A comparative study of the fuzz produced by friction and tension in China T800 and Toray T800H carbon fiber tows

LI Long; PAN Yue-xiu; ZHU Shi-peng; FENG Zhi-hai; YANG Yun-hua; SONG Yi-jun; SONG Huan-yu

Article Contents

Article Navigation > New Carbon Mater. > 2018 > 33(4): 377-384

LI Long, PAN Yue-xiu, ZHU Shi-peng, FENG Zhi-hai, YANG Yun-hua, SONG Yi-jun, SONG Huan-yu. A comparative study of the fuzz produced by friction and tension in China T800 and Toray T800H carbon fiber tows. New Carbon Mater., 2018, 33(4): 377-384.

Citation:

PDF( 3694 KB)

A comparative study of the fuzz produced by friction and tension in China T800 and Toray T800H carbon fiber tows

Science and Technology on Advanced Functional Composites Laboratory, Aerospace Research Institute of Materials & Processing Technology, Beijing 100076, China

Funds: National Natural Science Foundation of China (51702076).

Received Date: 2018-05-20
Accepted Date: 2018-08-30
Rev Recd Date: 2018-07-20
Publish Date: 2018-08-28

Abstract

Abstract

The fuzzes weights in Toray T800H and China T800 carbon fiber tows were investigated under friction by rubbing the fiber tows between a pair of sponges and tension along the fiber tows by stretching. Results show that the fuzzes weights of China T800 are much higher than in Toray T800H. The effect of a compressive load on the sponges and a tensile force on the fiber tows on the fuzzes weights is noticeably different for the two tows. SEM images show that the fuzzes weights of China T800 are more than that in Toray T800H. AFM indicates that the sizing of China T800 is less uniform than that of Toray T800H. Moreover, interweaving of the filaments in China T800 is more apparent than in Toray T800H. These three factors contribute jointly to the larger fuzzes weights and its more obvious increase under both friction and tension for the China T800 than the Toray T800H tows.
- Carbon fiber,
- Fuzz,
- Evaluation,
- Formation mechanism

FullText(HTML)

References(22)

References

李仲平. 防热复合材料发展与展望[J]. 复合材料学报, 2011, 28(2):1-9. (LI Zhong-ping. Major advancement and development trends of TPS composites[J]. Acta Materiae Compositae Sinica, 2011, 28(2):1-9.)

冯志海, 李同起. 炭纤维在烧蚀防热复合材料中的应用[M]. 北京:国防工业出版社, 2016. (FENG Zhi-hai, LI Tong-qi. Application of Carbon Fibers in the Ablative Composites for the Thermal Protection[M]. Beijing:National Defense Industry Press, 2016.)

杨云华, 潘月秀, 冯志海, 等. 宇航级炭纤维评价表征[J]. 新型炭材料, 2014, 29(3):161-168. (YANG Yun-hua, PAN Yue-xiu, FENG Zhi-hai, et al. Evaluation of aerospace carbon fibers[J]. New Carbon Materials, 2014, 29(3):161-168.)

陈祥宝. 先进树脂基复合材料的发展和应用[J]. 航空材料学报, 2003, 23:198-204. (CHEN Xiang-bao. The development and applications of advanced polymer matrix composites[J]. Journal of Aeronautical Materials, 2003, 23:198-204.)

欧阳琴, 陈友汜, 王雪飞, 等. 聚丙烯腈原丝中毛丝的结构与性能研究[J].高科技纤维与应用, 2011, 36(4):12-17. (OUYANG Qin, CHEN You-si, WANG Xue-fei, et al. The structure and properties of fuzz of polyacrylonitrile precursor fiber[J]. Hi-Tech Fiber & Application, 2011, 36(4):12-17.)

任怀居, 贾玉亭, 方静. 聚丙烯腈原丝毛丝形成与控制工艺研究[J]. 高科技纤维与应用, 2014, 39(2):67-75. (REN Huai-ju, JIA Yu-ting, FANG Jing. Research on the formation of fluffs on PAN precursor and their controlling process[J]. Hi-Tech Fiber & Application, 2014, 39(2):67-75.)

颜鸿斌, 安明康, 王健, 等. 炭纤维缝编工艺差异性分析与评估技术[J]. 宇航材料工艺, 2014, (4):68-73. (YAN Hong-bin, AN Ming-kang, WANG Jian, et al. Analysis and assess technology of difference of carbon fiber stitch-bonding process[J]. Aerospace Materials & Technology, 2014, (4):68-73.)

焦亚男, 祁小芬, 吴宁, 等. 上浆量对炭纤维的立体织造损伤及其复合材料拉伸性能的影响[J]. 复合材料学报, 2015, 32(5):1496-1502. (JIAO Ya-nan, QI Xiao-fen, WU Ning, et al. Effects of sizing amount on carbon fiber three-dimensional weaving damage and tensile properties of its composites[J]. Acta Materiae Compositae Sinica, 2015, 32(5):1496-1502.

徐樑华. 国产炭纤维质量状况分析及对策建议[J]. 新材料产业, 2010, 9:6-8. (XU Liang-hua. The quality analysis and development suggestions on domestic carbon fiber[J]. Advanced Materials Industry, 2010, 9:6-8.)

冯志海. 关于我国高性能炭纤维需求和发展的几点想法[J]. 新材料产业, 2010, 9:19-24. (FENG Zhi-hai.Some opinions on requirement and development of domestic high performance carbon fiber[J]. Advanced Materials Industry, 2010, 9:19-24.)

Tiwari S, Bijweb J. Surface treatment of carbon fibers-A review[J]. Procedia Technology, 2014, 14:505-512.

彭公秋, 石峰晖, 王迎芬, 等. T700级炭纤维复合材料性能对比[J]. 新型炭材料, 2016, 31(2):176-181. (PENG Gong-qiu, SHI Feng-hui, WANG Ying-fen, et al. Effects of three types of T700 carbon fiber on the mechanical properties of their composites with bismaleimide resin[J]. New Carbon Materials, 2016, 31(2):176-181.)

吕春祥, 袁淑霞, 李永红, 等. 炭纤维国产化的若干技术瓶颈[J]. 新材料产业, 2011, (2):48-50. (LV Chun-xiang, YUAN Shu-xia, LI Yong-hong, et al. Technical problems in the development of carbon fiber in China[J]. Advanced Materials Industry, 2011, (2):48-50.)

徐樑华.高性能PAN基炭纤维国产化进展及发展趋势[J]. 中国材料进展, 2012, 31(10):8-20. (XU Liang-hua. Development and trends of PAN-based high performance carbon fiber in China[J]. Materials China, 2012, 31(10):8-20.)

夏英伟, 沃西源. 对中国高模量炭纤维应用中工艺性能问题的分析[J]. 航天返回与遥感, 2011, 32(3):83-87. (XIA Ying-wei, WO Xi-yuan. The operation performance analysis on high-module carbon fiber application in China[J]. Spacecraft Recovery & Remote Sensing, 2011, 32(3):83-87.)

石峰晖, 张宝艳, 陈祥宝. 炭纤维丝束起毛量测试装置和测试方法[P], CN102304843B, 2013.06.05.

顾轶卓, 王绍凯, 李敏, 等. 炭纤维起毛量测试装置及测量方法[P], CN105865964A, 2016.08.17.

Nishimura I. Sized carbon fiber strand, and prepreg containing the carbon fiber as reinforcing fiber, and its molded product[P], JP10266076, 1998.10.08.

Mulvihill D, Smerdova O, Sutcliffe M. Friction of carbon fibre tows[J]. Composites:Part A, 2017, 93:185-198.

Mulvihill D, Sutcliffe M. Effect of tool surface topography on friction with carbon fibre tows for composite fabric forming[J]. Composites:Part A, 2017, 93:199-206.

李学锋, 孙媛, 彭少贤, 等.原子力显微镜研究材料光滑表面的微摩擦性能[J]. 功能材料, 2009, 40(2):281-283. (LI Xue-feng, SUN Yuan, PENG Shao-xian, et al. AFM studies of microtribology of lubricity materials surface[J]. Journal of Functional Materials, 2009, 40(2):281-283.)

贺福. 炭纤维及石墨纤维[M]. 北京:化学工业出版社, 2010. (HE Fu. Carbon Fiber and Graphite Fiber[M]. Beijing:Chemistry Industry Press, 2010.)

Relative Articles

Supplements(0)

Cited By

Proportional views