Citation: | YANG Ping-jun, LI Tie-hu, LI Hao, DANG A-lei, YUAN Lei. Progress in the graphitization and applications of modified resin carbons. New Carbon Mater., 2023, 38(1): 96-110. doi: 10.1016/S1872-5805(23)60715-2 |
[1] |
Yin X M, Han L Y, Liu H M, et al. Recent progress in 1D nanostructures reinforced carbon/ carbon composites[J]. Advanced Function Materials,2022,32:2204965. doi: 10.1002/adfm.202204965
|
[2] |
Zhang C, Liu H, Zhou Y, et al. The effect of high temperature heat treatment on the tribological property of a carbon fiber/pyrolytic carbon /silicon carbide composite using polycarbosilane[J]. Ceramics International,2020,46(4):4493-4501. doi: 10.1016/j.ceramint.2019.10.176
|
[3] |
Yin J, Zhang W, Alhebshi N A, et al. Synthesis strategies of porous carbon for supercapacitor applications[J]. Small Methods,2020,4(3):1900853. doi: 10.1002/smtd.201900853
|
[4] |
Kubota K, Shimadzu S, Yabuuchi N, et al. Structural analysis of sucrose-derived hard carbon and correlation with the electrochemical properties for lithium, sodium, and potassium Insertion[J]. Chemistry of Materials,2020,32(7):2961-2977. doi: 10.1021/acs.chemmater.9b05235
|
[5] |
Liu S, Chevali V S, Xu Z, et al. A review of extending performance of epoxy resins using carbon nanomaterials[J]. Composites Part B:Engineering,2018,136:197-214. doi: 10.1016/j.compositesb.2017.08.020
|
[6] |
Sun Y, Peng Y, Zhang Y. A Study on the synthesis, curing behavior and flame retardance of a novel flame retardant curing agent for epoxy resin[J]. Polymers,2022,14(2):245. doi: 10.3390/polym14020245
|
[7] |
Song P, Ma Z, Qiu H, et al. High-Efficiency Electromagnetic Interference Shielding of rGO@FeNi/Epoxy Composites with Regular Honeycomb Structures[J]. Nano-Micro Lett,2022(003):014.
|
[8] |
Yun J, Chen L, Zhao H, et al. Boric acid as a coupling agent for preparation of phenolic resin containing boron and silicon with enhanced char yield[J]. Macromolecular Rapid Communications,2019,40(17):1800702. doi: 10.1002/marc.201800702
|
[9] |
Lu X F, Peng X, Chen J, et al. Oxidation behavior of C/C composites with the fibre/matrix interface modified by carbon nanotubes grown in situ at low temperature[J]. Corrosion Science,2012,55:20-25.
|
[10] |
Yuan G, Li X, Dong Z, et al. Pitch-based ribbon-shaped carbon-fiber-reinforced one-dimensional carbon/carbon composites with ultrahigh thermal conductivity[J]. Carbon,2014,68:413-425. doi: 10.1016/j.carbon.2013.11.018
|
[11] |
陈鸯飞. 高成炭率酚醛树脂的制备及其在C/C复合材料中的应用[D],.湖南大学, 2013.
Chen Y . Research on preparation of high char yield PF resin and its applications in C/C composite material[D]. Hunan University, 2013.
|
[12] |
Idesaki A, Yamamoto S, Sugimoto M, et al. Formation of Fe nanoparticles by ion implantation technique for catalytic graphitization of a phenolic resin[J]. Quantum Beam Science,2020,4(1):11. doi: 10.3390/qubs4010011
|
[13] |
Renda C G, Contreras Medrano C P, Costa L J D, et al. Role of ferrocene-derived iron species in the catalytic graphitization of novolak resins[J]. Journal of Materials Science,2021,56(2):1298-1311. doi: 10.1007/s10853-020-05312-z
|
[14] |
Renda C G, Bertholdo R, Venâncio T, et al. Influence of the mixing process on the graphitization of phenolic resins[J]. Ceramics International,2019,45(9):12196-12204. doi: 10.1016/j.ceramint.2019.03.124
|
[15] |
Bitencourt C S, Luz A P, Pagliosa C, et al. Role of catalytic agents and processing parameters in the graphitization process of a carbon-based refractory binder[J]. Ceramics International,2015,41(10):13320-13330. doi: 10.1016/j.ceramint.2015.07.115
|
[16] |
Darban S, Kakroudi M G, Vandchali M B, et al. Characterization of Ni-doped pyrolyzed phenolic resin and its addition to the Al2O3-C refractories[J]. Ceramics International,2020,46(13):20954-20962. doi: 10.1016/j.ceramint.2020.05.153
|
[17] |
Ren Q, He L, Hu S, et al. Formation of highly graphitic char derived from phenolic resin carbonization by Ni-Zn-B alloy[J]. Environmental Science and Pollution Research,2020,27(18):22639-22647. doi: 10.1007/s11356-020-08459-z
|
[18] |
Rastegar H, Mansorizadeh E. In situ formed nano-Ni catalytic effect on graphitization of phenolic resin (thermodynamic and microstructure investigation)[J]. Carbon Letters,2022:1-14.
|
[19] |
Chen Y, Dong J, Qiu L, et al. A catalytic etching-wetting- dewetting mechanism in the formation of hollow graphitic carbon fiber[J]. Chem,2017,2(2):299-310. doi: 10.1016/j.chempr.2017.01.005
|
[20] |
Ma C, Cao E, Li J, et al. Synthesis of mesoporous ribbon- shaped graphitic carbon nanofibers with superior performance as efficient supercapacitor electrodes[J]. Electrochimica Acta,2018,292:364-373. doi: 10.1016/j.electacta.2018.07.135
|
[21] |
Wang S, Zhu Y, Xu X, et al. Adsorption-based synthesis of Co3O4/C composite anode for high performance lithium-ion batteries[J]. Energy,2017,125:569-575. doi: 10.1016/j.energy.2017.02.155
|
[22] |
Dassanayake A C, Gonçalves A A S, Fox J, et al. One-pot synthesis of activated porous graphitic carbon spheres with cobalt nanoparticles[J]. Colloids and Surfaces A:Physicochemical and Engineering Aspects,2019,582:123884. doi: 10.1016/j.colsurfa.2019.123884
|
[23] |
Talabi S I, Luz A P, Pandolfelli V C, et al. Structural evolution during the catalytic graphitization of a thermosetting refractory binder and oxidation resistance of the derived carbons[J]. Materials Chemistry and Physics,2018,212:113-121. doi: 10.1016/j.matchemphys.2018.03.029
|
[24] |
Chandran M S, Sunitha K, Gayathri D S, et al. Boron-containing phenolic-siloxane hybrid polymers through facile click chemistry route[J]. Journal of Materials Science,2018,53(4):2497-2510. doi: 10.1007/s10853-017-1737-7
|
[25] |
Chen L, Fang T, Song C, et al. Catalytic graphitization of boron on the fabrication of high-performance carbon papers for gas diffusion layers in PEMFCs[J]. Catalysis Communications,2021,157:106332. doi: 10.1016/j.catcom.2021.106332
|
[26] |
Chen J, Xiong X, Xiao P. The effect of MWNTs on the microstructure of resin carbon and thermal conductivity of C/C composites[J]. Solid state sciences,2009,11(11):1890-1893. doi: 10.1016/j.solidstatesciences.2009.07.019
|
[27] |
Liang F, Li N, Li X K, et al. Effect of the addition of carbon black and carbon nanotubes on the structure and oxidation resistance of pyrolysed phenolic carbons[J]. New Carbon Materials,2012,27(4):283-287. doi: 10.1016/S1872-5805(12)60018-3
|
[28] |
Yang G, Wang Y, Zhou S, et al. Graphene/phenolic resin-based porous carbon composites with improved conductivity prepared via in situ polymerization in graphene hydrogels[J]. Journal of Materials Science,2019,54(3):2222-2230. doi: 10.1007/s10853-018-2983-z
|
[29] |
Alizadeh O, Hosseini H M, Pourjavadi A, et al. Effect of graphene oxide on morphological and structural properties of graphene reinforced novolac-derived carbon aerogels: A modified Quasi-Percolation Model[J]. Ceramics International,2020,46(8):11179-11188. doi: 10.1016/j.ceramint.2020.01.139
|
[30] |
Yi S, Chen J, Li H, et al. Effect of graphite oxide on graphitization of furan resin carbon[J]. Carbon,2010,48(3):926-928. doi: 10.1016/j.carbon.2009.11.027
|
[31] |
Yan D, Li S H, Guo L P, et al. Hard@ soft integrated morning glory like porous carbon as a cathode for a high-energy lithium ion capacitor[J]. ACS applied materials & interfaces,2018,10(50):43946-43952.
|
[32] |
金钊. 萘沥青-C9树脂共热聚调制改性中间相沥青及其炭材料[D]. 2020, 武汉科技大学.
Jin Z. Preparation of modified mesophase pitch byco-thermopolymerization of naphthalenepitch&C9 resinand its derived carbon materials[D]. 2020, WuhanUniversity of Science and Technology.
|
[33] |
刘丙杨. 童亭煤密中质组制备针状焦研究 [M]. 2021, 中国矿业大学.
Liu B Y. Preparation of Needle Coke By Dense Medium Component from Tongting Coal[M]. 2021, China University of Mining and Technology.
|
[34] |
王玉伟. 煤沥青基钠离子电池负极材料制备与性能研究 [D]. 2018, 大连理工大学.
Wang Y W. Synthesis and electrochemical properties of coal tar pitch-based anode materials for sodium-ion Batteries [D]. 2018, Dalian University of Technology.
|
[35] |
Muhammed F, Lavaggi T, Advani S, et al. Influence of material and process parameters on microstructure evolution during the fabrication of carbon–carbon composites: a review[J]. Journal of Materials Science,2021,56(32):17877-17914. doi: 10.1007/s10853-021-06401-3
|
[36] |
马媛媛, 杨禹, 吕春祥, 等. 氧化石墨烯和石墨相氮化碳增强炭/酚醛复合材料界面热烧蚀性能对比[J]. 新型炭材料,2019,34(1):29-37. doi: 10.19869/j.ncm.1007-8827.2019.01.003
MA Y Y, YANG Y, YU C X, etc. A comparative study of the ablation properties of carbon fiber-reinforced phenolic resin composites with a matrix modified with graphene oxide and graphitic carbon nitride[J]. New Carbon Materials,2019,34(1):29-37. doi: 10.19869/j.ncm.1007-8827.2019.01.003
|
[37] |
查庆芳, 郭燕生, 张玉贞, 等. 沥青树脂和炭纤维的复合性能[J]. 新型炭材料,2007,22(2):109-114.
Cha Q F, Guo Y S, Zhang Y Z, etc. Composite properties of pitch resin and carbon fiber[J]. New Carbon Materials,2007,22(2):109-114.
|
[38] |
邓海亮, 郑金煌, 曹军宁, 等. 稀土镧催化热解二甲苯制备炭/炭复合材料的烧蚀与氧化性能[J]. 新型炭材料,2018,33(5):434-441. doi: 10.19869/j.ncm.1007-8827.2018.05.003
Deng H L, Zheng J H, Chao J N, etc. Ablation and Oxidation resistance properties of C/C composites densified by xylene pyrocarbon using LaCl3 as a catalyst and resin carbon[J]. New Carbon Materials,2018,33(5):434-441. doi: 10.19869/j.ncm.1007-8827.2018.05.003
|
[39] |
Irisawa T, Nishimura K, Yamamoto T, et al. Stress graphitization behavior of C/C composites fabricated from milled short pitch-based carbon fibers and their electrical properties[J]. Journal of Fiber Science and Technology,2012,77(11):296-304.
|
[40] |
Liu X, Deng H, Zheng J, et al. Mechanical and thermal conduction properties of carbon/carbon composites with different carbon matrix microstructures[J]. New Carbon Materials,2020,35(5):576-584. doi: 10.1016/S1872-5805(20)60511-X
|
[41] |
Dong Y, Lin H, Zhou D, et al. Synthesis of mesoporous graphitic carbon fibers with high performance for supercapacitor[J]. Electrochimica Acta,2015,159:116-123. doi: 10.1016/j.electacta.2015.01.152
|
[42] |
Tian Y, Song Y, Tang Z H, et al. Influence of high temperature treatment of porous carbon on the electrochemical performance in supercapacitor[J]. Journal of Power Sources,2008:675-681.
|
[43] |
Yang Y, Zhang F, Wei K Y, et al. Porous carbon microspheres with controlled porosity and graphitization degree for high-performance supercapacitor[J]. Journal of Electroanalytical Chemistry,2022:1572-6657.
|
[44] |
Chang B, Yang B, Guo Y, et al. Preparation and enhanced supercapacitance performance of porous carbon spheres with a high degree of graphitization[J]. Rsc Advances,2014,5(3):2088-2095.
|
[45] |
Xu H. Thermal conversion of an anion-exchange resin: a new catalytic-graphitization route to prepare porous carbons with a high graphitization degree for supercapacitors[J]. Rsc Advances, 2016, 6(113).
|
[46] |
Pang X, Zhou T, Jiang Q T, et al. Porous graphitic carbon fibers for fast-charging supercapacitor applications[J]. Energy Technol, 2020.
|
[47] |
Zhang H, Zhang W, Huang F. Graphene inducing graphitization: Towards a hard carbon anode with ultrahigh initial coulombic efficiency for sodium storage[J]. Chemical Engineering Journal,2022,434:134503. doi: 10.1016/j.cej.2022.134503
|
[48] |
Song D P, Li W, Park J, et al. Millisecond photothermal carbonization for in-situ fabrication of mesoporous graphitic carbon nanocomposite electrode films[J]. Carbon,2020,174:439-444.
|
[49] |
Shi W, Zhang Y, Tian Z Q, et al. Low temperature synthesis of polyhedral hollow porous carbon with high rate capability and long-term cycling stability as Li-ion and Na-ion battery anode material[J]. Journal of power sources,2018,398(SEP.15):149-158.
|
[50] |
Xi Y, Wang Y, Yang D, et al. K2CO3 activation enhancing the graphitization of porous lignin carbon derived from enzymatic hydrolysis lignin for high performance lithium-ion storage[J]. Journal of Alloys and Compounds, 2019.
|
[51] |
Jin Z, Cui Z, Long X, et al. Understanding the correlation between microstructure and electrochemical performance of hybridized pitch cokes for lithium-ion battery through tailoring their evolutional structures from ordered soft carbon to disordered hard carbon[J]. Journal of Alloys and Compounds,2021,887:161357. doi: 10.1016/j.jallcom.2021.161357
|