Volume 32 Issue 6
. 
Turn off MathJax
Article Contents
Article Navigation >  New Carbon Mater.  > 2017  >  32(6): 481-500
KONG Long, YAN Chong, HUANG Jia-qi. A review of nanocarbon current collectors used in electrochemical energy storage devices. New Carbon Mater., 2017, 32(6): 481-500.
Citation: KONG Long, YAN Chong, HUANG Jia-qi. A review of nanocarbon current collectors used in electrochemical energy storage devices. New Carbon Mater., 2017, 32(6): 481-500.
shu

A review of nanocarbon current collectors used in electrochemical energy storage devices

  • 1.

    Advanced Research Institute of Multidisciplinary Science, Beijing Institute of Technology, Beijing 100081, China;

  • 2.

    Department of Chemical Engineering, Tsinghua University, Beijing 100084, China;

  • 3.

    Key Laboratory of Carbon Materials, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan 030001, China

Funds:  National Key Research and Development Program (2016YFA0202500);Natural Scientific Foundation of China (21776019);Young Elite Scientists Sponsorship Program by CAST (YESS20150133);CAS Key Laboratory of Carbon Materials (KLCMKFJJ1701).
  • Received Date: 2017-09-25
  • Accepted Date: 2017-12-28
  • Rev Recd Date: 2017-11-30
  • Publish Date: 2017-12-28
    Abstract
  • Electrochemical energy storage is critical for the exploration of renewable but occasional use energy sources and for powering electronic devices. Nanocarbon current collectors, such as carbon nanotubes, carbon nanofibers and graphene in both 2D lamellar and 3D network forms, have high specific surface areas, good electrical conductivities, tunable interfacial chemical properties and excellent flexibility, which provide viable platforms for the exploration of lithium-sulfur batteries, lithium ion batteries and supercapacitors. This review focuses on the use of nanocarbon current collectors in electrochemical energy storage devices and probes their interfacial mechanisms. A brief introduction to lithium ion batteries and electrochemical capacitors with high-energy/power-densities enabled by nanocarbon current collectors is also included. Conclusions and perspectives are presented on problems related to the use of nanocarbon current collectors in advanced electrochemical energy storage systems and their solutions.
    • FullText(HTML)
  • loading
    • References(150)
  • Tarascon JM, Armand M. Issues and challenges facing rechargeable lithium batteries[J]. Nature, 2001, 414:359-367.
    Goodenough JB. Energy storage materials:A perspective[J]. Energy Storage Materials, 2015, 1:158-161.
    Buller S, Strunk J. Nanostructure in energy conversion[J]. Journal of Energy Chemistry, 2016, 25:171-190.
    Lv W, Li Z, Deng Y, et al. Graphene-based materials for electrochemical energy storage devices:Opportunities and challenges[J]. Energy Storage Materials, 2016, 2:107-138.
    Zhang XQ, Cheng XB, Zhang Q. Nanostructured energy materials for electrochemical energy conversion and storage:A review[J]. Journal of Energy Chemistry, 2016, 25:967-984.
    Wei L, Karahan HE, Zhai S, et al. Microbe-derived carbon materials for electrical energy storage and conversion[J]. Journal of Energy Chemistry, 2016, 25:191-198.
    Peng HJ, Huang JQ, Zhang Q. A review of flexible lithium-sulfur and analogous alkali metal-chalcogen rechargeable batteries[J]. Chemical Society Reviews, 2017, 46:5237-5288.
    Seh ZW, Sun YM, Zhang QF, et al. Designing high-energy lithium-sulfur batteries[J]. Chemical Society Reviews, 2016, 45:5605-5634.
    Liang J, Sun ZH, Li F, et al. Carbon materials for Li-S batteries:Functional evolution and performance improvement[J]. Energy Storage Materials, 2016, 2:76-106.
    Cheng XB, Zhang R, Zhao CZ, et al. Toward safe lithium metal anode in rechargeable batteries:A review[J]. Chemical Reviews, 2017, 117:10403-10473.
    Lin D, Liu Y, Cui Y. Reviving the lithium metal anode for high-energy batteries[J]. Nature Nanotechnology, 2017, 12:194-206.
    Kong L, Peng HJ, Huang JQ, et al. Review of nanostructured current collectors in lithium-sulfur batteries[J]. Nano Research, 2017, doi: 10.1007/s12274-017-1652-x.
    Iwakura C, Fukumoto Y, Inoue H, et al. Electrochemical characterization of various metal foils as a current collector of positive electrode for rechargeable lithium batteries[J]. Journal of Power Sources, 1997, 68:301-303.
    Portet C, Taberna PL, Simon P, et al. Modification of Al current collector/active material interface for power improvement of electrochemical capacitor electrodes[J]. Journal of the Electrochemical Society, 2006, 153:A649-A653.
    Cho E, Mun J, Chae OB, et al. Corrosion/passivation of aluminum current collector in bis (fluorosulfonyl) imide-based ionic liquid for lithium-ion batteries[J]. Electrochemistry Communications, 2012, 22:1-3.
    Braithwaite JW, Gonzales A, Nagasubramanian G, et al. Corrosion of lithium-ion battery current collectors[J]. Journal of the Electrochemical Society, 1999, 146:448-456.
    Cheng XB, Yan C, Huang JQ, et al. The gap between long lifespan Li-S coin and pouch cells:The importance of lithium metal anode protection[J]. Energy Storage Materials, 2017, 6:18-25.
    Kim SW, Cho KY. Current collectors for flexible lithium ion batteries:A review of materials[J]. Journal of Electrochemical Science and Technology, 2015, 6:1-6.
    Yin YX, Xin S, Guo YG, et al. Lithium-sulfur batteries:Electrochemistry, materials, and prospects[J]. Angewandte Chemie International Edition, 2013, 52:13186-13200.
    Manthiram A, Chung SH, Zu C. Lithium-sulfur batteries:Progress and prospects[J]. Advanced Materials, 2015, 27:1980-2006.
    Fang R, Zhao S, Sun Z, et al. More reliable lithium-sulfur batteries:Status, solutions and prospects[J]. Advanced Materials, 2017, doi: 10.1002/adma.201606823.
    Huang JQ, Zhang Q, Wei F. Multi-functional separator/interlayer system for high-stable lithium-sulfur batteries:Progress and prospects[J]. Energy Storage Materials, 2015, 1:127-145.
    Seh ZW, Li W, Cha JJ, et al. Sulphur-TiO2 yolk-shell nanoarchitecture with internal void space for long-cycle lithium-sulphur batteries[J]. Nature Communications, 2013, 4:1331.
    Yang C, Fu K, Zhang Y, et al. Protected lithium-metal anodes in batteries:From liquid to solid[J]. Advanced Materials, 2017, 29:1701169.
    Chen X, Hou T-Z, Li B, et al. Towards stable lithium-sulfur batteries:Mechanistic insights into electrolyte decomposition on lithium metal anode[J]. Energy Storage Materials, 2017, 8:194-201.
    Cheng XB, Zhang R, Zhao CZ, et al. A review of solid electrolyte interphases on lithium metal anode[J]. Advanced Science, 2015, 3:1500213.
    Yu MP, Li R, Wu MM, et al. Graphene materials for lithium-sulfur batteries[J]. Energy Storage Materials, 2015, 1:51-73.
    Peng HJ, Huang JQ, Cheng XB, et al. Review on high-loading and high-energy Lithium sulfur batteries[J]. Advanced Energy Materials, 2017, 7:1700260.
    张辰, 刘东海, 吕伟, 等. 高体积能量密度锂硫电池的构建:材料和电极[J]. 储能科学与技术, 2017, 6:550-556. (ZHANG Chen, LIU Dong-hai, LV Wei, et al. Construction of Li-S battery with high volumetric performance:Materials and electrode[J]. Energy Storage Science and Technology, 2017, 6:550-556.)
    胡菁菁, 李国然, 高学平. 锂/硫电池的研究现状, 问题及挑战[J]. 无机材料学报, 2013, 28:1181-1186. (HU Jing-jing, LI Guo-ran, GAO Xue-ping. Current status, problems and challenges in lithium-sulfur batteries[J]. Journal of Inorganic Materials, 2013, 28:1181-1186.)
    Shi JL, Tang C, Peng HJ, et al. 3D mesoporous graphene:CVD self-assembly on porous oxide templates and applications in high-stable Li-S batteries[J]. Small, 2015, 11:5243-5252.
    Chung SH, Han P, Chang CH, et al. A shell-shaped carbon architecture with high-loading capability for lithium sulfide cathodes[J]. Advanced Energy Materials, 2017, 7:1700537.
    Peng HJ, Huang JQ, Liu XY, et al. Healing high-loading sulfur electrodes with unprecedented long cycling life:Spatial heterogeneity control[J]. Journal of the American Chemical Society, 2017, 139:8458-8466.
    Kong L, Handa Y, Taniguchi I. Synthesis and characterization of sulfur-carbon-vanadium pentoxide composites for improved electrochemical properties of lithium-sulfur batteries[J]. Materials Research Bulletin, 2016, 73:164-170.
    Kong L, Taniguchi I. Synthesis and characterization of sulfur/carbon/porous nanostructured V2O5 composite cathodes for lithium sulfur batteries[J]. Advanced Powder Technology, 2017, 28:1411-1417.
    Zhou G, Paek E, Hwang GS, et al. Long-life Li/polysulphide batteries with high sulphur loading enabled by lightweight three-dimensional nitrogen/sulphur-codoped graphene sponge[J]. Nature Communications, 2015, 6:7760.
    Li G, Ling M, Ye Y, et al. Acacia Senegal-inspired bifunctional binder for longevity of lithium-sulfur batteries[J]. Advanced Energy Materials, 2015, 5:1500878.
    Milroy C, Manthiram A. An elastic, conductive, electroactive nanocomposite binder for flexible sulfur cathodes in lithium-sulfur batteries[J]. Advanced Materials, 2016, 28:9744-9751.
    Peng HJ, Wang DW, Huang JQ, et al. Janus separator of polypropylene-supported cellular graphene framework for sulfur cathodes with high utilization in lithium-sulfur batteries[J]. Advanced Science, 2016, 3:1500268.
    Huang JQ, Zhang Q, Peng HJ, et al. Ionic shield for polysulfides towards highly-stable lithium-sulfur batteries[J]. Energy & Environmental Science, 2014, 7:347-353.
    Peng HJ, Zhang ZW, Huang JQ, et al. A cooperative interface for highly efficient lithium-sulfur batteries[J]. Advanced Materials, 2016, 28:9551-9558.
    Kong L, Peng HJ, Huang JQ, et al. Beaver-dam-like membrane:A robust and sulphifilic MgBO2(OH)/CNT/PP nest separator in Li-S batteries[J]. Energy Storage Materials, 2017, 8:153-160.
    Su YS, Manthiram A. A new approach to improve cycle performance of rechargeable lithium-sulfur batteries by inserting a free-standing MWCNT interlayer[J]. Chemical Communications, 2012, 48:8817-8819.
    Xiao Z, Yang Z, Wang L, et al. A lightweight TiO2/graphene interlayer, applied as a highly effective polysulfide absorbent for fast, long-life lithium-sulfur batteries[J]. Advanced Materials, 2015, 27:2891-2898.
    Chen S, Dai F, Gordin ML, et al. Functional organosulfide electrolyte promotes an alternate reaction pathway to achieve high performance in lithium-sulfur batteries[J]. Angewandte Chemie International Edition, 2016, 55:4231-4235.
    王丽莉, 叶玉胜, 钱骥, 等. 高比能锂硫电池功能电解质材料[J]. 储能科学与技术, 2017, 6:451-463. (WANG Li-li, YE Yu-sheng, QIAN Ji, LI Li, et al. Functional electrolytes for high specific energy lithium sulfur batteries[J]. Energy Storage Science and Technology, 2017, 6:451-463.)
    Cheng XB, Yan C, Chen X, et al. Implantable solid electrolyte interphase in lithium-metal batteries[J]. Chem, 2017, 2:258-270.
    Zhao CZ, Cheng XB, Zhang R, et al. Li2S5-based ternary-salt electrolyte for robust lithium metal anode[J]. Energy Storage Materials, 2016, 3:77-84.
    Zhai PY, Peng HJ, Cheng XB, et al. Scaled-up fabrication of porous-graphene-modified separators for high-capacity lithium-sulfur batteries[J]. Energy Storage Materials, 2017, 7:56-63.
    Wei Y, Tao Y, Kong Z, et al. Unique electrochemical behavior of heterocyclic selenium-sulfur cathode materials in ether-based electrolytes for rechargeable lithium batteries[J]. Energy Storage Materials, 2016, 5:171-179.
    Zhang M, Yu C, Zhao C, et al. Cobalt-embedded nitrogen-doped hollow carbon nanorods for synergistically immobilizing the discharge products in lithium-sulfur battery[J]. Energy Storage Materials, 2016, 5:223-229.
    Zhang C, Lv W, Tao Y, et al. Towards superior volumetric performance:design and preparation of novel carbon materials for energy storage[J]. Energy & Environmental Science, 2015, 8:1390-1403.
    Yuan Z, Peng HJ, Hou TZ, et al. Powering lithium-sulfur battery performance by propelling polysulfide redox at sulfiphilic hosts[J]. Nano Letters, 2016, 16:519-527.
    Peng HJ, Zhang G, Chen X, et al. Enhanced electrochemical kinetics on conductive polar mediators for lithium-sulfur batteries[J]. Angewandte Chemie International Edition, 2016, 128:13184-13189.
    Tao XY, Wang JG, Liu C, et al. Balancing surface adsorption and diffusion of lithium-polysulfides on nonconductive oxides for lithium-sulfur battery design[J]. Nature Communications, 2016, 7:11203.
    Zhu FL, Yang Z, Zhao JP, et al. Microwave assisted preparation of expanded graphite/sulfur composites as cathodes for Li-S batteries[J]. New Carbon Materials, 2016, 31:199-204.
    Hou TZ, Chen X, Peng HJ, et al. Design principles for heteroatom-doped nanocarbon to achieve strong anchoring of polysulfides for lithium-sulfur batteries[J]. Small, 2016, 12:3283-3291.
    Song J, Gordin ML, Xu T, et al. Strong lithium polysulfide chemisorption on electroactive sites of nitrogen-doped carbon composites for high-performance lithium-sulfur battery cathodes[J]. Angewandte Chemie International Edition, 2015, 54:4325-4329.
    Zhang J, Hu H, Li Z, et al. Double-shelled nanocages with cobalt hydroxide inner shell and layered double hydroxides outer shell as high-efficiency polysulfide mediator for lithium-sulfur batteries[J]. Angewandte Chemie International Edition, 2016, 55:3982-3986.
    Tang C, Zhang Q, Zhao MQ, et al. Nitrogen-doped aligned carbon nanotube/graphene sandwiches:Facile catalytic growth on bifunctional natural catalysts and their applications as scaffolds for high-rate lithium-sulfur batteries[J]. Advanced Materials, 2014, 26:6100-6105.
    Tang ZW, Xu F, Liang YR, et al. Preparation and electrochemical performance of a hierarchically porous activated carbon aerogel/sulfur cathode for lithium-sulfur batteries[J]. New Carbon Materials, 2015, 30:319-326.
    Strubel P, Thieme S, Weller C, et al. Insights into the redistribution of sulfur species during cycling in lithium-sulfur batteries using physisorption methods[J]. Nano Energy, 2017, 34:437-441.
    Zeng F, Wang W, Wang A, et al. Multidimensional polycation β-cyclodextrin polymer as an effective aqueous binder for high sulfur loading cathode in lithium-sulfur batteries[J]. ACS Applied Materials & Interfaces, 2015, 7:26257-26265.
    Zhang R, Li NW, Cheng XB, et al. Advanced micro/nanostructures for lithium metal anodes[J]. Advanced Science, 2017, 4:1600445.
    Fleury V, Chazalviel JN, Rosso M, et al. The role of the anions in the growth speed of fractal electrodeposits[J]. Journal of Electroanalytical Chemistry and Interfacial Electrochemistry, 1990, 290:249-255.
    Zhang R, Cheng XB, Zhao CZ, et al. Conductive nanostructured scaffolds render low local current density to inhibit lithium dendrite growth[J]. Advanced Materials, 2016, 28:2155-2162.
    Zhang R, Chen XR, Chen X, et al. Lithiophilic ites in doped graphene guide uniform lithium nucleation for dendrite-free lithium metal anodes[J]. Angewandte Chemie International Edition, 2017, 56:7764-7768.
    Zhang A, Fang X, Shen C, et al. A carbon nanofiber network for stable lithium metal anodes with high Coulombic efficiency and long cycle life[J]. Nano Research, 2016, 9:3428-3436.
    Zhang XQ, Cheng XB, Chen X, et al. Fluoroethylene carbonate additives to render uniform Li deposits in lithium metal batteries[J]. Advanced Functional Materials, 2017, 27:1605989.
    Yan C, Cheng XB, Zhao CZ, et al. Lithium metal protection through in-situ formed solid electrolyte interphase in lithium-sulfur batteries:The role of polysulfides on lithium anode[J]. Journal of Power Sources, 2016, 327:212-220.
    赵梦, 许睿, 黄佳琦, 等. 锂硫电池中柔性正极的研究进展[J]. 储能科学与技术, 2017, 6:360-379. (ZHAO Meng, XU Rui, HUANG Jia-qi, et al. Flexible cathodes for lithium sulfur battery:A review[J]. Energy Storage Science and Technology, 2017, 6:360-379.)
    Zhai SL, Karahan HE, Wei L, et al. Textile energy storage:Structural design concepts, material selection and future perspectives[J]. Energy Storage Materials, 2016, 3:123-139.
    Lou F, Chen D. Aligned carbon nanostructures based 3D electrodes for energy storage[J]. Journal of Energy Chemistry, 2015, 24:559-586.
    Guo MQ, Huang JQ, Kong XY, et al. Hydrothermal synthesis of porous phosphorus-doped carbon nanotubes and their use in the oxygen reduction reaction and lithium-sulfur batteries[J]. New Carbon Materials, 2016, 31:352-362.
    Li B, Li S, Liu J, et al. Vertically aligned sulfur-graphene nanowalls on substrates for ultrafast lithium-sulfur batteries[J]. Nano Letters, 2015, 15:3073-3079.
    Yuan Z, Peng HJ, Huang JQ, et al. Hierarchical free-standing carbon-nanotube paper electrodes with ultrahigh sulfur-loading for lithium-sulfur batteries[J]. Advanced Functional Materials, 2014, 24:6105-6112.
    Sun L, Li M, Jiang Y, et al. Sulfur nanocrystals confined in carbon nanotube network as a binder-free electrode for high-performance lithium sulfur batteries[J]. Nano Letters, 2014, 14:4044-4049.
    Chen H, Dong W, Ge J, et al. Ultrafine sulfur nanoparticles in conducting polymer shell as cathode materials for high performance lithium/sulfur batteries[J]. Scientific Reports, 2013, 3:1910.
    Myung ST, Hitoshi Y, Sun YK. Electrochemical behavior and passivation of current collectors in lithium-ion batteries[J]. Journal of Materials Chemistry, 2011, 21:9891-9911.
    Peng HJ, Xu WT, Zhu L, et al. 3D carbonaceous current collectors:the origin of enhanced cycling stability for high-sulfur-loading lithium-sulfur batteries[J]. Advanced Functional Materials, 2016, 26:6351-6358.
    Liu X, Huang JQ, Zhang Q, et al. Nanostructured metal oxides and sulfides for lithium-sulfur batteries[J]. Advanced Materials, 2017, 29:1601759.
    Peng HJ, Hou TZ, Zhang Q, et al. Strongly coupled interfaces between a heterogeneous carbon host and a sulfur-containing guest for highly stable lithium-sulfur batteries:mechanistic insight into capacity degradation[J]. Advanced Materials Interfaces, 2014, 1:1400227.
    Hwang JY, Kim HM, Lee SK, et al. High-energy, high-rate, lithium-sulfur batteries:Synergetic effect of hollow TiO2-webbed carbon nanotubes and a dual functional carbon-paper interlayer[J]. Advanced Energy Materials, 2016, 6:1501480.
    Barchasz C, Mesguich F, Dijon J, et al. Novel positive electrode architecture for rechargeable lithium/sulfur batteries[J]. Journal of Power Sources, 2012, 211:19-26.
    Zhou G, Pei S, Li L, et al. A graphene-pure-sulfur sandwich structure for ultrafast, long-life lithium-sulfur batteries[J]. Advanced Materials, 2014, 26:625-631.
    Hu G, Xu C, Sun Z, et al. 3D graphene-foam-reduced-graphene-oxide hybrid nested hierarchical networks for high-performance Li-S batteries[J]. Advanced Materials, 2015, 28:1603-1609.
    Fang R, Zhao S, Hou P, et al. 3D interconnected electrode materials with ultrahigh areal sulfur loading for Li-S batteries[J]. Advanced Materials, 2016:3374-3382.
    Zhao MQ, Zhang Q, Huang JQ, et al. Unstacked double-layer templated graphene for high-rate lithium-sulphur batteries[J]. Nature Communications, 2014, 5:3410.
    Huang JQ, Peng HJ, Liu XY, et al. Flexible all-carbon interlinked nanoarchitectures as cathode scaffolds for high-rate lithium-sulfur batteries[J]. Journal of Materials Chemistry A, 2014, 2:10869-10875.
    Zhu L, Peng HJ, Liang J, et al. Interconnected carbon nanotube/graphene nanosphere scaffolds as free-standing paper electrode for high-rate and ultra-stable lithium-sulfur batteries[J]. Nano Energy, 2015, 11:746-755.
    Ding YL, Kopold P, Hahn K, et al. Facile solid-state growth of 3D well-interconnected nitrogen-rich carbon nanotube-graphene hybrid architectures for lithium-sulfur batteries[J]. Advanced Functional Materials, 2016, 26:1112-1119.
    Huang JQ, Zhang Q, Zhang SM, et al. Aligned sulfur-coated carbon nanotubes with a polyethylene glycol barrier at one end for use as a high efficiency sulfur cathode[J]. Carbon, 2013, 58:99-106.
    Cheng XB, Peng HJ, Huang JQ, et al. Three-dimensional aluminum foam/carbon nanotube scaffolds as long-and short-range electron pathways with improved sulfur loading for high energy density lithium-sulfur batteries[J]. Journal of Power Sources, 2014, 261:264-270.
    Huang JQ, Zhai PY, Peng HJ, et al. Metal/nanocarbon layer current collectors enhanced energy efficiency in lithium-sulfur batteries[J]. Science Bulletin, 2017, 62:1267-1274.
    Fan Q, Liu W, Weng Z, et al. Ternary hybrid material for high-performance lithium-sulfur battery[J]. Journal of the American Chemical Society, 2015, 137:12946-12953.
    Xu GY, Yuan JR, Tao XY, et al. Absorption mechanism of carbon-nanotube paper-titanium dioxide as a multifunctional barrier material for lithium-sulfur batteries[J]. Nano Research, 2015, 8:3066-3074.
    马国强, 温兆银, 王清松, 等. CeO2纳米晶的添加对锂硫电池电化学性能的影响[J]. 无机材料学报, 2015, 30:913-918. (MA Guo-qiang, WEN Zhao-yin, WANG Qing-song, et al. Effects of CeO2 Nano-crystal on electrochemical properties of lithium/sulfur batteries[J]. Journal of Inorganic Materials, 2015, 30:913-918.)
    Lai ZC, Chen Y, Tan CL, et al. Self-assembly of two-dimensional nanosheets into one-dimensional nanostructures[J]. Chem, 2016, 1:59-77.
    Su FY, Xie LJ, Sun GH, et al. Theoretical research progress on the use of graphene in different electrochemical processes[J]. New Carbon Materials, 2016, 31:363-377.
    Sun Y, Zheng G, Seh ZW, et al. Graphite-encapsulated Li-metal hybrid anodes for high-capacity Li batteries[J]. Chem, 2016, 1:287-297.
    Zuo TT, Wu XW, Yang CP, et al. Graphitized carbon fibers as multifunctional 3D current collectors for high areal capacity Li anodes[J]. Advanced Materials, 2017, 29:1700389.
    Ye H, Xin S, Yin YX, et al. Stable Li plating/stripping electrochemistry realized by a hybrid Li reservoir in spherical carbon granules with 3D conducting skeletons[J]. Journal of the American Chemical Society, 2017, 139:5916-5922.
    Ji XL, Liu DY, Prendiville DG, et al. Spatially heterogeneous carbon-fiber papers as surface dendrite-free current collectors for lithium deposition[J]. Nano Today, 2012, 7:10-20.
    Cheng XB, Hou TZ, Zhang R, et al. Dendrite-free lithium deposition induced by uniformly distributed lithium-ions for efficient lithium metal batteries[J]. Advanced Materials, 2016, 28:2888-2895.
    Zhang Y, Luo W, Wang C, et al. High-capacity, low-tortuosity, and channel-guided lithium metal anode[J]. Proceedings of the National Academy of Sciences, 2017, 114:3584-3589.
    Kozen AC, Lin CF, Pearse AJ, et al. Next-generation lithium metal anode engineering via atomic layer deposition[J]. ACS Nano, 2015, 9:5884-5892.
    石凯, 安德成, 贺艳兵, 等. 基于聚合物电解质固态锂硫电池的研究进展和发展趋势[J]. 储能科学与技术, 2017, 6:479-492. (SHI Kai, AN De-cheng, HE Yan-bing, et al. Research progress and future trends of solid state lithium-sulfur batteries based on polymer electrolytes[J]. Energy Storage Science and Technology, 2017, 6:479-492.)
    孙滢智, 黄佳琦, 张学强, 等. 基于硫化物固态电解质的固态锂硫电池研究进展[J]. 储能科学与技术, 2017, 6:464-478. (SUN Ying-zhi, HUANG Jia-qi, ZHANG Xue-qiang, et al. Review on solid state lithium-sulfur batteries with sulfide solid electrolytes[J]. Energy Storage Science and Technology, 2017, 6:464-478.)
    Imtiaz S, Zhang J, Zafar ZA, et al. Biomass-derived nanostructured porous carbons for lithium-sulfur batteries[J]. Science China-Materials, 2016, 59:389-407.
    Simone V, Boulineau A, De Geyer A, et al. Hard carbon derived from cellulose as anode for sodium ion batteries:Dependence of electrochemical properties on structure[J]. Journal of Energy Chemistry, 2016, 25:761-768.
    Tu Y, Deng D, Bao X. Nanocarbons and their hybrids as catalysts for non-aqueous lithium-oxygen batteries[J]. Journal of Energy Chemistry, 2016, 25:957-966.
    Li Y, Wang L, He X, et al. Boron-doped Ketjenblack based high performances cathode for rechargeable Li-O2 batteries[J]. Journal of Energy Chemistry, 2016, 25:131-135.
    Tang C, Wang HF, Chen X, et al. Topological defects in metal-free nanocarbon for oxygen electrocatalysis[J]. Advanced Materials, 2016, 28:6845-6851.
    Chen S, Duan JJ, Zheng Y, et al. Ionic liquid-assisted synthesis of N/S-double doped graphene microwires for oxygen evolution and Zn-air batteries[J]. Energy Storage Materials, 2015, 1:17-24.
    Oh JW, Oh RG, Kang YK, et al. Electrochemical performance of all-solid lithium ion batteries with a polyaniline film cathode[J]. Journal of Energy Chemistry, 2016, 25:93-100.
    Chen RJ, Luo R, Huang YX, et al. Advanced high energy density secondary batteries with multi-electron reaction materials[J]. Advanced Science, 2016, 3:1600051.
    Endo M, Kim Y, Hayashi T, et al. Vapor-grown carbon fibers (VGCFs):basic properties and their battery applications[J]. Carbon, 2001, 39:1287-1297.
    Nan D, Huang ZH, Kang FY, et al. Electrospun N-doped porous carbon nanofiber webs as anodes for lithium-ion batteries[J]. New Carbon Materials, 2016, 31:393-398.
    Reddy M, Subba Rao G, Chowdari B. Metal oxides and oxysalts as anode materials for Li ion batteries[J]. Chemical Reviews, 2013, 113:5364-5457.
    Wu ZS, Ren WC, Wen L, et al. Graphene anchored with Co3O4 nanoparticles as anode of lithium ion batteries with enhanced reversible capacity and cyclic performance[J]. ACS Nano, 2010, 4:3187-3194.
    Zhou G, Li L, Zhang Q, et al. Octahedral Co3O4 particles threaded by carbon nanotube arrays as integrated structure anodes for lithium ion batteries[J]. Physical Chemistry Chemical Physics, 2013, 15:5582-5587.
    Jia X, Chen Z, Cui X, et al. Building robust architectures of carbon and metal oxide nanocrystals toward high-performance anodes for lithium-ion batteries[J]. ACS Nano, 2012, 6:9911-9919.
    Wu Y, Wei Y, Wang J, et al. Conformal Fe3O4 sheath on aligned carbon nanotube scaffolds as high-performance anodes for lithium ion batteries[J]. Nano Letters, 2013, 13:818-823.
    Wen W, Zou M, Feng Q, et al. SnO2 nanospheres among GO and SWNTs networks as anode for enhanced lithium storage performances[J]. Journal of Energy Chemistry, 2016, 25:445-449.
    Wei W, Song L-X, Guo L. SnO2 hollow nanospheres assembled by single layer nanocrystals as anode material for high performance Li ion batteries[J]. Chinese Chemical Letters, 2015, 26:124-128.
    Zhang J, Yu A. Nanostructured transition metal oxides as advanced anodes for lithium-ion batteries[J]. Science Bulletin, 2015, 60:823-838.
    Li G, Wu P, Luo C, et al. Mass production of LiFePO4/C energy materials using Fe-P waste slag[J]. Journal of Energy Chemistry, 2015, 24:375-380.
    Liu W, Jiang J, Wang H, et al. Influence of graphene oxide on electrochemical performance of Si anode material for lithium-ion batteries[J]. Journal of Energy Chemistry, 2016, 25:817-824.
    Wu JX, Qin XY, Liang GM, et al. A binder-free web-like silicon-carbon nanofiber-graphene hybrid membrane for use as the anode of a lithium-ion battery[J]. New Carbon Materials, 2016, 31:321-327.
    Xu Y, Ding L, Zhong T, et al. Novel application of LiCoO2 as a high-performance candidate material for supercapacitor[J]. Journal of Energy Chemistry, 2015, 24:193-198.
    Yi TF, Han X, Yang SY, et al. Enhanced electrochemical performance of Li-rich low-Co Li1.2Mn0.56Ni0.16Co0.08-xAlxO2 (0 < x < 0.08) as cathode materials[J]. Science China-Materials, 2016, 59:618-628.
    Ni JF, Zhang L, Fu SD, et al. A review on integrating nano-carbons into polyanion phosphates and silicates for rechargeable lithium batteries[J]. Carbon, 2015, 92:15-25.
    Li Y, Lu XH, Su FY, et al. A graphene/carbon black hybrid material:a novel binary conductive additive for lithium-ion batteries[J]. New Carbon Materials, 2015, 30:128-132.
    Liu XY, Peng HJ, Zhang Q, et al. Hierarchical carbon nanotube/carbon black scaffolds as short-and long-range electron pathways with superior Li-ion storage performance[J]. ACS Sustainable Chemistry & Engineering, 2013, 2:200-206.
    Jia X, Yan C, Chen Z, et al. Direct growth of flexible LiMn2O4/CNT lithium-ion cathodes[J]. Chemical Communications, 2011, 47:9669-9671.
    Jia X, Chen Z, Suwarnasarn A, et al. High-performance flexible lithium-ion electrodes based on robust network architecture[J]. Energy & Environmental Science, 2012, 5:6845-6849.
    Luo S, Wang K, Wang J, et al. Binder-free LiCoO2/carbon nanotube cathodes for high-performance lithium ion batteries[J]. Advanced Materials, 2012, 24:2294-2298.
    Liu C, Tan Y, Liu Y, et al. Microporous carbon nanofibers prepared by combining electrospinning and phase separation methods for supercapacitor[J]. Journal of Energy Chemistry, 2016, 25:587-593.
    Xu G, Zheng C, Zhang Q, et al. Binder-free activated carbon/carbon nanotube paper electrodes for use in supercapacitors[J]. Nano Research, 2011, 4:870-881.
    Gao Y, Zhang Y, Zhang Y, et al. Three-dimensional paper-like graphene framework with highly orientated laminar structure as binder-free supercapacitor electrode[J]. Journal of Energy Chemistry, 2016, 25:49-54.
    Liu YZ, Li YF, Su FY, et al. Easy one-step synthesis of N-doped graphene for supercapacitors[J]. Energy Storage Materials, 2016, 2:69-75.
    Chen CM, Zhang Q, Huang CH, et al. Macroporous ‘bubble’ graphene film via template-directed ordered-assembly for high rate supercapacitors[J]. Chemical Communications, 2012, 48:7149-7151.
    Yu D, Goh K, Wang H, et al. Scalable synthesis of hierarchically structured carbon nanotube-graphene fibres for capacitive energy storage[J]. Nature Nanotechnology, 2014, 9:555-562.
    Hao GP, Zhang Q, Sin M, et al. Design of hierarchically porous carbons with interlinked hydrophilic and hydrophobic surface and their capacitive behavior[J]. Chemistry of Materials, 2016, 28:8715-8725.
    Hu H, Guan BY, Lou XW. Construction of complex CoS hollow structures with enhanced electrochemical properties for hybrid supercapacitors[J]. Chem, 2016, 1:102-113.
    Zhao J, Chen J, Xu S, et al. Hierarchical NiMn layered double hydroxide/carbon nanotubes architecture with superb energy density for flexible supercapacitors[J]. Advanced Functional Materials, 2014, 24:2938-2946.
    Zhou R, Meng C, Zhu F, et al. High-performance supercapacitors using a nanoporous current collector made from super-aligned carbon nanotubes[J]. Nanotechnology, 2010, 21:345701.
    Simon P, Gogotsi Y, Dunn B. Where do batteries end and supercapacitors begin?[J]. Science, 2014, 343:1210-1211.
    Yu G, Xie X, Pan L, et al. Hybrid nanostructured materials for high-performance electrochemical capacitors[J]. Nano Energy, 2013, 2:213-234.
    张熊, 孙现众, 马衍伟. 高比能超级电容器的研究进展[J]. 中国科学:化学, 2014, 44:1081-1096. (ZHANG Xiong, SUN Xian-zhong, MA Yan-wei. Research of supercapacitors with high energy density[J]. SCIENTIA SINICA Chimica, 2014, 44:1081-1096.)
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(1)

    Get Citation
    PDF
    XML

    Article Metrics

    Article Views(743) PDF Downloads(896) Cited by()
    Proportional views
    Related

    Address： 27 Taoyuan South Road, Yingze District, Taiyuan City, Shanxi Province, ChinaPostCode：030001

    Phone/Fax：0351-2025254

    Email： tcl@sxicc.ac.cn

    Copyright © 2021 Editorial Office of New Carbon Materials. All Rights Reserved This system consists of Beijing Renhe Information Technology Co. Ltd   百度统计

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return