Effects of three types of T700 carbon fiber on the mechanical properties of their composites with bismaleimide resin

PENG Gong-qiu; SHI Feng-hui; WANG Ying-fen; LI Guo-li; ZHENG Hong-liang; ZHANG Bao-yan; XIE Fu-yuan

Article Contents

Article Navigation > New Carbon Mater. > 2016 > 31(2): 176-181

PENG Gong-qiu, SHI Feng-hui, WANG Ying-fen, LI Guo-li, ZHENG Hong-liang, ZHANG Bao-yan, XIE Fu-yuan. Effects of three types of T700 carbon fiber on the mechanical properties of their composites with bismaleimide resin. New Carbon Mater., 2016, 31(2): 176-181.

Citation:

PDF( 8233 KB)

Effects of three types of T700 carbon fiber on the mechanical properties of their composites with bismaleimide resin

AVIC Composite Corporation Ltd, Beijing 101300, China

Received Date: 2016-01-10
Accepted Date: 2016-04-21
Rev Recd Date: 2016-03-26
Publish Date: 2016-04-28

Abstract

Abstract

Three types of T700 carbon fibers, A-3K, A-12K and T700SC-12K, were used as reinforcements of carbon fiber/bismaleimide resin composites. The surface roughness and fuzziness of the three fibers, their damage in the preparation of the prepreg and the mechanical properties of the final composites were compared. Results indicate that the surface roughness and fuzziness of A-3K and A-12K produced using a wet-spinning method are larger than that of T700SC-12K from a dry-jet wet-spinning method. The tensile strength retention ratio in the direction parallel to the fiber axis from fibers to composites of T700SC-12K is higher than those of A-3K and A-12K, owing to the smooth surface, best wear resistance and the minimum damage produced during the preparation of the prepreg for the former. The decreasing order of tensile strength in the direction parallel to the fiber axis of the composites is T700SC-12K, A-3K and A-12K. The interfacial bonding for the composites from A-3K and A-12K is much better compared with T700SC-12K because the former two have stronger mechanical anchoring between fibers and resin matrix than the third.
- T700 grade carbon fiber,
- Prepreg,
- Composite,
- Mechanical properties

FullText(HTML)

References(19)

References

Chen J C, Harrison I R. Modification of polyacrylonitrile(PAN) carbon fiber precursor via post-spinning plasticization and stretching in dimethyl formamide(DMF)[J]. Carbon, 2002, 40:25-45.

CAO Chun-xiao. One generation of material technology, one generation of large aircraft[J]. Acta Aeronautica et Astronautica Sinica, 2008, 29(3):701-706.

DU Shan-yi. Advanced composite materials and aerospace engineering[J]. Acta Materiae Compositae Sinica, 2007, 24(1):1-12.

Luo H Y, Roy S, Lu H B. Dynamic compressive behavior of unidirectional IM7/5250-4 laminate after thermal oxidation[J]. Composites Science and Technology, 2012, 72:159-166.

Yao L R, Li M, Wu Q, et al. Comparison of sizing effect of T700 grade carbon fiber on interfacial properties of fiber/BMI and fiber/epoxy[J]. Applied Surface Science, 2012, 263:326-333.

封彤波, 肇研, 罗云烽, 等. 不同上浆剂的国产碳纤维复合材料湿热性能研究[J]. 材料工程, 2009,(10):36-40.(FENG Tong-bo, ZHAO Yan, LUO Yun-feng, et al. Hygrothermal property of CCF/BMI composites with different sizing on the carbon fiber[J]. Journal of Materials Engineering, 2009,(10):36-40.)

Luo Y F, Zhao Y, Duan Y X, et al. Surface and wettability property analysis of CCF300 carbon fibers with different sizing or without sizing[J]. Material and Design, 2011, 32:941-946.

LI Min, Zhang BAO-yan. Study on the hydrothermal properties of a modified bismaleimide resin/carbon fiber composite[J]. Thermosetting Resin, 2006, 5(21):25-27.

张利军, 肇研, 罗云烽, 等. 湿热循环对CCF300/QY8911复合材料界面性能的影响[J]. 材料工程, 2014,(2):25-29.(ZHANG Li-jun, ZHAO Yan, LUO Yun-feng, et al. On the interfacial properties of CCF300/QY8911 composite with cyclinal hygrothermal treatments[J]. Journal of Materials Engineering, 2014,(2):25-29.)

Baklanova N I, Zaitsev B N, Titov A T, et al. The chemistry, morphology, topography of titanium carbide modified carbon fibers[J]. Carbon, 2008, 46:261-271.

Marieta C, Schulz E, Mondragon I. Characterization of interfacial behaviour in carbon-fibre/cyanate composites[J]. Composites Science and Technology, 2002, 62:299-309.

Nishimura I. Sized carbon fiber strand, and prepreg containing the carbon fiber as reinforcing fiber and its molded product[P]. JP Patent:JP10266076, 1998.

曹霞, 温月芳, 张寿春, 等. 耐温型炭纤维乳液上浆剂[J]. 新型炭材料, 2006, 21(4):337-342.(CAO Xia, WEN Yue-fang, ZHANG Shou-chun, et al. A heat resistant emulsifying sizing agent for carbon fiber[J]. New Carbon Materials, 2006, 21(4):337-342.)

李东风, 王浩静, 贺福, 等. T300和T700炭纤维的结构与性能[J]. 新型炭材料, 2007, 22(1):59-64.(LI Dong-feng, WANG Hao-jing, HE fu, et al. Structure and properties of T300 and T700 carbon fibers[J]. New Carbon Materials, 2007, 22(1):59-64.)

张宝艳, 石峰晖, 周正刚, 等. 碳纤维表面分析及双马树脂复合材料界面研究[J]. 武汉理工大学学报, 2009, 31(21):69-72.(ZHANG Bao-yan, SHI Feng-hui, ZHOU Zheng-gang, et al. Surface characteristics of carbon fibers and interfacial properties of carbon fibers reinforced BMI matrix composites[J]. Journal of Wuhan University of Technology, 2009, 31(21):69-72.)

Sun P, Zhao Y, Luo Y F, et al. Effect of temperature and cyclic hygrothermal aging on the interlaminar shear strength of carbon fiber/bismaleimide(BMI) composite[J]. Material & Design, 2011, 32:4341-4347.

Felix N N, Yoshifumi N, Daigo K, et al. Carbon fiber's surface and its effects on an interphase formation for ultimate andhesion-related performance[C]. SAMPE 2012. Baltimore America. MD May 21-May 24.

Dilsiz N, Weightman J P. Surface analysis of unsized and sized carbon fibers[J]. Carbon, 1999; 37:1105-1114.

Donnet J B, Bansal RC. Carbon Fibers[M]. 2^nd end. New York:Marcel Dekker, 1990.

Relative Articles

Supplements(0)

Cited By

Proportional views