SU Jun-ming, ZHOU Shao-jian, LI Rui-zhen, XIAO Zhi-chao, CUI Hong. A review of carbon-carbon composites for engineering applications. New Carbon Mater., 2015, 30(2): 106-114.
Citation: SU Jun-ming, ZHOU Shao-jian, LI Rui-zhen, XIAO Zhi-chao, CUI Hong. A review of carbon-carbon composites for engineering applications. New Carbon Mater., 2015, 30(2): 106-114.

A review of carbon-carbon composites for engineering applications

Funds:  National Science-technology Support Plan Project (2011BAE03B00).
  • Received Date: 2014-11-10
  • Accepted Date: 2015-05-04
  • Rev Recd Date: 2015-02-01
  • Publish Date: 2015-04-28
  • Five kinds of carbon-carbon composites used in aerospace, aircraft, photovoltaics, powder metallurgy and high temperature furnaces are reviewed, whose preforms were fabricated by needle piercing, orthogonal three-direction weaving, radial weaving, axial weaving and puncture. The physical, mechanical, thermal, ablation, and wear properties and service life were compared with corresponding materials from overseas manufacturers. Correlations between the performance, type of preform and carbon matrix, and interfacial bonding state was obtained. These analyses and comparisons can lay a foundation for the construction of a database-sharing platform for C/C composites in engineering applications. Research efforts need to be focused on the fine structure and gradient design of preforms and the optimum combination of different carbon matrices for the improvement of C/C composites.
  • loading
  • 苏君明, C/C喉衬材料的研究与发展
    [J]. 炭素科技, 2001, 11(1): 1-6. (SU Jun-ming, The research and development of the carbon-carbon throat materrials
    [J], Carbon Techniques, 2001, 11(1): 1-6.)
    M Montaudon, F Christin, J J Novoltex. Textures for thermostructural material
    [R]. AIAA: 91-1848.
    Russell A Ellis. Testing of novoltex 3D carbon-carbon interal throat and cones(ITECs)
    [R]. AIAA: 88-3361.
    Bernard H Broquere. Carbon/carbon nozzle exit cones sep's experience and new developments
    [R]. AIAA: 97-2674.
    Alain Lacomb, Et al. 3D NovoltexR and NexecoR carbon-carbon nozzle extensions; matured, industrial and available technologies to reduce programmatic and technical risks and to increase performance of launcher upper stage engines
    [R]. AIAA2008-5236.
    M Bussiere, M Prel. Ariane v solid rocket booster nozzle development status
    [R]. AIAA: 94-3063.
    Michel Berboys. Snecma propulsion solide advanced technology SRM nozzles history and future
    [R]. AIAA: 2006-4596.
    Alain Lacomb, Thierry Pichon, Marc Lacoste. High temperature composite nozzle extensions,a mature and efficient technology to improve upper stage liquid rocket engine performance
    [R]. AIAA: 2007-5470.
    李瑞珍, 胡秦妹, 李 晋, 等. C/C镜筒复合材料的性能研究
    [J], 炭素, 2011(2): 19-21. (LI Rui-zhen, HU Qin-mei, LI Jin, et al. Properties of C/C camera cylinder composites
    [J]. Carbon(Chinese), 2011(2): 19-21.)
    M A Maistre. Development of a 4D reinforced Carbon-carbon composite
    [R]. AIAA: 76-607.
    P Lamicq. Recent Improvement in 4D carbon-carbon material
    [R]. AIAA: 77-822.
    Michel Berdoyes. Thrust vector control by injection of hot gas bled from the chamber hot gas value
    [R]. AIAA: 89-2867.
    Canfield A R. Braided carbon/carbon nozzle development
    [R]. AIAA: 85-1096.
    G C Lamere. MX first stage nozzle development
    [C]. AO/A103844.
    李崇俊, 侯锋辉, 门海泉, 等, 日本的炭/炭复合材料研究概述
    [J]. 炭素, 2013(1): 8-14(39). (LI Chong-jun, HOU Feng-hui, MEN Hai-quan, et al. Research and development of carbon-carbon composite in japan
    [J]. Carbon (Chinese), 2013(1): 8-14(39).)
    缪云良. 一种可针刺无纺织物及准三维预制体
    [P]. 中国发明专利, CN1408920A, 2003. 04. 09. (MIAO Yun-liang. A kind of needle no weave fabric and approximate three dimensional preform. China patent, CN1408920A
    [P]. 2003. 04. 09.)
    苏君明, 崔 红, 苏哲安, 等. 轴棒法混编4D炭/炭复合材料喉衬研究
    [J]. 炭素, 2004,(1): 12-16. (SU Jun-ming, CUI Hong, SU Zhe-an, et al. Research of 4D C/C composite material throat insert by mixed weaved with carbon fibre and axial carbon rod
    [J]. Carbon(Chinese), 2004,(1): 12-16.)
    C F Baker, D R Dunn, E R Mills. Low cost, low erosion throat material for solid rocket motors
    [R]. AIAA: 94-3187.
    HOU Xiao, CHENG Wen, CHEN Ni. Preparation of a high performance carbon-carbon composite throat insert woven with axial carbon rods
    [J]. New Carobn Materials, 2013, 28(5): 355-362.
    Fitzer E, Manocha L M. Carbon reinforcements and carbon/carbon composites
    [M]. Vertag: Springer, 1998.
    Bianchi D, Martelli E, Nasuti F. Coupled analysis of flow and surface ablation in carbon-carbon rocket nozzles
    [J]. Materials of Aerospace Propulsion, 2011, 2(4): 13-24.
    苏君明, 邵海成, 肖志超, 等. 低烧蚀率针刺炭纤维炭/炭复合材料喉衬的制备与性能研究
    [J]. 炭素技术, 2013, 32(6): A1-A5. (SU Jun-ming,SHAO Hai-cheng, XIAO Zhi-chao. Preparation and properties of needling carbon-carbon composites throat with low ablation rate
    [J]. Carbon Techniques, 2013, 32(6): A1-A5.)
    周绍建, 苏君明, 苏哲安, 等. 树脂炭含量对C/C复合材料性能的影响
    [J]. 新型炭材料, 2001, 16(1): 49-52. (ZHOU Shao-jian, SU Jun-ming, SU Zhe-an, et al. The influences of glassy carbon content on the properties of C/C composite
    [J]. New Carobn Materials, 2001, 16(1): 49-52.)
    冉红星, 崔 红, 郝志彪, 等. 炭基体结构状态对C/C复合材料抗烧蚀性能的影响
    [J]. 炭素, 2002,(4): 20-25. (RAN Hong-xing, CUI Hong, HAO Zhi-biao, et al. Influence of carbon-matrix structure on antiablative performances of C/C composites
    [J]. Carbon(Chinese), 2002,(4): 20-25.)
    苏君明, 杨 军, 肖志超, 等. C/C复合材料飞机刹车盘的结构与性能
    [J]. 新型炭材料, 2006, 21(1): 81-88. (SU Jun-ming, YANG Jun, XIAO Zhi-chao, et al. Structure and properties of carbon-carbon composite materials for aircraft brake discs
    [J]. New Carobn Materials, 2006, 21(1): 81-88.)
    SU Jun-ming, XIAO Zhi-chao, LIU Yong-qiong. Preparation and characterization of carbon-carbon aircraft brake materials with long service life and good frictional properties
    [J]. New Carobn Materials, 2010, 25(5): 329-334.
    肖志超, 陈青华, 金志浩, 等. 热处理温度对碳纤维增强碳复合材料摩擦学性能的影响
    [J]. 硅酸盐学报, 2008, 36(8)1153-1158. (XIAO Zhi-chao, CHEN Qing-hua, JIN Zhi-hao, et al. Effect of heat treatment tempreture on the tribological properties of carbon fiber reinforced carbon composites
    [J]. Journal of the Chinese Ceramic Society, 2008, 36(8): 1153-1158.)
    苏君明, 肖志超, 刘勇琼, 等. 制动速度与压力对飞机炭刹车盘摩擦磨损性能的影响
    [J]. 粉末冶金材料与工程, 2011, 16(2): 212-217. (SU Jun-ming, XIAO Zhi-chao, LIU Yong-qiong, et al. Effect of braking velocity and pressure on aircraft brake discs' friction and wear properties
    [J]. Materials Science and Engineering of Powder Metallurgy, 2011, 16(2): 212-217.)
    苏君明, 季光明, 李国峰, 等. 影响飞机炭刹车盘使用寿命的因素研究
    [J]. 炭素, 2011,(4): 7-11. (SU Jun-ming, JI Guang-ming, LI Guo-feng, et al. Research on service life of the aircraft carbon brake disks
    [J]. Carbon(Chinese), 2011,(4): 7-11.)
    彭志刚, 李永军, 苏君明, 等. 高纯炭/炭热场材料研究
    [J]. 固体火箭技术, 2007, 30(增刊): 136-138. (PENG Zhi-gang, LI Yong-jun, SU Jun-ming, et al. Study on high purity C/C thermal field composite
    [J]. Journal of Solid Rocket Technology, 2007, 30(supplement): 136-138.)
    苏君明, 李永军, 肖志超, 等. 炭/炭U型加热器的制备与性能
    [J]. 炭素, 2011,(1): 21-24(38). (SU Jun-ming, LI Yong-jun, XIAO Zhi-chao, et al. Preparation and properties of carbon-carbon composite heater with U shape
    [J]. Carbon (Chinese), 2011,(1): 21-24(38).)
    李贺军, 曾燮榕, 李克智, 等. 炭/炭复合材料研究应用现状及思考
    [J]. 炭素技术, 2001(5): 24-27. (LI He-jun, ZENG Xie-rong, LI Ke-zhi, et al. Some considerations in the R&D of carbon-carbon composites
    [J]. Carbon Techniques, 2001(5): 24-27.)
    刘海平, 田广来, 张立同, 等. "三明治"C/C复合材料及其摩擦磨损性能
    [J]. 炭素技术, 2012, 31(3): A19-A22. (LIU Hai-ping, TIAN Guang-lai, ZHANG Li-tong, et al. Carbon-carbon composites with sandwich structure and their friction wear properties
    [J]. Carbon Techniques, 2012, 31(3): A19-A22.)
    梅 辉, 陈 曦, 邓晓东, 等. 三维针刺C/SiC密度梯度板的无损检测与评价
    [J]. 复合材料学报, 2010, 27(6): 106-112. (MEI Hui, CHEN Xi, DENG Xiao-dong, et al. Non-destructive testing and evaluation of 3D needled C/SiC plate with density gradient
    [J]. Acta Materiae Composiae Sinica, 2010, 27(6): 106-112.)
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article Views(1805) PDF Downloads(1331) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return