Citation: | HE Su-jiao, ZHANG Kai-qiang, ZOU Ya-jun, TIAN Zhi-hong. Three-dimensional printed carbon-based microbatteries: progress on technologies, materials and applications. New Carbon Mater., 2022, 37(5): 898-917. doi: 10.1016/S1872-5805(22)60634-6 |
[1] |
Zhang L, Ge L, He G, et al. Tuning the linkers in polymer-based cathodes to realize high sulfur content and high-performance potassium–sulfur batteries[J]. The Journal of Physical Chemistry C,2021,125:18604-18613.
|
[2] |
Lyu Z, Lim G J H, Koh J J, et al. Design and manufacture of 3D-printed batteries[J]. Joule,2021,5:89-114. doi: 10.1016/j.joule.2020.11.010
|
[3] |
Tian Z, Zhang Y, Zhu J, et al. A reanalysis of the diverse sodium species in carbon anodes for sodium ion batteries: a thermodynamic view[J]. Advanced Energy Materials,2021,11:2102489. doi: 10.1002/aenm.202102489
|
[4] |
Huang J, Li Y, Xie R, et al. Structural engineering of cathodes for improved Zn-ion batteries[J]. Journal of Energy Chemistry,2021,58:147-155. doi: 10.1016/j.jechem.2020.09.035
|
[5] |
Xu F, Qu C, Lu Q, et al. Atomic-Sn-enabled high utilization, large capacity, and long life Na anode[J]. Science Advances,2022,8:7489. doi: 10.1126/sciadv.abm7489
|
[6] |
Zhang W, Liu H, Zhang X, et al. 3D printed micro-electrochemical energy storage devices: from design to integration[J]. Advanced Functional Materials,2021:2104909.
|
[7] |
Zheng Y, Huang X, Chen J, et al. A review of conductive carbon materials for 3D printing: materials, technologies, properties, and applications[J]. Materials,2021,14:3911. doi: 10.3390/ma14143911
|
[8] |
Zong W, Chui N, Tian Z, et al. Ultrafine MoP nanoparticle splotched nitrogen-doped carbon nanosheets enabling high-performance 3D-printed potassium-ion hybrid capacitors[J]. Advanced Science,2021,8:2004142. doi: 10.1002/advs.202004142
|
[9] |
Brown E, Yan P L, Tekik H. 3D printing of hybrid MoS2-graphene aerogels as highly porous electrode materials for sodium ion battery anodes[J]. Materials & Design,2019,170:107689.
|
[10] |
Liu C, Xu F, Liu Y. High mass loading ultrathick porous Li4Ti5O12 electrodes with improved areal capacity fabricated via low temperature direct writing[J]. Electrochimica Acta,2019,314:81-88. doi: 10.1016/j.electacta.2019.05.082
|
[11] |
Sun K, Wei, T S, Ahn B Y. 3D printing of interdigitated Li-ion microbattery architectures.[J]. Advanced Materials,2013,25:4539-4543. doi: 10.1002/adma.201301036
|
[12] |
Ding J, Shen K, Du Z, et al. 3D-printed hierarchical porous frameworks for sodium storage[J]. ACS Applied Materials & Interfaces,2017,9:41871-41877.
|
[13] |
Down M P, Martínez-Periñán E, Foster C W, et al. Next-generation additive manufacturing of complete standalone sodium-ion energy storage architectures[J]. Advanced Energy Materials,2019,9:1803019. doi: 10.1002/aenm.201803019
|
[14] |
Nicolas P B V, Celzard V F A. 3D printing of carbon-based materials: A review[J]. Carbon,2021,183:449-485. doi: 10.1016/j.carbon.2021.07.036
|
[15] |
Li Y, Huang J, Kang L, et al. Self-assembled carbon nanoribbons with the heteroatom doping used as ultrafast charging cathodes in zinc-ion hybrid supercapacitors[J]. Science China Materials,2022,65:1495-1502. doi: 10.1007/s40843-021-1923-6
|
[16] |
Lai F, Feng J, Heil T, et al. Partially delocalized charge in Fe-doped NiCo2S4 nanosheet–mesoporous carbon-composites for high-voltage supercapacitors[J]. Journal of Materials Chemistry A,2019,7:19342-19347. doi: 10.1039/C9TA06250E
|
[17] |
Tian Z, Lai F, Heil T, et al. Synthesis of carbon frameworks with N, O and S-lined pores from gallic acid and thiourea for superior CO2 adsorption and supercapacitors[J]. Science China Materials,2020,643:748-757.
|
[18] |
Zhu T, Liu S, Wan K, et al. Fluorine and nitrogen dual-doped porous carbon nanosheet-enabled compact electrode structure for high volumetric energy storage[J]. ACS Applied Energy Materials,2020,3:4949-4957.
|
[19] |
Fu K, Wang Y, Yan C, et al. Graphene oxide-based electrode inks for 3D-printed lithium-ion batteries[J]. Advanced Materials,2016,28:2587-2594. doi: 10.1002/adma.201505391
|
[20] |
Zhou S, Usman I, Wang Y, et al. 3D printing for rechargeable lithium metal batteries[J]. Energy Storage Materials,2021,38:141-156. doi: 10.1016/j.ensm.2021.02.041
|
[21] |
Zhou H, Yang H, Yao S, et al. Synthesis of 3D printing materials and their electrochemical applications[J]. Chinese Chemical Letters,2022,33:3681-3694. doi: 10.1016/j.cclet.2021.11.018
|
[22] |
Narita K, Saccone M A, Sun Y, et al. Additive manufacturing of 3D batteries: a perspective[J]. Journal of Materials Research,2022,37:1535-1546. doi: 10.1557/s43578-022-00562-w
|
[23] |
Lyu Z, Lim G J H, Guo R, et al. 3D-printed MOF-derived hierarchically porous frameworks for practical high-energy density Li-O2 batteries[J]. Advanced Functional Materials,2019,29:1806658. doi: 10.1002/adfm.201806658
|
[24] |
Qiao Y, Liu Y, Chen C, et al. 3D-printed graphene oxide framework with thermal shock synthesized nanoparticles for Li-CO2 batteries[J]. Advanced Functional Materials,2018,28:1805899. doi: 10.1002/adfm.201805899
|
[25] |
Togonon J J H, Chiang P C, Lin H J, et al. Pure carbon-based electrodes for metal-ion batteries[J]. Carbon Trends,2021,3:100035. doi: 10.1016/j.cartre.2021.100035
|
[26] |
Zhang J, Li X, Fan S, et al. 3D-printed functional electrodes towards Zn-Air batteries[J]. Materials Today Energy,2020,16:100407. doi: 10.1016/j.mtener.2020.100407
|
[27] |
Gao X, Yang X, Wang S, et al. A 3D-printed ultra-high Se loading cathode for high energy density quasi-solid-state Li–Se batteries[J]. Journal of Materials Chemistry A,2020,8:278-286. doi: 10.1039/C9TA10623E
|
[28] |
Lin X, Wang J, Gao X, et al. 3D printing of free-standing “O2 breathable” air electrodes for high-capacity and long-life Na-O2 batteries[J]. Chemistry of Materials,2020,32:3018-3027. doi: 10.1021/acs.chemmater.9b05360
|
[29] |
Gao W, Pumera M. 3D printed nanocarbon frameworks for Li-ion battery cathodes[J]. Advanced Functional Materials,2021,31:2007285. doi: 10.1002/adfm.202007285
|
[30] |
Lyu Z, Lim G J H, Guo R, et al. 3D-printed electrodes for lithium metal batteries with high areal capacity and high-rate capability[J]. Energy Storage Materials,2020,24:336-342. doi: 10.1016/j.ensm.2019.07.041
|
[31] |
Gao X, Sun Q, Yang X, et al. Toward a remarkable Li-S battery via 3D printing[J]. Nano Energy,2019,56:595-603. doi: 10.1016/j.nanoen.2018.12.001
|
[32] |
Praveen S, Sim G S, Shaji N, et al. 3D-printed self-standing electrodes for flexible Li-ion batteries[J]. Applied Materials Today,2022,26:100980. doi: 10.1016/j.apmt.2021.100980
|
[33] |
Maurel A, Grugeon S, Fleutot B, et al. Three-dimensional printing of a LiFePO4/graphite battery cell via fused deposition modeling[J]. Scientific Reports,2019,9:18031. doi: 10.1038/s41598-019-54518-y
|
[34] |
Wang J, Sun Q, Gao X, et al. Toward high areal energy and power density electrode for Li-ion batteries via optimized 3D printing approach[J]. ACS Applied Materials & Interfaces,2018,10:39794-39801.
|
[35] |
Miyamoto K, Sasaki T, Nishi T, et al. 3D-microbattery architectural design optimization using automatic geometry generator and transmission-line model[J]. iScience,2020,23:101317. doi: 10.1016/j.isci.2020.101317
|
[36] |
Rocha V G, García-Tuñon E, Botas C, et al. Multimaterial 3D printing of graphene-based electrodes for electrochemical energy storage using thermoresponsive inks[J]. ACS Applied Materials & Interfaces,2017,9:37136-37145.
|
[37] |
Zhang M, Mei H, Chang P, et al. 3D printing of structured electrodes for rechargeable batteries[J]. Journal of Materials Chemistry A,2020,8:10670. doi: 10.1039/D0TA02099K
|
[38] |
Hu J, Jiang Y, Cui S, et al. 3D-printed cathodes of LiMn1−xFexPO4 nanocrystals achieve both ultrahigh rate and high capacity for advanced lithium-ion battery[J]. Advanced Energy Materials,2016,6:1600856. doi: 10.1002/aenm.201600856
|
[39] |
Wang Y, Chen C, Xie H, et al. 3D-printed all-fiber Li-ion battery toward wearable energy storage[J]. Advanced Functional Materials,2017,27:1703140. doi: 10.1002/adfm.201703140
|
[40] |
Ambrosi A, Pumera M. 3D-printing technologies for electrochemical applications[J]. Chemical Society Reviews,2016,45:2740-2755. doi: 10.1039/C5CS00714C
|
[41] |
Narita K, Citrin M A, Yang H, et al. 3D architected carbon electrodes for energy storage[J]. Advanced Energy Materials,2021,11:2002637. doi: 10.1002/aenm.202002637
|
[42] |
Shen K, Mei H, Li B, et al. 3D printing sulfur copolymer-graphene architectures for Li-S batteries[J]. Advanced Energy Materials,2018,8:701527.
|
[43] |
Jansson A, Pejryd L. Characterisation of carbon fibre-reinforced polyamide manufactured by selective laser sintering[J]. Additive Manufacturing,2016,9:7-13. doi: 10.1016/j.addma.2015.12.003
|
[44] |
Yan M, Tian X, Peng G, et al. Hierarchically porous materials prepared by selective laser sintering[J]. Materials & Design,2017,135:62-68.
|
[45] |
Lahtinen E Kukkonen E, Jokivartio J, et al. Preparation of highly porous carbonous electrodes by selective laser sintering[J]. ACS Applied Energy Materials,2019,2:1314-1318. doi: 10.1021/acsaem.8b01881
|
[46] |
Wang P, Zhang H, Wang H, et al. Hybrid manufacturing of 3D hierarchical porous carbons for electrochemical storage[J]. Advanced Materials Technologies,2020,5:1901030. doi: 10.1002/admt.201901030
|
[47] |
Foster C W, Down M P, Zhang Y, et al. 3D printed graphene based energy storage devices[J]. Scientifc Reports,2017,7:11. doi: 10.1038/s41598-017-00052-8
|
[48] |
Foster C W, Zou G Q, Jiang Y, et al. Next generation additive manufacturing: tailorable graphene/polylactic(acid) filaments allow the fabrication of 3D printable porous anodes for utilisation within lithium-ion batteries[J]. Batteries & Supercaps,2019,2:448-453.
|
[49] |
Ragones H, Menkin S, Kamir Y. Towards smart free form-factor 3D printable batteries[J]. Sustainable Energy Fuels,2018,2:1542-1549. doi: 10.1039/C8SE00122G
|
[50] |
Maurel A, Courty M, Fleutot M, et al. Highly loaded graphite-polylactic acid composite-based filaments for lithium-ion battery three-dimensional printing[J]. Chemistry of Materials,2018,30:7484-7493. doi: 10.1021/acs.chemmater.8b02062
|
[51] |
Delannoy P-E, Riou B, Brousse T, et al. Ink-jet printed porous composite LiFePO4 electrode from aqueous suspension for microbatteries[J]. Journal of Power Sources,2015,287:261-268. doi: 10.1016/j.jpowsour.2015.04.067
|
[52] |
Azhari A, Marzbanrad E, Yilman D, et al. Binder-jet powder-bed additive manufacturing (3D printing) of thick graphene-based electrodes[J]. Carbon,2017,119:257-266. doi: 10.1016/j.carbon.2017.04.028
|
[53] |
Yang H, Feng Z, Teng X, et al. Three-dimensional printing of high-mass loading electrodes for energy storage applications[J]. InfoMat,2021:1-17.
|
[54] |
Lacey S D, Kirsch D J, Li Y. Extrusion-based 3D printing of hierarchically porous advanced battery eectrodes[J]. Advanced Materials,2018,30:1705651. doi: 10.1002/adma.201705651
|
[55] |
Zhang X, Wang J, Liu T. 3D printing of polycaprolactone-based composites with diversely tunable mechanical gradients via multi-material fused deposition modeling[J]. Composites Communications,2021,23:100600. doi: 10.1016/j.coco.2020.100600
|
[56] |
Zhang X, Wang J L. Controllable interfacial adhesion behaviors of polymer-on-polymer surfaces during fused deposition modeling 3D printing process[J]. Chemical Physics Letters,2020,739:136959. doi: 10.1016/j.cplett.2019.136959
|
[57] |
Mohamed O A, Masood S H, Bhowmik J Optimization of fused deposition modeling process parameters: a review of current research and future prospects [J]. Advances in Manufacturing, 2015, 3: 42-53.
|
[58] |
Acord K A, Dupuy A D, Bertoli U S, et al. Morphology, microstructure, and phase states in selective laser sintered lithium ion battery cathodes[J]. Journal of Materials Processing Technology,2020,228:116827.
|
[59] |
Yu Y, Chen M, Wang S, et al. Laser sintering of printed anodes for Al-air batteries[J]. Journal of the Electrochemical Society,2018,165:A584-A592. doi: 10.1149/2.0811803jes
|
[60] |
Iwabuchi Y, Yan J. Laser sintering of silicon powder and carbon nanofibers for porous composite thick films[J]. Applied Physics Express,2015,8:026501. doi: 10.7567/APEX.8.026501
|
[61] |
Sha J, Li Y, Salvatierra R V, et al. Three-dimensional printed graphene foams[J]. ACS Nano,2017,11:6860-6867. doi: 10.1021/acsnano.7b01987
|
[62] |
Wang C, Taherabadi L, Jia G, et al. C-MEMS for the manufacture of 3D microbatteries[J]. Electrochemical and Solid-State Letters,2004,7:A435-A438. doi: 10.1149/1.1798151
|
[63] |
Chen Q, Xu R, He Z, et al. Printing 3D gel polymer electrolyte in lithium-ion microbattery using stereolithography[J]. Journal Of The Electrochemical Society,2017,164:A1852-A1857. doi: 10.1149/2.0651709jes
|
[64] |
Milroy C, Manthiram A. Printed microelectrodes for scalable, high-areal-capacity lithium-sulfur batteries[J]. Chemical Communications,2016,52:4282-4285. doi: 10.1039/C5CC10503J
|
[65] |
Milroy C A, Jang S, Fujimori T, et al. Inkjet-printed lithium-sulfur microcathodes for all-printed, integrated nanomanufacturing[J]. Small,2017,13:1603786. doi: 10.1002/smll.201603786
|
[66] |
Liu S, Wan K, Zhang C, et al. Polyaniline-decorated 3D carbon porous network with excellent electrolyte wettability and high energy density for supercapacitors[J]. Composites Communications,2021,24:100610. doi: 10.1016/j.coco.2020.100610
|
[67] |
Yang J, Han H, Pepich H, et al. Recent progress on the design of hollow carbon spheres to host sulfur in room-temperature sodium-sulfur batteries[J]. New Carbon Materials,2020,35:630-645. doi: 10.1016/S1872-5805(20)60519-4
|
[68] |
Xu F, Zhai Y, Zhang E, et al. Ultrastable surface-dominated pseudocapacitive potassium storage enabled by edge-enriched N-doped porous carbon nanosheets[J]. Angewandte Chemie International Edition,2020,59:19460-19467. doi: 10.1002/anie.202005118
|
[69] |
Zou Y, Sun C, Li S, et al. Construction of flexible, integrated rechargeable Li battery based on the coaxial carbon/quaternary oxide composite anode [J]. New Carbon Materials, 2022:doi: 0.1016/S1872-5805(1022)60617-60616.
|
[70] |
Ji K, Han J, Hirata A, et al. Lithium intercalation into bilayer graphene[J]. Nature Communications,2019,10:275. doi: 10.1038/s41467-018-07942-z
|
[71] |
Xiong Z, Yun S Y, Jin H J. Applications of carbon nanotubes for lithium ion battery anodes[J]. Materials,2013,6:1138-1158. doi: 10.3390/ma6031138
|
[72] |
Roselin L S, Juang R S, Hsieh C T, et al. Recent advances and perspectives of carbon-based nanostructures as anode materials for Li-ion batteries[J]. Materials,2019,12:1229. doi: 10.3390/ma12081229
|
[73] |
Zhang X, Yang J, Ren Z, et al. In situ observation of electrolyte-dependent interfacial evolution of graphite anode in sodium-ion batteries via atomic force microscopy[J]. New Carbon Materials,2022,37:371-380. doi: 10.1016/S1872-5805(22)60601-2
|
[74] |
Reyes C, Somogyi R, Niu S, et al. Three-dimensional printing of a complete lithium ion battery with fused filament fabrication[J]. ACS Applied Energy Materials,2018,1:5268-5279.
|
[75] |
Egorov V, Gulzar U, Zhang Y, et al. Evolution of 3D printing methods and materials for electrochemical energy storage[J]. Advanced Materials,2020:2000556.
|
[76] |
Vernardou D, Vasilopoulos K C, Kenanakis G. 3D printed graphene-based electrodes with high electrochemical performance[J]. Applied Physics A,2017,123:623. doi: 10.1007/s00339-017-1238-1
|
[77] |
Kim J, Kumar R, Bandodkar A J, et al. Advanced materials for printed wearable electrochemical devices: a review[J]. Advanced Electronic Materials,2017,3:1600260. doi: 10.1002/aelm.201600260
|
[78] |
Pei S, Cheng H M. The reduction of graphene oxide[J]. Carbon,2012,50:3210-3228. doi: 10.1016/j.carbon.2011.11.010
|
[79] |
Li H, Liang J. Recent development of printed micro-supercapacitors: printable materials, printing technologies, and perspectives[J]. Advanced Materials,2020,32:1805864. doi: 10.1002/adma.201805864
|
[80] |
Guo B, Liang G, Yu S, et al. 3D printing of reduced graphene oxide aerogels for energy storage devices: A paradigm from materials and technologies to applications[J]. Energy Storage Materials,2021,39:146-165. doi: 10.1016/j.ensm.2021.04.021
|
[81] |
Zhang L, Zhang M, Guo H, et al. A universal polyiodide regulation using quaternization engineering toward high value-added and ultra-stable zinc-iodine batteries[J]. Advanced Science,2022,9:2105598. doi: 10.1002/advs.202105598
|
[82] |
He G, Liu Y, Gray D E, et al. Conductive polymer composites cathodes for rechargeable aqueous Zn-ion batteries: A mini-review[J]. Composites Communications,2021,27:100882. doi: 10.1016/j.coco.2021.100882
|
[83] |
Zhu C, Han T Y J, Duoss E B, et al. Highly compressible 3D periodic graphene aerogel microlattices[J]. Nature Communications,2015,6:6962. doi: 10.1038/ncomms7962
|
[84] |
Kordás K, Mustonen T, Tóth G, et al. Inkjet printing of electrically conductive patterns of carbon nanotubes[J]. Small,2006,2:1021-1025. doi: 10.1002/smll.200600061
|
[85] |
Tian Z, Chui N, Lian R, et al. Dual anionic vacancies on carbon nanofiber threaded MoSSe arrays: A free-standing anode for high-performance potassium-ion storage[J]. Energy Storage Materials,2020,27:591-598. doi: 10.1016/j.ensm.2019.12.016
|
[86] |
Ghebretinsae F, Mikkelsen O, Akessa A D, et al. Strength analysis of 3D printed carbon fibre reinforced thermoplastic using experimental and numerical methods[J]. IOP Conference Series:Materials Science and Engineering,2019,700:012024. doi: 10.1088/1757-899X/700/1/012024
|
[87] |
Huang P, Xia Z D, Cui S. 3D printing of carbon fiber-filled conductive silicon rubber[J]. Materials & Design,2018,142:11-21.
|
[88] |
Athreya S R, Kalaitzidou K, Das S. Processing and characterization of a carbon black-filled electrically conductive Nylon-12 nanocomposite produced by selective laser sintering[J]. Materials Science and Engineering:A,2010,527:2637-2642. doi: 10.1016/j.msea.2009.12.028
|
[89] |
Hamzah H H B, Keattch O, Covill D, et al. The effects of printing orientation on the electrochemical behaviour of 3D printed acrylonitrile butadiene styrene (ABS)/carbon black electrodes[J]. Scientific Reports,2018,8:9135. doi: 10.1038/s41598-018-27188-5
|
[90] |
Hong R, Zhao Z, Leng J, et al. Two-step approach based on selective laser sintering for high performance carbon black/polyamide 12 composite with 3D segregated conductive network[J]. Composites Part B:Engineering,2019,176:107214. doi: 10.1016/j.compositesb.2019.107214
|
[91] |
Costa G, Lopes P A, Sanati A L, et al. 3D printed stretchable liquid gallium battery[J]. Advanced Functional Materials,2022:2113232.
|
[92] |
Richter E M, Rocha D P, Cardoso R M, et al. A complete additively manufactured (3D-printed) electrochemical sensing platform[J]. Analytical Chemistry,2019,91:12844. doi: 10.1021/acs.analchem.9b02573
|
[93] |
Drews M, Tepner S, Haberzettl P, et al. Towards 3D-lithium ion microbatteries based on silicon/graphite blend anodes using a dispenser printing technique[J]. RSC Advances,2020,10:22440. doi: 10.1039/D0RA03161E
|
[94] |
Sun C, Liu S, Shi X, et al. 3D printing nanocomposite gel-based thick electrode enabling both high areal capacity and rate performance for lithium-ion battery[J]. Chemical Engineering Journal,2020,381:122641. doi: 10.1016/j.cej.2019.122641
|
[95] |
Gao X, Yanga X, Sun Q, et al. Converting a thick electrode into vertically aligned “Thin electrodes” by 3D-Printing for designing thickness independent Li-S cathode[J]. Energy Storage Materials,2020,24:682-688. doi: 10.1016/j.ensm.2019.08.001
|
[96] |
Cai J, Fan Z, Jin J, et al. Expediting the electrochemical kinetics of 3D-printed sulfur cathodes for Li-S batteries with high rate capability and areal capacity[J]. Nano Energy,2020,75:104970. doi: 10.1016/j.nanoen.2020.104970
|
[97] |
Chu T, Park S, Fu K, et al. 3D printing-enabled advanced electrode architecture design[J]. Carbon Energy,2021,3:424-439. doi: 10.1002/cey2.114
|
[98] |
Iputera K, Huang J Y, Haw S C, et al. Revealing the absence of carbon in aprotic Li–CO2 batteries: a mechanism study toward CO2 reduction under a pure CO2 environment[J]. Journal of Materials Chemistry A,2022,10:3460-3468. doi: 10.1039/D1TA08870J
|