Effects of the deposition temperature on the microwave-absorption performance of Fe/CNT composites. New Carbon Mater., 2020, 35(4): 428-435. doi: 10.1016/S1872-5805(20)60500-5

Citation:

PDF( 5025 KB)

Effects of the deposition temperature on the microwave-absorption performance of Fe/CNT composites

doi: 10.1016/S1872-5805(20)60500-5

Xi'an Research Institute of High Technology, Xi'an 710025, China

Funds: Chongqing Basic Science and Frontier Technology Research Special Support (cstc2017jcyjax0078).

Received Date: 2020-04-02
Rev Recd Date: 2020-07-05
Publish Date: 2020-08-28

Abstract

Abstract

Iron coated carbon nanotube (CNT) nanocomposite absorbents were prepared by a metal organic chemical vapor deposition method using carbonyl iron as the Fe precursor. The microstructures and electromagnetic properties of the composites were characterized by XRD, FESEM, TEM, and a vector network analyzer. Results show that the morphology and microwave absorption properties of these core-shell composites are controlled by changing the deposition temperature. The number of iron nanoparticles deposited on the surface of the CNTs gradually increases with increasing deposition temperature in the range 210-240℃. Too high a temperature (270℃) causes agglomeration of the Fe nanoparticles on the surface of the CNTs. When the thickness of the electromagnetic coating is 2.9 mm, the composite prepared at 240℃ has the best microwave absorption, with a maximum absorption bandwidth of 6.1 GHz (10.2-16.3 GHz), a minimum reflectivity of -28.3 dB and an absorption intensity less than -10 dB at 6.1 GHz.
- Carbon nanotubes,
- In-situ growth,
- Electromagnetic wave absorption

FullText(HTML)

References(21)

References

Xia J, Li S M, Gao S, et al. Preparation of CoNiP nanoparticles supported on nitrogen-doped carbon nanotubes as high performance electrocatalysts for the hydrogen evolution reaction[J]. New Carbon Materials, 2020, 35(1):87-96.

Liang C,Yu Y,Chen C, et al. Rational design of CNTs with encapsulated Co nanospheres as superior acidic-and-basic-resistant microwave absorber[J]. Dalton Transactions, 2018, 47(33):11554-11562.

Wen F, Zhang F, et al. Investigation on microwave absorption properties for multiwalled carbon nanotubes/Fe/Co/Ni nanopowders as lightweight absorbers[J]. J Phys Chem C 2011, 115, 14025-14030.

Cheng Y,Cao J,Lu H, et al. In situ regulating aspect ratio of bamboo-like CNTs via Co_xNi_1-x-catalyzed growth to pursue superior microwave attenuation in X-band[J]. Inorganic Chemistry Frontiers, 2019, 6:309-316.

Qi Q, Huang Y, Xu M, et al. Synthesis and microwave absorption properties of sandwich-type CNTs/Fe₃O₄/RGO composite with Fe₃O₄ as a bridge[J]. Journal of Materials Science, 2017, 28(20):15043-15049.

Yang S,You W,Qiu L, et al. Progress on microwave absorption materials with core-shell structure[J]. Chinese Science Bulletin, 2018, 63(8):712-724.

Liu P,Gao S,Wang Y, et al. Core-shell CoNi@graphitic carbon decorated on B, N-codoped hollow carbon polyhedrons toward lightweight and high-efficiency microwave attenuation[J]. ACS Applied Materials & Interfaces, 2019, 11(28):25624-25635.

Wang S, Huang F, Zhang M, et al. Fe₃O₄/carbon chain-like core/shell composites:Synthesis and microwave absorption properties[J]. Integrated Ferroelectrics, 2018, 190(1):76-84.

Zhou L,Qiu J,Wang H, et al. Enhanced microwave absorption properties of carbonyl iron/resin composites incorporated with Ti₃SiC₂ particles[J]. Journal of Materials Science Materials in Electronics, 2019, 30(14):13774-13784.

Liu Y F, Li L X, Wang Y Y, et al. Corrosion resistance and wave absorbing property of carbonyl iron powder coating with alumina by atomic layer deposition[J]. Journal of Inorganic Materials, 2017, 32(7):751-757.

Ge C Q, Wang L Y, Liu G, et al. Effect of different purification method on electromagnetic properties of multiwalled carbon nanotube[J]. Journal of Functional Materials, 2013, 5:713-717.

Xue R J, Wu Y C. Mechanism and electromagnetic properties of electroless plating Ni-Co-P/SiC nanometer composite powder[J]. Journal of the Chinese Ceramic Society, 2008, 36(4):555-558.

Ma Z. Preparation and high frequency research on micro and nano magnetic materials[D]. Lanzhou University, 2012.

Xie S, Guo X N, Jin G Q, et al. Carbon coated Co-SiC nanocomposite with high-performance microwave absorption[J]. Physical Chemistry Chemical Physics, 2013, 15(38):16104-16110.

Li G, Wang L, Li W, et al. CoFe₂O₄ and/or Co₃Fe₇ loaded porous activated carbon balls as a lightweight microwave absorbent[J]. Physical Chemistry Chemical Physics, 2014, 16(24):12385-12392.

Han Z Q. Ferrite and its Magnetic Physics[M]. Aviation Industry Press, 2010.

Qiao M, Lei X, Ma Y, et al. Application of yolk-shell Fe₃O₄@N-doped carbon nanochains as highly effective microwave-absorption material[J]. Nano Research, 2017, 11(3):1500-1519.

Pan G, Zhu J, Ma S, et al. Enhancing the electromagnetic performance of Co through the phase-controlled synthesis of hexagonal and cubic Co nanocrystals grown on graphene[J]. ACS applied materials & interfaces, 2013, 5(23):12716-12724.

Bregar V B. Advantages of ferromagnetic nanoparticle composites in microwave absorbers[J]. Magnetics, IEEE Transactions on, 2004, 40(3):1679-1684.

Naito Y, Suetake K. Application of ferrite to electromagnetic wave absorber and its characteristics[J]. IEEE Trans Microwave Theory Techniq, 1971, 19:65-72.

Meshram M R, Nawal K Agrawal, Bharoti Sinha, et al. Characterization of M-type barium hexagonal ferrite based wide band microwave absorber[J]. Journal of Magnetism and Magnetic Materials, 2004, 271:207-214.

Relative Articles

Supplements(0)

Cited By

Proportional views