Citation: | TIAN Qing-qing, LI Xiao-ming, XIE Li-jing, SU Fang-yuan, YI Zong-lin, DONG Liang, CHEN Cheng-meng. Insights into the carbonization mechanism of bituminous coal-derived carbon materials for lithium-ion and sodium-ion batteries. New Carbon Mater., 2023, 38(5): 939-953. doi: 10.1016/S1872-5805(23)60759-0 |
[1] |
Xing B L, Zeng H H, Huang G X, et al. Porous graphene prepared from anthracite as high performance anode materials for lithium-ion battery applications[J]. Journal of Alloys and Compounds,2019,779:202-211. doi: 10.1016/j.jallcom.2018.11.288
|
[2] |
Gao S J, Liu W F, Fu D J, et al. Research progress on recovering the components of spent Li-ion batteries[J]. New Carbon Materials,2022,37(3):435-460. doi: 10.1016/S1872–5805(22)60605–X
|
[3] |
Slater M D, Kim D H, Lee E, et al. Sodium-ion batteries[J]. Advanced Functional Materials,2013,23:947-958. doi: 10.1002/adfm.201200691
|
[4] |
Scrosati B, Garche J. Lithium batteries: Status, prospects and future[J]. Journal of Power Sources,2010,195:2419-2430. doi: 10.1016/j.jpowsour.2009.11.048
|
[5] |
Xie L J, Tang C, Bi Z H, et al. Hard carbon anodes for next-generation Li-ion batteries: Review and perspective[J]. Advanced Energy Materials,2021,11(38):2101650. doi: 10.1002/aenm.202101650
|
[6] |
Udod I A. Sodium-graphite intercalation compound of the first stage: Two-dimensional structure and stability[J]. Synthetic Metals,1997,88(2):127-131. doi: 10.1016/S0379–6779(97)80890–9
|
[7] |
Stevens D A, Dahn J R. The mechanisms of lithium and sodium insertion in carbon materials[J]. Journal of the Electrochemical Society,2001,148(48):803-811. doi: 10.1149/1.1379565
|
[8] |
Yuan Y, Chen Z W, Yu H X, et al. Heteroatom-doped carbon-based materials for lithium and sodium ion batteries[J]. Energy Storage Materials,2020,32:65-90. doi: 10.1016/j.ensm.2020.07.027
|
[9] |
Ding J, Wang H L, Li Z, et al. Carbon nanosheet frameworks derived from peat moss as high performance sodium ion battery anodes[J]. ACS Nano,2013,7(12):11004-11015. doi: 10.1021/nn404640c
|
[10] |
Cheng J Y, Yi Z L, Wang Z B, et al. Towards optimized Li-ion storage performance: Insight on the oxygen species evolution of hard carbon by H2 reduction[J]. Electrochimica Acta,2020,337(20):135736. doi: 10.1016/j.electacta.2020.135736
|
[11] |
Yu J L, Tahmasebi A, Han Y N, et al. A review on water in low rank coals: The existence, interaction with coal structure and effects on coal utilization[J]. Fuel Processing Technology,2013,106:9-20. doi: 10.1016/j.fuproc.2012.09.051
|
[12] |
Peng Z F, Ning X J, Wang G W, et al. Structural characteristics and flammability of low-order coal pyrolysis semi-coke[J]. Journal of the Energy Institute,2020,93(4):1341-1353. doi: 10.1016/j.joei.2019.12.004
|
[13] |
Shi M, Song C L, Tai Z G, et al. Coal-derived synthetic graphite with high specific capacity and excellent cyclic stability as anode material for lithium-ion batteries[J]. Fuel,2021,292:120250. doi: 10.1016/j.fuel.2021.120250
|
[14] |
Xing B L, Zhang C T, Cao Y J, et al. Preparation of synthetic graphite from bituminous coal as anode materials for high performance lithium-ion batteries[J]. Fuel Processing Technology,2018,172:162-171. doi: 10.1016/j.fuproc.2017.12.018
|
[15] |
Ehrburger P, Addoun A, Addoun F, et al. Carbonization of coals in the presence of alkaline hydroxides and carbonates: Formation of activated carbons[J]. Fuel,1986,65(10):1447-1449. doi: 10.1016/0016–2361(86)90121–3
|
[16] |
Hsu L Y, Teng H S. Influence of different chemical reagents on the preparation of activated carbons from bituminous coal[J]. Fuel Processing Technology,2000,64(1):155-166. doi: 10.1016/S0378–3820(00)00071–0
|
[17] |
Zhao H Y, Wang L X, Jia D Z, et al. Coal based activated carbon nanofibers prepared by electrospinning[J]. Journal of Materials Chemistry A,2014,2(24):9338-9344. doi: 10.1039/C4TA00069B
|
[18] |
Gao F, Qu J Y, Zhao Z B, et al. A green strategy for the synthesis of graphene supported Mn3O4 nanocomposites from graphitized coal and their supercapacitor application[J]. Carbon,2014,80:640-650. doi: 10.1016/j.carbon.2014.09.008
|
[19] |
Zhang T K, Wang Q, Li G Q, et al. Formation of carbon nanotubes from potassium catalyzed pyrolysis of bituminous coal[J]. Fuel,2019,239:230-238. doi: 10.1016/j.fuel.2018.11.010
|
[20] |
Moothi K, Lyuke S E, Meyyappan M, et al. Coal as a carbon source for carbon nanotube synthesis[J]. Carbon,2012,50(8):2679-2690. doi: 10.1016/j.carbon.2012.02.048
|
[21] |
Sun W J, Wang N, Chu W, et al. The role of volatiles and coal structural variation in coal methane adsorption[J]. Science Bulletin,2015,60(5):532-540. doi: 10.1007/s11434–015–0747–6
|
[22] |
Porada S. The reactions of formation of selected gas products during coal pyrolysis[J]. Fuel,2004,83(9):1191-1196. doi: 10.1016/j.fuel.2003.11.007
|
[23] |
Li J, Cao Y L, Wang L X, et al. Cost-effective synthesis of bamboo-structure carbon nanotubes from coal for reversible lithium storage[J]. RSC Advances,2017,7:34770-34775. doi: 10.1039/C7RA04047D
|
[24] |
He X J, Zhang H B, Zhang H, et al. Direct synthesis of 3D hollow porous graphene balls from coal tar pitch for high performance supercapacitors[J]. Journal of Materials Chemistry A,2014,2(46):19633-19640. doi: 10.1039/C4TA03323J
|
[25] |
Zhao X J, Jia W, Wu X Y, et al. Ultrafine MoO3 anchored in coal-based carbon nanofibers as anode for advanced lithium-ion batteries[J]. Carbon,2020,156:445-452. doi: 10.1016/j.carbon.2019.09.065
|
[26] |
Li M Y, Tsai W Y, Thapaliya B P, et al. Modified coal char materials with high rate performance for battery applications[J]. Carbon,2021,172:414-421. doi: 10.1016/j.carbon.2020.10.035
|
[27] |
Wang K F, Sun F, Wang H, et al. Altering thermal transformation pathway to create closed pores in coal-derived hard carbon and boosting of Na+ plateau storage for high-performance sodium-ion battery and sodium-ion capacitor[J]. Advanced Functional Materials,2022,32(34):2203725. doi: 10.1002/adfm.202203725
|
[28] |
Wang Y H, Yang W, Yan F Z, et al. Study on coal molecular structure characteristics on methane adsorption performance under pyrolysis treatment[J]. Fuel,2022,328:125228. doi: 10.1016/j.fuel.2022.125228
|
[29] |
Yang W, Wang Y H, Yan F Z, et al. Evolution characteristics of coal microstructure and its influence on methane adsorption capacity under high temperature pyrolysis[J]. Energy,2020,254:124262. doi: 10.1016/j.energy.2022.124262
|
[30] |
Hu J H, Chen Y Q, Qian K Z, et al. Evolution of char structure during mengdong coal pyrolysis: Influence of temperature and K2CO3[J]. Fuel Processing Technology,2017,159:178-186. doi: 10.1016/j.fuproc.2017.01.042
|
[31] |
Li Y, Wang Z H, Huang Z Y, et al. Effect of pyrolysis temperature on lignite char properties and slurrying ability[J]. Fuel Processing Technology,2015,134:52-58. doi: 10.1016/j.fuproc.2015.01.007
|
[32] |
Chen Y Y, Mastalerz M, Schimmelmann A. Characterization of chemical functional groups in macerals across different coal ranks via micro-FTIR spectroscopy[J]. International Journal of Coal Geology,2012,104:22-33. doi: 10.1016/j.coal.2012.09.001
|
[33] |
Zhang K, Li Y, Wang Z H, et al. Pyrolysis behavior of a typical Chinese sub-bituminous Zhundong coal from moderate to high temperatures[J]. Fuel,2016,185:701-708. doi: 10.1016/j.fuel.2016.08.038
|
[34] |
Qi Y R, Lu Y X, Ding F X, et al. Slope-dominated carbon anode with high specific capacity and superior rate capability for high safety Na-ion batteries[J]. Angewandte Chemie, International Edition,2019,58(13):4361-4365. doi: 10.1002/anie.201900005
|
[35] |
Song M X, Yi Z L, Xu R, et al. Towards enhanced sodium storage of hard carbon anodes: Regulating the oxygen content in precursor by low-temperature hydrogen reduction[J]. Energy Storage Materials,2022,51:620-629. doi: 10.1016/j.ensm.2022.07.005
|
[36] |
Li Z Q, Lu C J, Xia Z P, et al. X-ray diffraction patterns of graphite and turbostratic carbon[J]. Carbon,2007,45(8):1686-1695. doi: 10.1016/j.carbon.2007.03.038
|
[37] |
Zheng T, Xing W, Dahn J R. Carbons prepared from coals for anodes of lithium-ion cells[J]. Carbon,1996,34(12):1501-1507. doi: 10.1016/S0008–6223(96)00098–X
|
[38] |
Dahn J R, Xing W, Gao Y. The “falling cards model” for the structure of microporous carbons[J]. Carbon,1997,35(6):825-830. doi: 10.1016/S0008–6223(97)00037–7
|
[39] |
Sadezky A, Muckenhuber H, Grothe H, et al. Raman microspectroscopy of soot and related carbonaceous materials: Spectral analysis and structural information[J]. Carbon,2005,43(8):1731-1742. doi: 10.1016/j.carbon.2005.02.018
|
[40] |
Meng D X, Yue C Y, Wang T, et al. Evolution of carbon structure and functional group during Shenmu lump coal pyrolysis[J]. Fuel,2021,287:119538. doi: 10.1016/j.fuel.2020.119538
|
[41] |
Xu R S, Zhang J L, Wang G W, et al. Isothermal kinetic analysis on fast pyrolysis of lump coal used in COREX process[J]. Journal of Thermal Analysis and Calorimetry,2016,123:773-783. doi: 10.1007/s10973–015–4972–7
|
[42] |
Liang D C, Xie Q, Wan C R, et al. Evolution of structural and surface chemistry during pyrolysis of Zhundong coal in an entrained-flow bed reactor[J]. Journal of Analytical and Applied Pyrolysis,2019,140:331-338. doi: 10.1016/j.jaap.2019.04.010
|
[43] |
Chen Y X, Xi B J, Huang M, et al. Defect-selectivity and “order-in-disorder” engineering in carbon for durable and fast potassium storage[J]. Advanced Materials,2022,34(7):2108621. doi: 10.1002/adma.202108621
|
[44] |
Li X J, Hayashi J I, Li C Z. FT-Raman spectroscopic study of the evolution of char structure during the pyrolysis of a Victorian brown coal[J]. Fuel,2006,85(12-13):1700-1707. doi: 10.1016/j.fuel.2006.03.008
|
[45] |
Chen M, Yu H W, Chen J H, et al. Effect of purification treatment on adsorption characteristics of carbon nanotubes[J]. Diamond and Related Materials,2007,16(4-7):1110-1115. doi: 10.1016/j.diamond.2006.12.061
|
[46] |
Buiel E R, George A E, Dahn J R. Model of micropore closure in hard carbon prepared from sucrose[J]. Carbon,1999,37:1399-1407. doi: 10.1016/S0008–6223(98)00335–2
|
[47] |
Ji H J, Mao Y N, Su H T. Effects of organic micromolecules in bituminous coal on its microscopic pore characteristics[J]. Fuel,2020,262:116529. doi: 10.1016/j.fuel.2019.116529
|
[48] |
Evanoff K, Magasinski A, Yang J B, et al. Nanosilicon-coated graphene granules as anodes for Li-ion batteries[J]. Advanced Energy Materials,2011,1(4):495-498. doi: 10.1002/aenm.201100071
|
[49] |
Sun Z F, Chen Y X, Xi B J, et al. Edge-oxidation-induced densification towards hybrid bulk carbon for low-voltage, reversible and fast potassium storage[J]. Energy Storage Materials,2022,53:482-491. doi: 10.1016/j.ensm.2022.09.031
|
[50] |
Liu Y, Dai H D, Wu L, et al. A large scalable and low-cost sulfur/nitrogen dual-doped hard carbon as the negative electrode material for high-performance potassium-ion batteries[J]. Advanced Energy Materials,2019,9(34):1901379. doi: 10.1002/aenm.201901379
|
[51] |
Ruan J F, Zhao Y H, Luo S N, et al. Fast and stable potassium-ion storage achieved by in situ molecular self-assembling N/O dual-doped carbon network[J]. Energy Storage Materials,2019,23:46-54. doi: 10.1016/j.ensm.2019.05.037
|
[52] |
Cao B, Liu H, Xu B, et al. Mesoporous soft carbon as an anode material for sodium ion batteries with superior rate and cycling performance[J]. Journal of Materials Chemistry A,2016,4(17):6472-6478. doi: 10.1039/C6TA00950F
|
[53] |
Sun N, Guan Z R X, Liu Y W, et al. Extended “adsorption-insertion” model: a new insight into the sodium storage mechanism of hard carbons[J]. Advanced Energy Materials,2019,9(32):1901351. doi: 10.1002/aenm.201901351
|
[54] |
Jin Y, Sun S X, Ou M Y, et al. High-performance hard carbon anode: tunable local structures and sodium storage mechanism[J]. ACS Applied Energy Materials,2018,1(5):2295-2305. doi: 10.1021/acsaem.8b00354
|
20230511supportting imformation.pdf |