以碳纳米管为模板在熔盐介质中制备碳化钽

崔正威; 李轩科; 丛野; 董志军; 袁观明; 张江

doi:10.1016/S1872-5805(17)60117-3

以碳纳米管为模板在熔盐介质中制备碳化钽

doi: 10.1016/S1872-5805(17)60117-3

崔正威^1,2,
李轩科^1,2,,
丛野¹,
董志军¹,
袁观明¹,
张江¹

1.
武汉科技大学, 省部共建耐火材料与冶金国家重点实验室, 湖北武汉 430081;
2.
武汉科技大学, 煤转化与新型炭材料湖北省重点实验室, 湖北武汉 430081

基金项目: 国家自然科学委面上项目（50972110， 51472186）；湖北省自然基金重点项目（2009CDA036）；教育部留学基金委归国留学人员基金.

详细信息

作者简介:
崔正威,博士研究生.E-mail:farstar@163.com

通讯作者:
李轩科,教授.E-mail:xkli8524@sina.com

中图分类号: TQ127.1⁺1
计量
- 文章访问数: 529
- HTML全文浏览量: 108
- PDF下载量: 526
- 被引次数: 0
出版历程
- 收稿日期: 2017-03-20
- 录用日期: 2017-06-28
- 修回日期: 2017-06-08
- 刊出日期: 2017-06-28

Synthesis of tantalum carbide from multiwall carbon nanotubes in a molten salt medium

1.
The State Key Laboratory of Refractories and Metallurgy, Wuhan University of Science and Technology, Wuhan 430081, China;
2.
The Hubei Province Key Laboratory of Coal Conversion and New Carbon Materials, Wuhan University of Science and Technology, Wuhan 430081, China

Funds: National Natural Science Foundation of China (50972110,51472186);Hubei Provincial Natural Science Foundation of China (2009CDA036);Scientific Research Foundation for the Returned Overseas Chinese Scholars,State Education Ministry.

摘要

摘要: 以不同结构的碳纳米管为反应模板，在KCl-LiCl混合盐体系中，利用熔盐反应成功制备了碳化钽纳米纤维和碳化钽涂层，并对反应产物和相应的碳管模板分别进行了SEM、TEM、XRD和SAED表征。结果表明，碳管的晶体结构对碳化钽涂层的形成具有显著地影响，经高温处理后碳管的晶体结构趋于完整，但反应性变差。通过控制金属钽和碳管的摩尔比可以选择性地得到碳化钽纳米纤维和碳化钽涂层，且产物的形貌与它们的碳管前驱体类似。同时，反应时间和反应温度对碳化钽的形成有较大影响。
- 碳纳米管 /
- 碳化钽 /
- 碳化物涂层
Abstract: Tantalum carbide (TaC) nanofibers and coatings were synthesized using multiwall carbon nanotubes (MWCNTs) with different structures as templates and the carbon source in a KCl-LiCl molten salt mixture (41.2/58.8 mol/mol).The TaC and MWCNTs were characterized by scanning electron microscopy,transmission electron microscopy,X-ray diffraction and selected area electron diffraction.Results indicate that the microstructure of the MWCNTs has a distinct influence on the formation of a TaC coating on the MWCNTs.MWCNTs heat-treated at 2 900℃ have a higher crystallinity and are harder to react with Ta to form TaC than those without the heat-treatment.The formation of TaC nanofibers or TaC coatings on MWCNTs is dependent on the molar ratio of tantalum to carbon nanotubes.The morphology of the polycrystalline cubic TaC nanofibers and the TaC coating is similar to that of MWCNTs.The reaction time and temperature have a great influence on the conversion of carbon to TaC and its crystallite size.
- Carbon nanotubes /
- Tantalum Carbide /
- Carbide coatings

HTML全文

下载: 全尺寸图片幻灯片

参考文献(25)

Service R. Superstrong nanotubes show they are smart, too[J]. Science, 1998, 281(5379):940-942.

Chen X, Xia J, Peng J, et al. Carbon-nanotube metal-matrix composites prepared by electroless plating[J]. Composites Science and Technology, 2000, 60(2):301-306.

Seeger T, Redlich P, Grobert N, et al. SiO_X-coating of carbon nanotubes at room temperature[J]. Chemical physics letters, 2001, 339(1):41-46.

Morisada Y, Miyamoto Y, Takaura Y, et al. Mechanical properties of SiC composites incorporating SiC-coated multi-walled carbon nanotubes[J]. International Journal of Refractory Metals and Hard Materials, 2007, 25(4):322-327.

Wang F, Arai S, Endo M. The preparation of multi-walled carbon nanotubes with a Ni-P coating by an electroless deposition process[J]. Carbon, 2005, 43(8):1716-1721.

Ci L, Ryu Z, Jin-Phillipp N Y, et al. Investigation of the interfacial reaction between multi-walled carbon nanotubes and aluminum[J]. Acta Materialia, 2006, 54(20):5367-5375.

Zhong Z, Liu B, Sun L, et al. Dispersing and coating of transition metals Co, Fe and Ni on carbon materials[J]. Chemical physics letters, 2002, 362(1):135-143.

Chan J Y, Kauzlarich S M. Rare-earth halides as fluxes for the synthesis of tantalum and niobium carbide[J]. Chemistry of materials, 1997, 9(2):531-534.

Storms E K. The Refractory Carbides[M]. Academic Press New York, 1967.

Baklanova N I, Zima T M, Utkin A V, et al. Microstructure of TaC coatings on carbon fibers[J]. Inorg Mater, 2011, 47(7):728-732.

Chen Y J, Li J B, Wei Q M, et al. Preparation and growth mechanism of TaC_x whiskers[J]. Journal of Crystal Growth, 2001, 224(3-4):244-250.

Khyzhun O Y. XPS, XES, and XAS studies of the electronic structure of substoichiometric cubic TaC_x and hexagonal Ta₂C_y carbides[J]. Journal of alloys and compounds, 1997, 259(1):47-58.

Dai H, Wong E W, Lu Y Z, et al. Synthesis and characterization of carbide nanorods[J]. Nature, 1995, 375(6534):769-772.

Klabunde K J, Richards R. Nanoscale Materials in Chemistry[M]. Wiley Online Library, 2001.

Chen Z, Xiong X, Huang B, et al. Phase composition and morphology of TaC coating on carbon fibers by chemical vapor infiltration[J]. Thin Solid Films, 2008, 516(23):8248-8254.

Chen Z, Xiong X. Microstructure, mechanical properties and oxidation behavior of carbon fiber reinforced PyC/C-TaC/PyC layered-structure ceramic matrix composites prepared by chemical vapor infiltration[J]. Materials Chemistry and Physics, 2013, 141(2-3):613-619.

Bakshi S R, Musaramthota V, Virzi D A, et al. Spark plasma sintered tantalum carbide-carbon nanotube composite:Effect of pressure, carbon nanotube length and dispersion technique on microstructure and mechanical properties[J]. Materials Science and Engineering:A, 2011, 528(6):2538-2547.

Nieto A, Kumar A, Lahiri D, et al. Oxidation behavior of graphene nanoplatelet reinforced tantalum carbide composites in high temperature plasma flow[J]. Carbon, 2014, 67(0):398-408.

Li X, Westwood A, Brown A, et al. A convenient, general synthesis of carbide nanofibres via templated reactions on carbon nanotubes in molten salt media[J]. Carbon, 2009, 47(1):201-208.

Li X, Dong Z, Westwood A, et al. Preparation of a titanium carbide coating on carbon fibre using a molten salt method[J]. Carbon, 2008, 46(2):305-309.

Dong Z J, Li X K, Yuan G M, et al. Fabrication and oxidation resistance of titanium carbide-coated carbon fibres by reacting titanium hydride with carbon fibres in molten salts[J]. Thin Solid Films, 2009, 517(11):3248-3252.

Dong Z J, Li X K, Yuan G M, et al. Fabrication of protective tantalum carbide coatings on carbon fibers using a molten salt method[J]. Applied Surface Science, 2008, 254(18):5936-5940.

Li X, Yuan G, Westwood A, et al. The preparation and CVD densification of multi-walled carbon nanotube felt synthesized by a catalytic CVD method[J]. Chemical Vapor Deposition, 2008, 14(1-2):40-45.

Li X, Yuan G, Brown A, et al. The removal of encapsulated catalyst particles from carbon nanotubes using molten salts[J]. Carbon, 2006, 44(9):1699-1705.

Ci L, Wei J, Wei B, et al. Carbon nanofibers and single-walled carbon nanotubes prepared by the floating catalyst method[J]. Carbon, 2001, 39(3):329-335.

施引文献

资源附件(0)

访问统计